GYROOR S300 Hovershoes User Manual

: June 3, 2024
: GYROOR

Table of Contents

S300 Hover shoes
Riding Safety
Packing List
Learning to Ride
Calibration and Alarms
Maintenance
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GYROOR Looog S300 Hover shoes
User Manual

S300 Hover shoes

Thanks for choosing the Hover shoes.
To enjoy the many features of your Hover shoes, you must read and follow these instructions. Enjoy your ride!

GYROOR S300 Hovershoes - Fig

Riding Safety

The Hover shoes are the recreational prod uct. Before mastering riding skills, you need to practice. Neither Gyroor Technology (CHINA) Co.f Ltd nor Shenzhen Chita do Technology Co., Ltd is responsi ble for any injuries or damage caused by a rider’s inexperience or failure to follow the instructions IF document,
Remember that whenever you ride the Hover shoes, you risk injury or death from loss of control, collisions, and falls. You can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. When riding in public spaces always comply with local laws a nd regulations. As with other vehicles, faster speeds require longer braking distance. Sudden braking cn smooth surfaces could lead to wheel slip, loss of balance, or falls. The Hover shoes are designed to be ridden on a flat hard surface which Is free of obstacles and bumps. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.
Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and provides protection for the back of your head.
Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, bicycles, or other obstacles and potential hazards.
Respect pedestrians by always yielding the right of way. When approaching a pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Pass on the left whenever passible. Please obey local traffic laws and regulations.
In places without law sand comply with the safety guidelines outlined in this manual. Neither nor Shenzhen Chit ado Technology Co., Ltd Is responsible for any property damage, personal injury/death, accidents, or legal caused by violations of the safety instructions.
Do not allow anyone to ride your Hover shoes on his/her own unless he/she has carefully read this manual, and followed the New by scanning the QR Code on the Welcome Card. The safety of new riders [s your responsibility. Assist new riders until they are comfortable with the basic operation of the Hover shoes. Make su re each new rider wears a helmet and other protective gear.
Before each ride check for loose fasteners and damaged components. If the Hover shoes make abnormal sounds or signa Isan alarm, stop riding immediately and contact after-sales service
Be alert! Scan both far a head and in front of your Hover shoes your eyes are your best tool for safely avoiding obstacles and contraction surfaces (including, but not limited to, wet ground, loose sand loose gravel, and ice).
To reduce risk of injury, you must read and follow all “CAUTION”( ),”Tips” (*),and “WARNING” notices in this document. Do not ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer recommends riders be 6+ years old. Always follow these safety instructions:
A. People who should not ride the Hover shoes include:
I. Anyone under the influence of alcohol or drugs.
ii. Anyone who suffers from disease that puts himself/herself at risk if he/she engage resin strenuous physical activity.
iii. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.
iv. Anyone whose weight is outside the stated limits (see Specifications).
v. Pregnant women.
B. Riders under the age of 16 years old should ride under adult supervision.
C. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.
D. To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.
E. Do not ride in the snow, in the rain, or on roads which are wet, muddy, icy, orthant are slippery for any reason. Do not ride over obstacles (including, but not limited to, sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a fall.
F. Do not ride the Hover shoes in the rain. Riding in the rain may cause the Hover shoes to be immersed in water, resulting in function damage and even a risk of fire and explosion due to a wet battery pack. Damage and losses caused by water submersion are not covered by the Limited Warranty.
G. Do not accelerate or decelerate suddenly. If the Hover shoes tilts back, you have reached the speed limit, slowdown. Do not overpower the speed limiter or you risk injury from loss of control, collisions and falls.
Do not attempt to charge your Hover shoes, if the charger or the power outlet is wet.
As with any electronic device, use a surge protector when charging to help protect your Hover shoes from damage duet power surges and voltage spikes. Only use the Gyro or supplied charger. Do not use a charger from any other product.
Use only Gyro or approved parts and accessories. Do not modify your Hover shoes. Modifications to your Hover shoes could interfere with the operation of the Hover shoes, resulting serious injury and/or damage, and could void the Limited Warranty.

Packing List

When unpacking your Hover shoes, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or nearest service center. Please retain the box and packaging materials in case you need to ship your Hover shoes in the future. Always power off your Hover shoes and unplug the charge cable before cleaning.
B. Diagram

Power ON/OFF:
**** The Hover shoes must be on the ground when powered on or off. To avoid injury do not touch the wheel with any part of your body.
Power on: Press the power button, the power level indicator lights will turn on and the Hovershoeswill beep once.
Power off: Press the power button, the power level indicator lights will turn off and the Hover shoes will beep once.
Glow light: After the Hover shoes are powered on, if the electricity is more
than 40%, the Hover shoes will show a green light; if the electricity is less
than 40%, the Hover shoes will show a yellow light; if the electricity is less
than 10%, the Hovers hoes will show a red light.

