ARMODD Squarz 11 Pro Smart Watch User Manual

ARMODD Squarz 11 Pro Smart Watch

Product Information

The CZ Squarz 11 Pro is a smartwatch with sensors that enable Bluetooth, GPS, and touch functionality. It is compatible with Android and iOS operating systems and can be controlled through the WearPro application. The watch also features a side button and charging contacts for easy charging. It has a touch screen display and can display notifications and messages.

Thank you for purchasing our product.
Please read these instructions before use. The manufacturer is not liable for any damage caused by improper use.

Product description

Charging and Switching On

1. The smartwatch must be fully charged before first use. Always use the original charging cable supplied with the smartwatch. Always charge the smartwatch no longer than 2 hours and do not move it while it is being charged.
2. Connect the charging cable to the USB port of your laptop (it must be plugged in) or conventional mobile phone adapter (5 V) and attach the magnetic charging puck at the opposite end of the cable to the smartwatch’s charging surface.
3. If the smartwatch display does not activate on its own, gently press the side button for at least 3 seconds.

Pairing the watch with a mobile phone

To set the smartwatch, the current time and date and their proper operation, it is necessary that the smartwatch is paired with a mobile phone via the recommended WearPro app. Do not pair the smartwatch with your mobile phone via your phone’s Bluetooth; always use the app! You can download the appusing the QR code below or look it up in Google Play or the App Store.

1. During installation, we recommend that you allow all authorisations that you are requested, including running the app in the background.
2. Depending on your mobile phone model, we also recommend checking setting authorisations in the app management in your phone, especially location tracking.
3. Before pairing, activate Bluetooth (make sure it is visible for all devices for an unlimited time) and GPS in your phone. Do not pair the smartwatch using the Bluetooth menu of your phone.
4. Open the WearPro app. It is recommended that you create an account.
5. The smartwatch should be as close as possible to the phone during pairing.
6. By tapping on the “Device” icon on the bottom bar in the app, you can pair the smartwatch by scanning the smartwatch’s QR code (see “Quick set-up” – icon i)(Fig. 6) or manually (Fig. 1).
7. When pairing manually, tap on your device in the scanned devices shown. (Fig. 2)
8. Once the devices have been paired, set the required smartwatch functions in the app. (Fig. 3)
9. To enable more precise measurements, it is recommended that you fill in your personal profile in the app.

Language settings

Tap on the Settings icon in the watch and then on the Language icon and select the desired language.

The images here depict the Android OS. The appearance in iOS may differ.

Watch controls

• Press and hold the side button to turn the smartwatch on/off.
• Press the side button briefly to activate the display or to return to the menu.
• Swipe from left to right to show a list of calls, messages and the most recent functions used (Fig. 7).
• Swipe from right to left to show “Favourite functions”, and by tapping on “+”, add them or remove them by keeping your finger on the selected function.
• Swipe from top to bottom to show “Quick settings” (Fig. 6).
• Swipe from bottom to top to display the function list.
• Swipe from bottom to top and then from top to bottom to switch between functions.
• A short tap activates the function of your choice.

Press the side button gently. You can turn it carefully to change the watch faces or switch between functions.

Change the watch face

You may change it using several methods, both in the smartwatch and using the app.

1. By turning the side button.
2. Holding your finger on the display to show an overview of watch faces which you can select from by swiping from right to left. Tapping on the watch face of your choice to select it.
3. In “Settings” – Change watch face
4. Other watch faces can be added directly from the app. In the app, tap on the “Watch faces” (Fig. 3) and select from the gallery the desired watch face to be transferred to the smartwatch. (Loading all watch faces in the app may take several minutes due to the large amount of data and depending
   on the phone model.)

Watch face settings

Successful setting of the watch face requires that the smartwatch and the mobile phone are charged sufficiently.
In the app, tap on the “Watch faces” (Fig. 3) and then on any watch face in the gallery (Fig. 4) marked by a blue line in the upper right corner (usually watch faces in the first row). Tap again on the watch face (Fig. 5) and select whether to take a photo or select an image from your phone. Edit the image in the viewport. To transfer the image to the smartwatch, tap on “Start update” (Fig. 5). In the event of an error message during the upload, please check whether the size of the image is suitable and whether the phone and smartwatch are charged sufficiently. Then repeat the process. Loading all watch faces in the app may take several minutes due to the large amount of data and depending on the phone model.

Messages

To receive messages and notifications, your smartwatch must be paired with your phone, and the receipt of messages and notifications must be allowed in the WearPro app (Fig. 3). Furthermore, you must allow the app access to messages and notifications in the settings of your phone. (This is typically done during installation.)

Display activation by twisting the wrist

Allow and set up in the WearPro app in your phone (Fig. 3).

Calling

To activate this function, it is necessary to pair the smartwatch with your phone’s Bluetooth.

1. Make sure Bluetooth is on in your phone.
2. Tap on “BT call” on the smartwatch and allow the function (Fig. 7).
3. Tap on “Bluetooth calling” in the WearPro app (Fig. 3) and pair the smartwatch with the phone. Always pair the smartwatch with your phone’s Bluetooth only via the app.

If the function is permitted and the smartwatch is paired with your phone, you may make and answer calls both on the smartwatch and your phone. Up to 20 contacts can be saved on the smartwatch via the app. Open “Favorite contacts” in the app (Fig. 3) and tap on “+Add contacts”. Select the desired contact from your list and tap on “Synchronize” to save.
The calling function can be switched off anytime and turned back on by tapping on “BT call” on the smart-watch (Fig. 7).

