Extron MLM 100 AAP Card Mount Kit Installation Guide
- June 3, 2024
- Extron
Table of Contents
MLM 100 AAP and MLM 200 AAP
Installation Guide
MLM 100 AAP Card Mount Kit
This guide provides instructions for installing the Extron Mounting faceplates, which are designed for use with the MLC Plus 100 and MLC Plus 200 MediaLink controllers, NBP 100 and NBP 200 network button panels, and EBP 100 and EBP 200 eBUS button panels.
US Gang| Mud Ring Installation
Cutout Dimensions| Direct Mounting
Cutout Dimensions
---|---|---
4| 7.6″ W x 3.75″ H
193 mm W x 95 mm H| 7.3″ W x 2.9″ H
185 mm W x 74 mm H
5| 9.5″ W x 3.95″ H
241 mm W x 100 mm H| 9.1″ W x 2.9″ H
231mm W x 74 mm H
NOTE: If the unit is NOT installed in a mud ring, you MUST install the
plastic spacer. The spacer positions the unit to allow the magnetic faceplate
to attach properly and securely.
NOTE: Place the AAP plates as close together as possible. Do not leave
gaps between plates.
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the Extron Safety and Regulatory Compliance Guide on the Extron website.
© 2017-2021 Extron
All rights reserved.
www.extron.com
All trademarks mentioned are the property of their respective owners.
68-3138-50 Rev. C
08 21
Documents / Resources
|
Extron MLM 100 AAP Card Mount
Kit
[pdf] Installation Guide
MLM 100 AAP, MLM 200 AAP, Card Mount Kit, MLM 100 AAP Card Mount Kit, Mount
Kit, Kit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>