NetComm NF20 Wi-Fi 6 Gateway User Guide
- June 6, 2024
- NetComm
Table of Contents
NetComm NF20 Wi-Fi 6 Gateway
PRE-CONFIGURED?
If you received your gateway from your service provider and they have provided
you with their own instructions, refer to those to complete the setup. In some
cases, the gateway has been pre-configured for you and is ready to use.
Otherwise, you will need to complete the setup yourself.
BEFORE YOU BEGIN
Ensure that you have the following information from your service provider:
- How your Internet service will physically connect to your gateway
- The Settings specific to your type of service.
There are two ways to connect your gateway to the Internet service:
Ethernet WAN
This is the most common access type in Australia and New Zealand and covers
fixed line technologies such as nbn™ FTTP, HFC, FTTC as well as UFB Fixed
Wireless and Sky Muster™ satellite services. This type of Internet service
uses the red WAN port on the back of the gateway to connect to the dedicated
connection box installed by your access network provider.
ADSL or VDSL
These access types are provided by nbn™ FTTB, FTTN or ADSL/VDSL over a
traditional telephone line. This connection uses the grey DSL port on the back
of the gateway.
SOURCE CODE – GNU
General Public License This product includes software code that is subject
to the GNU General Public License (“GPL”) or GNU Lesser General Public License
(“LGPL”). This code is subject to the copyrights of one or more authors and is
distributed without any warranty. A copy of this software can be obtained by
contacting NetComm.
ETHERNET WAN CONNECTIONS
ADSL / VDSL CONNECTIONS
- Turn on the Wi-Fi 6 Gateway. Wait a few minutes for it to start up.
- Type the network name and password on the Wi-Fi Security Card into your wireless device when connecting or scan the QR code.
CONNECTING WITH WI-FI
TYPE
SCAN
CONFIGURING YOUR GATEWAY
To complete the setup, you will need the following information from your service provider:
- Internet service type (ADSL/VDSL/Ethernet WAN)
- Connection type (PPPoE/PPPoA/Dynamic IP/Static IP)
- Other specifics depending on your connection type including 802.1P priority, VLAN Tag, WAN IP Address, Subnet Mask and DNS Servers
- VoIP settings from your service provider if you intend to use a phone with your service.
When you have the necessary information, follow these steps:
- Open a web browser and type 192.168.20.1 into the address bar, then press Enter.
- At the login screen, type admin into the Username field. In the Password field, type the unique password printed on the label on the bottom of the gateway, then click on the Login > button
- Follow the Basic Setup to complete the configuration.
WI-FI / LIGHTS TURNING ON & OFF
- Press and hold for more than 6 seconds
- Press and hold for more than 6 seconds
TELEPHONE CONNECTION
NetComm Wireless Limited is part of Casa Systems, Inc. Casa Systems, the future of NetComm
AU
ANZ HEAD OFFICE SYDNEY
Casa Systems Inc.
18-20 Orion Road, Lane Cove NSW 2066, Sydney
Australia | +61 2 9424 2070
www.netcomm.com
US
100 Old River Road,
Andover, MA 01810
USA | +1 978 688 6706
www.casa-systems.com