Handle: While the Hover shoes are powered off, use the handletoliftand carry.
** Always turn off the Hovers hoes before you lift it often ground.
Charging**

a) Open the rubber cap
b) Insert the plug into the charge port

You can charge both mainframes at the same time.
Your Hover shoes are fully charged when the LED on the charger changes from red (charging) to green (trickle charge). Close the rubber cephem not charging.
Before riding

There are safety risks when learning to ride the Hover shoes. You must read this User Manual andfollowthe New iderTutorial by scanning the QR code on the Welcome Card before your first ride.
Whenever the Hover shoes are powered on, they must stay on the ground. To avoid injury, do not touch the wheel with any part of your body.

Standby Mode: The Hovershoeswill enter Standby Mode when the Hover shoes are powered on and parked on the ground.| Balance Mode: The Hover shoes will enter Balance Mode when they a re gently touched on the tilted end.| If the Hover shoes do not detect a rider within 3 minutes after entering Balance Mode, the Hover shoes will be cowered off automatically.

A Do not press the edge of the Hover shoes while in Balance Mode if you are not riding it. Doing so could force the Hovershoes to move rapidly. It may lead to serious injuries for you or others.
Features

a. There is no front or backofthe Hover shoes. You can step on from either direction.
b. When the Hovers hoes a re in Balance Mode, place one foot on the middle of the mainframe’s foot mat. Give gentle pressure on the front end of the foot mat, the Hover shoes will go forward; give gently pressure on the rear end of the foot mat, it will go backwards.

If the Hover shoes cannot enter Balance Mode and beeps an alarm, try restarting them. If the problem persists, please contact aftersales service.
c. The Hover shoes are very sensitive. Relax when riding and keep your center of gravity steady.

Learning to Ride

Warning
Rider must weigh between 22-220ibs (0-100kg)

Wear an approved helmet and other protective gear to minimize any possible injury.

Vehicle Control Practice a. Turn on one mainframe, put single foot on the middle of the foot mat, then swing backend forth to feel the control.
**** b. Switch to the other foot, then swing backend forth to feel the control.
Get Reedy Ask a friend to assist you on your first ride. Go to a large open area. Place both mainframes shoulder width apart and putt hem into Balance Mode.
Stepping On
With assistance from your friend, put one foot on the middle ofthe mainframe’s foot mat. When comfortable, stand straight and look straight ahead while stepping up with your other foot. Try to avoid rocking backend forth.
Ride
With your friend nearby, slowly lean forward and feel the Hover shoes move forward. Slowly lean backward and feel it move backwards. Turn your whole body left or right gently to turn the Hover shoes.
Stepping Off
To step off, gently slow down to a controlled stop. Slowly shift your weight to one foot and place your opposite foot on the ground.

7. Learning More
Scan the QR code on the Welcome Card to follow the New Rider Tutorial before you ride and to learn more ways to play.
8. Warnings
You must read and understand the Warnings and Riding Safety instructions in this manual before attempting to ride the Hover shoes. Failing to follow these warnings could result in death or serious injury due to: loss of balance, traction or control; collisions; falls.

Do not ride on public roads, motorways,
highways, or streets.| Do not traverse bumps or uneven terrain.
Avoid slopes steeper than 10°.| Do not ride through puddles or other bodies
of water. Do not get the Hover shoes Drift wet.

Do not ride over holes, curbs, steps, or other obstacles.| Do not carry any passengers. Do not carry a chill not ride when pregnant.| Do not accelerate when the Hovershoeswill accord sound
an alarm. do not accelerate when the speed limiter is activated. Slowdown.
Do not attend pt. stunts of injury of
any kind. Always keep both feet on the foot mats.| Do not rockbackand forth or shift your weight abruptly.| Do not ride on low traction surfaces (including, but not limited to, wet ground, loose sandgrouse gravel, and ice).

Do not lift the Hovers hoes when powering on or after powered on. The wheels will spin, causing a high risk of injury.| Do not ride with high heels. Always ride with properly strapped closed toe shoes.| **** Do not press the edge of the Hover shoes while in Balance Mode if you are not riding them. Doing so could force the Hovers hoes to move rapidly. lit may lead to serious injuries for you or others.

Avoid contacting obstacles with the tire/wheel| Watch your head when passing through doorways.

