ECLER VEO-XPT44 4K HDBaseT Extender User Manual

ECLER VEO-XPT44 4K HDBaseT Extender

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING
If applicable The terminals marked with symbol of  may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by an instructed person or the use of ready-made leads or cords. To prevent fire or shock hazard, do not expose this equipment to rain or moisture. An apparatus with Class I construction shall be connected to a mains socket-outlet with a protective earthing connection.

IMPORTANT SAFETY INSTRUCTIONS

• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus including amplifiers that produce heat.
• Do not defeat the safety purpose of the polarized or grounding type plug.
• A polarized plug has two blades with one wider than the other.
• A grounding type plug has two blades and a third grounding prong.
• The wide blade or the third prong are provided for your safety.
• If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug the apparatus during lightening sorts or when unused for long periods of time.
• Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Disconnecting from mains Switching off the POWER switch all the functions and light indicators of the amplifier will be stopped, but fully disconnecting the device from mains is done unplugging the power cord from the mains input socket. For this reason, it always shall remain readily operable.
• Equipment is connected to a socket-outlet with earthing connection by means of a power cord.
• The marking information is located at the bottom of apparatus.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.

NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING
This product must not be discarded, under any circumstance, as unsorted urban waste. Take to the nearest electrical and electronic waste treatment centre.

IMPORTANT NOTE
Thank you for choosing our VEO-XPT44 4K HDBaseT extender. It is very important to carefully read this manual and to fully understand its contents before making any connection in order to maximize your use and get the best performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its maintenance be carried out by our authorised Technical Services.
The VEO-XPT44 comes with a 3 year warranty.

INTRODUCTION

Ecler VEO-XPT44 is a professional HDBaseT transmitter/receiver kit for HDMI 2.0a extension of High Dynamic Range (HDR) formats. It supports video signal at resolution up to 4K/UHD at 60Hz with 4:4:4 chroma sampling and any other HDMI data rate up to 18Gbps. The VEO-XPT44 supports bidirectional PoH (Power Over HDBaseT) that allows to use only one power supply connected to the Transmitter or the Receiver, according to the installation needs. The extender kit includes bi-directional IR and RS-232 pass-through. It represents the ideal solution for residential and commercial applications that include the latest 4K/UHD and HDR sources and displays.

Features

• Complete extender kit, no configuration needed
• Bandwidth up to 18Gbps, resolution up to 4K 60hz YUV 4:4:4
• Supports HDR10 and 3D
• Transmission distance up to 70 meters with 1080p and 40 meters with 4K
• Bi directional IR and RS-232 pass through
• Bi directional POH RX powered by TX or TX powered by RX.
• 1x looping HDMI out on Transmitter and 2x HDMI out on Receiver for daisy-chaining or local monitoring purposes.
• Single UTP/STP category cable CAT-5E/6/7 to substitute HDMI cable to achieve long distance transmission.
• HDCP 2.2/1.4 compliant.
• ESD protection.

PACKAGE CONTENTS

• 1 x Transmitter Unit
• 1 x Receiver Unit
• 1 x 24V DC International Power Supply One PSU for both units
• 1 x IR Blaster unit
• 1 x IR Receiver unit
• 2 x Phoenix plugs for RS-232 cable termination

PANEL DESCRIPTION

Transmitter Front and Rear Panel

1. HDMI Input Port
2. HDMI Looping Output Port
3. IR Receiver Port
4. IR Transmitter Port
5. 24V DC Plug Connector
6. USB port (Reserved for firmware update)
7. CAT5e/6/7 Output
8. EDID Function Switch:
9. Auto: default 4K@60Hz
10. Local: copy EDID data from the display connected to the transmitter
11. Remote: copy EDID data from the display connected to the receiver
12. RS-232 Port

Receiver Front and Rear Panel

1. HDMI Out1 Port
2. HDMI Out2 Port
3. IR Transmitter Port
4. IR Receiver Port
5. 24V DC Plug Connector
6. USB port Reserved for firmware update
7. CAT5e/6/7 Input
8. RS-232 Port

CONNECTION AND INSTALLATION

1. Connect HDMI signal source (such as PC, Blu-ray player, etc) to HDMI input of VEO-XPT44.
2. Connect CAT5e/6/7 cable from RJ45 output of TX to RJ45 input of RX.
3. Connect HDMI display device such as 4K or Full HD display to HDMI output of VEO-XPT44
4. Connect IR Blaster cable into IR-Out port of the Transmitter; Connect IR Receiver cable into IR In port of the Receiver.

Phoenix RS-232 ports can be connected to DTE-DCE devices for pass-through RS-232 transmission. Connect 24V DC power supply to VEO-XPT44 Transmitter.

APPLICATION DIAGRAM

TECHNICAL SPECIFICATIONS

Supported Resolutions
4096×2160,24/25/30/50/60Hz,3840×2160 24/25/30/50/60Hz UHD,2048×1080,1080p,23.98/24/25/29.97/30/50/59.94/60Hz,1080i50/59.94/60Hz,720p50/59.94/60Hz,576p, 576i, 480p, 480i

VESA
2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800, 1280×768, 1152×864, 1024×768, 800×600, 640×480

Colorspace
YCbCr, RGB

Chroma Subsampling
4:4:4, 4:2:2, 4:2:0

Color depth
8 bit, 10 bit, 12-bit, 16-bit only 4K30

HDR
HDR10

Signal Bandwidth
18 Gbps

HDCP
2.2 Compliant

Audio Formats
PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio

Sample Rate
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

Bitrate
up to 24 bit

Distance

• Cat5e/6  4K  up to 35 meters / up to 115 feet
• Cat6a/7  4K up to 40 meters / up to 130 feet
• Cat5e/6  1080p up to 60 meters / up to 197 feet
• CAT6a/7 1080p up to 70 meters / up to 230 feet

HDMI Distance
Up to 10 meters / 33 ft with Ecler VEO cables

Operating Temperature
-10 to +50°C 14 to +122 °F

Humidity
5 to 90 % RH (no condensation)

Power Consumption
12W Max TX+RX

Power Supply
AC100~240V 50/60Hz Output: DC 24VDC 1A

Dimensions H x W x D
140mm × 67mm × 20mm 5.51 x 2.64 x 0.79

Weight
700g 1.54lbs Pair

All  product characteristicsare subject to  variation   due  to  production tolerances.

NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. Motors, 166‐168 08038 Barcelona  Spain ‐ (+34) 932238403 information@ecler.com www.ecler.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>