Function menu

This list of functions may vary depending on the specific version of the smartwatch and app.
Other functions must be set and allowed in the WearPro app (Fig. 3), and their operation depends on both the specific phone model and settings as well as the current version of the smartwatch. These are, for example, notifications of incoming calls, messages, notifications from social media, alarm clock, “Do not disturb” mode
(DND mode), continuous heart rate measurement (takes place automatically in the set interval), physiological cycle, non-activity reminders, drinking regime, activating the display by twisting the wrist and others.

Important notifications, recommendations and FAQs

1. To save the values measured and the current date and time, make sure you synchronize the smartwatch with the app on a daily basis. During the night, the values measured by the smartwatch may reset.
2. This product is not a medical device. Neither the smartwatch nor the app are intended for the diagnosis, treatment or prevention of illnesses and symptoms thereof. The values measured are illustrative and may differ from values measured by certified medical devices as well as because of the method of measurement and tightness of the strap. The sensor on the reverse side of the smartwatch must be in contact with the wrist, and the strap must be tight. If the strap is loose and the sensors dirty, the precision of the measurements will be compromised.
3. In order to ensure correct date and time settings, the smartwatch must be paired with a phone. Then the date and time will be set automatically.
4. The smartwatch has the IP67 degree of protection. We recommend avoiding contact of the smartwatch with water under pressure, fast and rapidly flowing water, spraying and hot water and steam, because when using the smart watch, due to wear and tear of the case or its mechanical damage and microscopic cracks in the seal, water can penetrate into the smartwatch and cause damage.
5. You have stopped receiving incoming calls or SMS notifications – check that the smartwatch is paired with your phone and the notifications are allowed in the app (Fig. 3) and in the settings of your phone, and that the do-not-disturb mode has not been activated in the app. Make sure Bluetooth is on in your phone. Do not pair the smartwatch via the phone’s Bluetooth menu.
6. The smartwatch cannot be paired with a phone possible solutions:
   • make sure the smartwatch and phone are charged sufficiently
   • make sure your phone’s Bluetooth and GPS are switched on and you have allowed your location/ position to be tracked in your phone’s settings
   • place the smartwatch and the phone next to each other
   • check the system updates in your phone
   • uninstall and re-install the app
   • restart your phone and switch the smartwatch off then back on again
   • make sure your phone meets the technical requirements (Android 5.1+, iOS 9.0+, Bluetooth 5.0+)
7. The green sensor light is blinking – data measurement or transfer is underway.
8. The green sensor light blinks even when the smart-watch is not being worn – it is not a flaw.
9. To ensure the correct functioning of the smartwatch, we recommend restarting or resetting the smartwatch occasionally and, where a newer version is available, updating firmware in the app. Make sure you always have the most recent version of the app.
10. Always charge the smartwatch for no more than 2 hours (at no more than 5 V). Improper charging reduces the capacity and useful life of the battery. Battery life depends on the ambient temperature and the number of functions actively running. Running some functions may run the battery flat within several hours. Over time the capacity of the battery will reduce naturally. If not used, do not leave the smartwatch flat for an extended period of time and recharge the battery regularly.
11. Protect the smartwatch from falls or impact; do not expose it to extreme temperature or direct sunlight. These conditions may cause malfunctions, or they can cause irreparable damage. Keep the smartwatch at room temperature if not in use.
12. The smartwatch has a built-in battery. Do not expose it to flames or extreme temperature due to risk of explosion.
13. Do not disassemble the smartwatch or its accessories.
14. Do not use the product in close proximity to explosives and chemicals.
15. Keep the product out of reach of children. It may contain small parts posing risk of inhalation.
16. The smartwatch software and the application itself are innovated on a continuous basis. Therefore, the manufacturer reserves the right to amend the instructions and individual functions without prior notice.
17. We do not recommend exposing the smartwatch to sudden changes in pressure (e.g. diving, some water sports, etc.) or to liquids other than fresh water. Never use the buttons if the case is in contact with water. Water could penetrate into it and damage the smartwatch. After the smartwatch comes into contact with water, dry it
18. Should you have any questions, do not hesitate to contact the manufacturer.

Warning: All images and description of functions may differ based on your version of the product and are used for illustrative purposes only.

Safe disposal

Do not dispose of the product in general waste as it may contain substances harmful to the environment.

Battery removal instructions

The product contains a built-in battery that may contain harmful substances and, as such, should not be disposed of in general municipal waste. You can remove the battery and hand it in for safe disposal.
If you have decided to remove the battery, we recommend that you contact a qualified expert. In any case, let the battery run flat completely and then use a knife to carefully remove the back cover. One by one, snip the wires to the battery and remove battery carefu-lly so as to avoid damage to the battery and electrolyte leakage. Use the proper PPE and follow the applicable occupational health and safety rules to avoid injuries.

Electronic waste
Leave the product at a dedicated electronic waste collection facility where its recycling or safe disposal is ensured. Contact your local municipality for a list of waste collection sites, or you can leave the used product with the seller.

• Frequency band: 2402–2480 MHz
• Max. performance: 1.06 dBm

Declaration of conformity

SMARTOMAT s.r.o. hereby declares that the ARMODD Squarz 11 Pro device complies with Directive 2014/53/EU. The full version of the EU declaration of conformity is available at this website: www.armodd.com

Technical support

Do you have any questions regarding your product? Do not hesitate to contact us.
email: info@armodd.com
www.armodd.com
Manufacturer:
SMARTOMAT s.r.o.,
1.máje 97, 460 02 Liberec, Czech republic

References

• ARMODD – smart watch
• ARMODD.CZ |⌚️Elegantní chytré hodinky v češtině
• ARMODD – smartwatch
• ARMODD.HU |⌚️magyarul tudó elegáns okosórák
• ARMODD – smartwatch
• ARMODD – smartwatche
• ARMODD.RO |⌚️ ceasuri elegante în limba română
• ARMODD – inteligentné hodinky

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>