Calibration and Alarms

Calibration

When in Balance Mode, if the Gyro shoe moves forward or backward on its own on flat ground, it needs to be calibrated.
If the problem persists, please contact after-sales service.
To Calibrate the Gyro shoe:
Place the Gyro shoe upside down on flat ground and power it off, press the power button for 5 seconds till you heart beep 3 times. This will complete the calibration.
** Once powered on, the Gyro shoe must stay on the ground.To avoid injury do not touch the wheel with any part of your body.
Alarms
a. Overheating
Riding for an extended period of time could increase the internal temperature of your Hover shoes in excess of 122 F(50°C). If this happens, the glow lights will flash red, an alarm will sound and your Hovers hoes will not be able to charge. Simply step off the Hover shoes, power them off, and give them time to cool backdown to a normal operating temperature.
To avoid injury, do Nott ouch or rid the Hover shoes while there is an alarm and the glow lights are flashing red.
b. Other Alarms**
For any other alarms, try restarting your Hovers hoes. If the problem persists, please contact after-sales service.

Maintenance

Cleaning and Storing Your Hover shoes
Use a soft, wet cloth to wipe the mainframe clean. Stubborn dirt can be scrubbed with a toothbrush and tooth paste, then cleaned with a soft, wet cloth.
NOTE
Do not wash your Hover shoes with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your Hover shoes. Do not wash your Hover shoes with a power washer or high pressure hose.
**WARNING
Make sure the Hover shoes are powered OFF, the charging cable is unplugged, and the rubber cap on the charge Portis tightly sealed before cleaning; otherwise you may expose yourself to electric shock or damage the electronic components. Store your Hover shoes in a cool, dry place. Do not store them outdoors for extended periods of time. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.
Battery Pack Maintenance
Do not store or charge the battery attemperators outside the stated limits (see Specifications). Do not expose the battery to fire. Do not discard or destroy the battery. Refer to your local laws and regulations regarding battery recycling and/or disposal. A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at its best; whereas using it attemperators below32°F (0°C) can decrease range and performance. Typically, at 14°F(-10°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises.
NOTE
Typically, a fully charged battery should retain charge for 120-180 days. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record the charge discharge condition of the battery; damage caused by over- discharge or under-discharge will not be covered by the Limited Warranty.
WARNING
** WARNING – Risk of Fire-No User Serviceable Parts
AVERTISSEMENT- Bisque d’incendie-Aucune des pieces ne putter 4pare purl’ utilisateurs Units are not intended for use at elevations greater than 2000 m above sea level
Prolonged Exposure to UV Rays, Rain and the Elements May Damage the Enclosure Materials. Store Indoors When Not in Use.

Specifications

Product	Name	Hover shoes S300
dimension,	unit (single wheel)	251.9×178.2×111.2 miRNA
Weigh	Payload	22-220 lbs. (10-100 kg)
Net (single wheel)	Approx. 7.7 lbs (3.5 kg)
Rider	Recommended Age	64- years old. See the weight limit
Machine Parameters	Max. Speed	Approx. 6.5 mph (10 km/h). Top speed will vary

[1] Typical Riding Time: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 5 mph (8 km/h) average speed on flat hard ground.
[2] Max. Slope: tested while riding with the payload of 165 lbs. (75 kg) and speed less than 3 mph (5km/h).
Certification
Electromagnetic Compatibility Directive & Low-Voltage Directive
Shenzhen ChitadoTechnology Co., Ltd, declares that the equipment listed in this section are in compliance with three quire mints and other relevant provisions of Directives 2014/30/EU & 2014/35/EU.
Trademark and Legal Statement
GYROOR and Hover shoes are trademarks of Shenzhen ChitadoTechnology Co., Ltd, registered in China and other countries.
The respective owners reserve the rights of their trademarks referred to in this manual.
The Hover shoes is covered by relevant patents. For patent information go to http://www.gyroorboard.com.
We have attempted to include descriptions and instructions for all the functions of the Hover shoes at the time of printing.
However, your Hover shoes may differ slightly from the one shown in this document.
Please note that there are multiple Hover shoes models with different functions, and some of the functions mentioned herein
may not be applicable to your unit. The manufacturer reserves the righto change the design and functionality of the Overshoes product and documentation without prior notice. @2018 Shenzhen ChitadoTechnology Co., Ltd. All rights reserved.

www.gyroorboard.com

Learn more News about the Gyro or hoverboard?
Scan on “Gyroorboard” Messenger QR code to get it soon.
The manufacturer reserves the right to make changes to the product, and update tills manual at any time. Visit www.gyroorboard.com to download the latest user manual.

https://www.facebook.com/gyroorboard
Learn more News about the Gyro or hoverboard ?
Scan on “Gyroorboard” Messenger QR code to get it soon.
Gyro or is not responsible for damage caused by unreasonable
use, please watch Gyros instructional video before use.