atomi Qi Wireless Car Charger 10W Fast Charger with Mount User Manual
- June 3, 2024
- atomi
Table of Contents
atomi Qi Wireless Car Charger 10W Fast Charger with Mount
Thank you for purchasing the atomi Qi Wireless Car Charger
The atomi Qi Wireless Car Charger combines a strong, automatic, motorized
mount with the freedom of wireless charging. Through Qi Wireless fast charging
technology, you can charge your phone quicker and more ffciently in your car.
The secure, motorized clamps provide the peffect viewing angle and the option
to turn your phone fromlandscape to poffrait mode seamlessly.
What’s Inside
- Qi Wireless Phone Mount
- 3 Mouting adaptors: Vent, Windshield, and Dash
- Qualcomm 3.0 USB Car Charger
- 3-Foot Type-C Cable
Specifications
Qi Charger Specifications: Input: 5V 2A, 9V 1.67A Output: 10W Car Charger Specifications: Input: DC 12-24V 1.6A max Output: 5V 3A, 9V 2A, 12V 1.5A
Charging Your Wireless Device
-
Connect the supplied Type-C cable to the wireless charger’s USB-C po and to the car charger’s USB po.Inse_ the car charger into your vehicle’s 12-volt power outlet.
-
Press the button on the side of the charger to open the clamps. Place your phone on the charger. The clamps will automatically close and hold your phone. Charge will start on contact.
NOTE: if the Type-C cable is not connected to the charger, the clamps will not close automatically. You will need to press the lateral button to close them to hold your phone. When the power is ott, it will beep to remind you to take away the phone.
Using the Vent Mount
Place the mount onto your vehicle’s vent louvers to attach.
Place the adaptor onto the vent mount.
Attach the charger’s mount onto the vent mount and turn the adaptor to tighten and secure it.
Using the Windshield Mount
Attach the mount onto your vehicle’s windshield.
Place the adaptor onto the windshield mount.
ttach the charger’s mount onto the windshield mount and turn the adaptor to tighten and secure it
Using the Dash Mount
Peel ott the paper on the back of the dash mount then place the mount onto your vehicle’s dash.
Place the adaptor onto the dash mount.
Attach the charger’s mount onto the dash mount and turn the adaptor to tighten and secure it.
Safety Information
Taking care of your Qi Wireless Car Charger will protect your warranty coverage. Here is how to properly care for your atomi Qi Wireless Car Charger
- Keep it dry, as any moisture, including humidity can corrode the electronic circuits. Do not use your Qi Wireless Car Charger if it gets wet. Wait until it dries.
- If the Qi Wireless Car Charger is damaged in anyway, do not use it.
- Keep it free from dust, as dust can damage parts and electronic components.
- Do not store in high temperatures, as high temperatures may damage the device.
- Do not store in cold temperatures, as moisture can form inside the charger when it warms up to room temperature.
- Do not modify the Qi Wireless Car Charger in any way.
- Never drop, knock or shake the Qi Wireless Car Charger. This could break internal circuit boards and mechanics.
- During extended operation, the device may feel warm. In most cases, this is normal. If the device is not working properly, contact us at info@atomiusa.com for warranty and product assistance.
Caution
If you have an implanted medical device, including pacemaker, implanted cardioveter defibrillator, etc., you should:
- Keep the Qi Wireless Car Charger more than six inches away from the medical device.
- Unplug the Qi Wireless Car Charger if you think it is intetering with your medical device.
- Follow the directions that came with your medical device.
Warning
This product can expose you to chemicals including Lead, which is known to the State of California to cause bith defects or other reproductive harm. For more information,go to www.P65Warnings.ca.gov.
For questions or concerns, email us at info@atomiusa.com Manufactured and
marketed by Atomi Inc.
10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi Inc.
Designed by atomi in New York. Made in China One-year limited warranty from
the date of purchase against defects in material and workmanship
WE APPRECIATE FEEDBACK! Please allow our customer service team to help with any issues before you leave a review.
/atomismartinc /atomisma @atomi.smart