NetComm NS-02 CloudMesh Satellite Access Point User Guide
- June 3, 2024
- NetComm
Table of Contents
NS-02 CloudMesh Satellite Access Point
**User Guide
**
NS-02 CloudMesh Satellite Access Point
WHAT YOU WILL NEED
SOURCE CODE – GNU General
Public License
This product includes software code that is subject to the GNU General Public
License (“GPL”) or GNU Lesser General Public License (“LGPL”). This code is
subject to the copyrights of one or more authors and is distributed without
any warranty. A copy of this software can be obtained by contacting NetComm.
Your CloudMesh Satellite works best when it is placed in a central location to
the area you want to cover. Ideally, it should be located no more than two
rooms away from the CloudMesh Gateway.
Before you begin, ensure your CloudMesh
gateway is connected to the Internet.
-
Connect the Power Adapter to the CloudMesh Satellite. Ensure that the power switch is in the ON position.
Wait ten minutes for the CloudMesh
Satellite to initialize and then check the light status. A solid white or blue
light means the satellite has been paired with the Gateway and is ready to
use. -
A solid red light means that the Satellite needs to be moved closer to the Gateway. If after ten minutes, the light is still flashing blue, follow the instructions on page 14.
Your CloudMesh Satellite light follows this sequence when first turned on:| Blinking green| Powering up
---|---|---
| Blinking blue| Ready for pairing
See the next page & page 14 for more instructions
When connected to the CloudMesh Gateway, the light shows the signal strength
as follows:
| Solid white| Good signal
---|---|---
| Solid blue| Medium signal
| Solid red| Poor signal
| Blinking blue| No signal / too far from gateway / not connected
to mesh network
You can extend the range of your network using multiple CloudMesh Satellites.
These can be wirelessly connected to the CloudMesh Gateway.
Once you have decided where to place the CloudMesh Satellites, always power up
the Satellite closest to the CloudMesh Gateway first. Once you have confirmed
this Satellite is working, then power up and connect the second CloudMesh
Satellite.
The light may also show as:
| Solid pink| Paired but no Internet connection
---|---|---
| Blinking purple| WPS pairing activated
| Blinking pink| Pairing in progress
| Solid green| Wired connection to NF20MESH
Note: Refer to the User Guide for a full set of light statuses.
You can extend the range of your network using multiple CloudMesh Satellites.
These can be wirelessly connected to the CloudMesh Gateway.
-
Once you have decided where to place the CloudMesh Satellites, always power up the Satellite closest to the CloudMesh Gateway first. Once you have confirmed this Satellite is working, then power up and connect the second CloudMesh Satellite.
There are multiple ways your CloudMesh
Satellites could connect to your CloudMesh Gateway to provide whole home
wireless coverage.
If the CloudMesh Satellite light is still blinking blue after five minutes, you will need to pair it with the CloudMesh Gateway. -
Place the CloudMesh Satellite next to your CloudMesh Gateway. Ensure that the CloudMesh Gateway is connected to the Internet.
-
Press and release the WPS button on the Satellite, then press and release the WPS button on the Gateway within two minutes.
| 
---|---
WIRELESS BRIDGE
The CloudMesh Satellite can provide Internet access to devices that are not wireless, such as desktop PCs or Smart TVs. Up to two devices may be connected in this way per CloudMesh Satellite, connecting at the back of the Satellite using the included yellow network cable.
| 
---|---
WIRED MESH
For the best possible wireless performance, you can connect the CloudMesh
Satellite to your CloudMesh Gateway using an Ethernet cable. This allows you
to extend the range of your network when the satellite is not in the wireless
range of your gateway.
DOWNLOAD THE CLOUDMESH APP
Finding the best place for your CloudMesh Satellite is easy using the CloudMesh App.
- Satellite placement assistance
- WiFi Analytics
- WiFi Troubleshooting
- Setup does not require the App
https://apps.apple.com/au/app/cloudmesh/id1510276711
https://play.google.com/store/apps/details?id=com.casa_systems.cloudmesh&hl=en_AU
Get it on the App Store or Google Play.
casa systems
NetComm Wireless Limited is part of Casa Systems, Inc.
Casa Systems, the future of NetComm
ANZ HEAD OFFICE
SYDNEY
Casa Systems Inc.
18-20 Orion Road, Lane Cove
NSW 2066, Sydney
Australia | +61 2 9424 2070
www.netcomm.com| CORPORATE HEADQUARTERS
ANDOVER
Casa Systems Inc.
100 Old River Road,
Andover, MA 01810
USA | +1 978 688 6706
www.casa-systems.com
---|---
MPRT-00040-000 – NS-02 – Rev 4
Documents / Resources
|
NetComm NS-02 CloudMesh Satellite Access
Point
[pdf] User Guide
NS-02, CloudMesh Satellite Access Point, Satellite Access Point, loudMesh
Satellite, Access Point, Satellite
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>