atomi Qi Wireless Wake 10W Wireless Charger plus 1W Alarm Clock User Manual
- June 3, 2024
- atomi
Table of Contents
atomi Qi Wireless Wake 10W Wireless Charger plus 1W Alarm Clock User Manual
Charging Your Wireless Device
Plug your Qi Wireless Wake into a USB charger. (USB charger not included)
Please use QC 2.0 or higher adapter to enable fast charge.
Inse the device in your Qi Wireless Wake. Charging will begin on contact.
Reading the Indicator Lights
Blue light:
Your device is charging.
Green light:
Your device is fully charged and is in standby mode.
NOTE: For iOS® devices, the green light indicating a full charge will not turn on.
Light activates when phone is inseed and begins charging. Glowing light slowly cycles between high light to low light while charging.
Seing Up Your Clock
Press clock set buon for 3 seconds to adjust alarm and clock time with scroll wheel, press clock set again to set time. Clock time blinks while adjusting.
a) Press and hold clock set for 3 seconds to set up time.
b) 1st press for alarm hour setup, 2nd press for alarm minute setup, 3rd
press for hour setup and 4th press for minute setup. Scroll wheel to adjust.
Press clock set to confirm and move on to next step. Returns back to normal
mode if no action is made aer 15 seconds.
Alarm
The alarm icon indicates alarm setup is on. At the set time, the alarm will
sound for 1 minute (60 seconds). Press clock set once to turn OFF alarm. The
alarm will turn o automatically aer 1 minute if no buon is pressed.
Snooze
While the alarm is sounding, press the snooze buon to temporarily silence the
alarm for 5 minutes. The alarm will repeat for 1 minute aer 5 minutes of
standby.
Screen Brightness
When the alarm is not ringing, press snooze to adjust screen brightness
(strong, middle & weak).
Caution
If you have an implanted medical device, including pacemaker, implanted
cardioveer defibrillator, etc., you should:
- Keep the Qi Wireless Wake more than 6 inches away from the medical device.
- Unplug the Qi Wireless Wake if you think it is inteering with your medical device.
- Follow the directions that came with your medical device.
Aention
Pas of the Qi Wireless Wake are magnetized. Do not put credit cards or other
magnetic storage devices near the Qi Wireless Wake as information may be
erased.
Safety Information
Taking care of your Qi Wireless Wake will protect your warranty coverage. Here is how to properly care for your atomi Qi Wireless Wake:
- Keep it dry—any moisture, including humidity, can corrode electronic circuits.
- Do not use your Qi Wireless Wake if it gets wet. Wait until it dries.
- If the Qi Wireless Wake is damaged in any way, do not use it.
- Keep it free from dust —dust can damage pas and electronic components.
- Do not store in cold temperatures as moisture can form inside the charger when it warms up to room temperature/charge.
- Do not modify the Qi Wireless Wake in any way.
- Never drop, knock or shake the Qi Wireless Wake. This could break internal circuit boards and mechanics.
- Always clean your Qi Wireless Wake with a so, clean dry cloth.
For questions or concerns, email us at info@atomiusa.com Manufactured and marketed by Atomi Inc. 10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi Inc. Designed by atomi in New York. Made in China One-year limited warranty from the date of purchase against defects in material and workmanship.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>