LASER SPK-BTLPP Portable Wireless Pill Speaker User Manual

User Manual

Portable Wireless Pill Speaker
SPK-BTLPP

WHAT’S IN THE BOX:

• 1 x SPK-BTLPP Speaker
• 1 x Micro USB Charge Cable
• 1 x 3.5mm AUX cable
• 1 x User Manual

SPECIFICATIONS:

FEATURES:

• Bluetooth Wireless Connectivity
• USB – Upto 32gb using FAT32 or exFAT file system only.
• Micro SD Card – Up to 32gb using FAT32 or exFAT file system only.
• FM Radio
• 3.5mm AUX-IN
• Rechargeable Battery
• Splashproof (IPX4)
• TWS (True Wireless Stereo)

CONTROLS:

DC 5V| • Insert one end of the Micro USB cable into the DC 5V port and the other end into a USB wall adapter (not included) to start charging.
• Approx. 3 – 4 hours for a full charge.
• When the speaker is not plugged into a charger, the Micro USB cable inserted into the DC 5V port is also used to improve the FM Radio reception.
---|---
Micro SD Card| • Only MP3 files on FAT32 or exFAT filesystem are supported.
• Please try formatting storage to the suggested file system if not detected.
USB| • Only MP3 files on FAT32 or exFAT file system are supported.
• Please try formatting storage to suggested file system if not detected.
AUX Input| • Connect a source device via the supplied 3.5mm AUX cable for music playback.
– Button| • Hold to decrease volume.
• Tap to SKIP backward between stations or tracks.
+ Button| • Hold to increase volume.
• Tap to SKIP forwards between stations or tracks.
**Play / Pause Button| • Tap to PLAY/PAUSE track.
• Tap to start AUTO SEARCH of stations when using the FM Radio function.
Power / M Button**| • Press and hold to turn the device ON/OFF.
• Tap to change between Bluetooth, AUX, FM, Micro SD or USB modes.

BLUETOOTH PAIRING:

1. With the speaker on tap the MODE button until you reach Bluetooth mode.
2. Search for “SPK-BTLPP” under the Bluetooth settings of the device you are connecting to e.g. smartphone or tablet.

TIP: If a password is requested enter “0000”

FM RADIO:

1. With the speaker on tap the MODE button until you reach FM Radio mode
2. Tap the PLAY/PAUSE button to start the AUTO SEARCH function for FM stations.
3. This operation will scan all available FM stations and record them to memory.
4. The scan procedure will take 1 -2 minutes to complete and should not beinterrupted.
5. Once complete you can tap the + or – buttons to skip between the saved stations.

TIP: When the speaker is not plugged into a charger, the Micro USB cable inserted into the 5V port is also used to improve the FM Radio reception.

TRUE WIRELESS STEREO – TWS (2 SPEAKERS REQUIRED):

• Make sure neither of the speakers are paired to any Bluetooth device. If they are they will need to be unpaired first.
• Turn ON both speakers and switch them into Bluetooth mode.
• Press and hold the PLAY/PAUSE on one of the speakers for approx 2 – 3 seconds
• A sound will be heard which indicates the speakers are now connected for TWS.
• You can now connect one of the speakers to a Bluetooth source device and when music/sound is played it will come through on both speakers.

TIP: To disconnect TWS, simply turn off one of the speakers or move it out of Bluetooth range (10 meters)

TROUBLESHOOTING:

No Power:

• Check battery level and charge if required.
• Try turning on speaker while connected to a power source.
• Try charging the speaker with USB Wall Adapter(like a smartphone charger) instead of a laptop/computer.

Radio not clear:

• Change speaker location.
• When the speaker is not plugged into a charger, the Micro USB cable inserted into the DC 5V port is also used to improve the FM Radio reception.as an aerial.
• Isolate speaker from other devices as unclear reception may be caused by interference.

USB or Micro SD Card not recognized or files not playing:

• Make sure the USB or Micro SD Card is 32gb or less.
• Check the USB or Micro SD Card has been formatted to the FAT32 or exFAT file system. If the USB/Micro SD Card is new out of the box, we recommend you format it on windows-based computer first before copying music to it, then using with the speaker.
• Make sure to only use MP3 music files copied to the USB or Micro SD Card.

WARRANTY AGAINST DEFECTS

Laser warrants your new product to be free from defects in materials and workmanship for 12 months, from the date of purchase, provided that the product is used in  accordance with accompanying recommendations or instructions where provided. The benefit of this warranty is in addition to your rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a refund, repair, or exchange (where possible) for this product if it becomes defective within the warranty period. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear and tear, neglect, or improper storage. Please retain your receipt as proof of purchase

How to make a product warranty claim:

1. Find your receipt with date of purchase. If this is not available, Laser will make an assessment
   based on the date of manufacture, condition of the product, and type of defect.

2. Please contact your original place of purchase. They will assess the nature of the fault and refund or replace the product as per their store refund or warranty policy.

3. If your original place of purchase cannot be contacted, please contact Laser with a description of the fault. To assist our team in providing you with a quick resolution, please include any photos and/or a short video demonstrating the fault with your product.
   • Phone: (02) 9870 3355
   • Email: support@laserco.com.au
   • Online: www.laserco.net/support/warranty and follow the website instructions
   • Business Address: U1 6-8 Byfield Street, Macquarie Park, 2113, NSW, Australia

4. The laser will review your claim and in the first instance, attempt to troubleshoot and resolve the issue for you without the need to return the product.

5. If it is determined via troubleshooting that your product may be faulty, our team will provide instructions to have the product returned for assessment. If the product does need to be returned within the warranty period, Laser will arrange return shipping at no cost to you.

6. Once we receive the product, our experienced technicians will assess it and determine how best to resolve the issue.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

For more helpful guides visit us at

LASER
www.youtube.com/LasercoAu
www.laserco.com.auhttps://www.youtube.com/channel/UCQOuBKnSya0x9zCjPfYzklg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>