vtech 555111 Burnout the Velociraptor Instruction Manual
- June 4, 2024
- vtech
Table of Contents
Instruction Manual
Burnout the Velociraptor
VTech understands that a child’s needs and abilities change as they grow and with that in mind we develop our toys to teach and entertain at just the right level…
Toys that will stimulate their interest in different textures, sounds, and
colors|
Interactive toys to develop their imagination and encourage language
development|
Cool, aspirational and inspiring computers for curriculum-related learning
---|---|---
I am… …responding to colors, sounds, and textures
…understanding cause and effect
…learning to touch, reach, grasp, sit-up, crawl and toddle| I want…
…to get ready for school by starting to learn the alphabet and counting
…my learning to be as fun, easy, and exciting as can be …to show my creativity
with drawing and music so my whole brain develops| I need…
…challenging activities that can keep pace with my growing mind
…intelligent technology that adapts to my level of learning
…National Curriculum based content to support what I’m learning at school
To learn more about this and other VTech® products, visit www.vtech.co.uk
INTRODUCTION
Time for some roaring fun with Switch & Go Dinos® Burnout the
Velociraptor! This wild Switch & Go Dino is an exciting 2-in-1 toy that
switches between a tough Velociraptor and a cool Motorbike! Push the Seat Pad
to trigger automatic switching from a Motorbike to a Velociraptor! Press the
Sounds Button to hear fun phrases and cool
sound effects! Let’s Switch & Go!
INCLUDED IN THE PACKAGE
- Switch & Go Dinos® Burnout the Velociraptor
- WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords, and packaging screws are not part of this toy and should be discarded for your child’s safety.
NOTE: Please keep this instruction manual as it contains important information.
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
- Make sure the unit is turned OFF.
- Locate the battery cover on the roof of the unit. Use a screwdriver to loosen the screw. Then, remove the cover.
- If a used battery is present, remove this battery from the unit by pulling up on one end of the battery.
- Install 1 new AAA (LR03/AM-4) battery following the diagram inside the battery box. (The use of a new alkaline battery is recommended for maximum performance).
- Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly is required for battery installation.
Keep batteries out of reach of children.
IMPORTANT: BATTERY INFORMATION
- Insert batteries with the correct polarity (+ and -).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Do not short-circuit the supply terminals.
- Remove batteries during long periods of non-use.
- Remove exhausted batteries from the toy.
- Dispose of batteries safely. Do not dispose of batteries in a fire.
RECHARGEABLE BATTERIES:
- Remove rechargeable batteries from the toy before charging.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not charge non-rechargeable batteries.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on their
respective packaging, indicates they must not be disposed of in domestic waste
as they contain substances that can be damaging to the environment and human
health.
The chemical symbols Hg, Cd, or Pb, where marked, indicate that the battery
contains more than the specified value of mercury (Hg), cadmium (Cd), or lead
(Pb) set out in the Batteries and Accumulators Regulation.
The solid bar indicates that the product was placed on the market after 13th
August 2005.
Help protect the environment by disposing of your product or batteries
responsibly. VTech ® cares for the planet.
Care for the environment and give your toy a second life by disposing of it at
a small electrical collection point so all its materials can be recycled.
In the UK:
Visit www.recyclenow.com to see a list of
collection points near you.
In Australia & New Zealand:
Check with your local council for kerbside collections.
PRODUCT FEATURES
-
Off/Low/High Volume Switch
To turn the unit On, or to adjust the volume, slide the switch to the Low or High Volume position. To turn the unit off, slide the switch to the Off ****position. -
Sound Button
Press the Sound Button to hear fun phrases and cool dinosaur sounds in Dino mode. In Vehicle mode, press the Sound Button to hear fun phrases and great vehicle sounds. -
Seat Pad
Push the Seat Pad to trigger automatic switching from Vehicle to Dino. -
LED Lights
The LED Lights will flash along with the sounds in Dino mode and Vehicle mode. -
Automatic shut-off
To preserve battery life, the unit will automatically shut off after approximately 20 seconds without input. The unit can be woken up again by pressing the Sounds Button , or by switching between Dino and Vehicle modes. The unit will also automatically turn off when battery power is very low.
HOW TO SWITCH
|
---|---
1. Dino mode.| 2. Push the tail into the body.
|
3. Push the feet inwards together, then turn the feet up.| 4. The unit is
now in Vehicle mode.
5. Push the Seat Pad to trigger automatic switching from Vehicle to Dino.
CARE & MAINTENANCE
- Keep the unit clean by wiping it with a slightly damp cloth.
- Keep the unit out of direct sunlight and away from any direct heat sources.
- Remove the batteries if the unit will not be in use for an extended period of time.
- Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow these steps:
- Turn the unit Off.
- Interrupt the power supply by removing the batteries.
- Let the unit stand for a few minutes, then replace the batteries.
- Turn the unit back On. The unit should now be ready to use again.
- If the unit still does not work, insert a new set of batteries.
If the problem persists, please contact our Consumer Services Department and a service representative will be happy to help you.
CONSUMER SERVICES
Creating and developing VTech® products is accompanied by a responsibility
that we at VTech ® take very seriously. We make every effort to ensure the
accuracy of the information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know that we stand
behind our products and encourage you to call our Consumer Services Department
with any problems and/or suggestions that you might have. A service
representative will be happy to help you.
UK Customers:
Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK)
Website: www.vtech.co.uk/support
Australian Customers: Phone: 1800 862 155
Website: upport.vtech.com.au
NZ Customers:
Phone: 0800 400 785
Website: support.vtech.com.au
PRODUCT WARRANTY/
CONSUMER GUARANTEES
UK Customers:
Read our complete warranty policy online at
vtech.co.uk/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer
guarantees apply to goods and services supplied by VTech
Electronics (Australia) Pty Limited. Please refer to
vtech.com.au/
consumer guarantees for further information.
Visit our website for more
information about our products,
downloads, resources, and more.
www.vtech.co.uk
www.vtech.com.au
TM & © 2021 VTech Holdings Limited.
All rights reserved.
IM-531500-001
Version: 0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>