FOCAL K2 POWER M Speaker User Manual
- June 12, 2024
- FOCAL
Table of Contents
FOCAL K2 POWER M Speaker
Product Information
The K2 POWER M is a high-performance car audio amplifier designed by Focal. It is equipped with advanced features to deliver powerful and clear sound in your vehicle. The amplifier is built with top-quality components and offers exceptional reliability and durability.
Product Usage Instructions
- Before connecting the amplifier, ensure that your vehicle’s electrical system can handle the power requirements. Consult your vehicle’s manual or a professional installer if needed.
- Locate a suitable mounting location for the amplifier. It should be placed in a well-ventilated area away from direct sunlight and moisture.
- Connect the power wires to the amplifier. Use appropriate gauge wires that can handle the power output of the amplifier. Connect the positive wire to the positive terminal of the vehicle’s battery and the negative wire to a solid ground point.
- Connect the audio source to the amplifier. Use high-quality RCA cables to connect the amplifier’s input to the audio source, such as a head unit or a signal processor.
- Connect the speakers to the amplifier. Use speaker wires to connect the amplifier’s outputs to the speakers. Ensure proper polarity matching for each speaker connection.
- Adjust the amplifier’s settings according to your preferences. Use the provided user manual for detailed instructions on adjusting gain, crossover, and other settings.
- Test the system by playing audio through the amplifier. Gradually increase the volume and ensure that all speakers are working correctly without distortion or clipping.
- If necessary, fine-tune the settings for optimal sound quality and performance.
- Regularly check the amplifier’s connections and ensure that they are secure. Clean any dust or debris that may accumulate on the amplifier’s surface to maintain proper cooling.
For more detailed information and instructions, refer to the user manual provided by Focal.
WHATS IN THE BOX
TOOLS
INSTALLATION INSTRUCTION
Active filter setup suggested frequency range
Configuration filtre actif, reponses en frequence suggerees
| 2-way| 3-way
SUB 5 KM| 30Hz/70-100Hz| 30Hz/70-100Hz
6.5 KM| S0Hz/2.SkHz| 50Hz/400Hz
3KM| | 400Hz/4kHz
FRANK| l.5-3Hz/30kHz| 4kHz/30kHz
Active filter setup suggested frequency range
Configuration filtre actif, reponses en frequence suggerees
| Center channel| Surround
SUB 5 KM| |
6.5 KM| |
3KM| 300Hz/13kHz| 300Hz/14kHz
FRAK| | 600Hz/30kHz
| Volume(L) | Frequency/Frequency F-3 (Hz) |
|---|---|
| 4 | 41 |
| 6 | 39 |
Product sheet
Power and compactness are the watchwords of the new K2 Power M line. Our engineers have packed the best Focal technologies, around our iconic K2 cone made with aramid fibre, renowned for its exceptional dynamics and high performance. Available “à la carte”, the K2 Power M products enable you to create the active audio system of your choice for a bespoke installation.
Key points
- Exclusive ‘M’-profile K2 cone
- Compact speaker driver
- Exceptional power handling
- Active product
- Aluminum grille (optional)
- Type Medium
- Medium 3″ (80mm)
- Depth 11/8″(27.3mm)
- Cone K2 Sandwich, M-shaped
- Maximum power 120W
- Nominal power 60W RMS
- Sensitivity (2.83V/1m) 89dB
- Frequency response 200Hz – 9kHz
- Impedance 4 Ώ
- Magnet Neodymium
- Voice-coil diameter 13/8″ (35mm)
- Suspension TMD®
Technical Sheet
SPECIFICATIONS
- Nominal power 60W
- Maximum power 120W
- Sensitivity 89dB
- Nom. impedanc e 4Ω
- Frequency response 200Hz-9KHz
- Cone Kevlar Sandwich, M
- Surround TMD®
- VC diameter 35mm 1 3/8″
- Net weight 200g
FREQUENCY RESPONSE/IMPEDANCE
PARAMETERS
- Rdc 3Ω
- Fs 170Hz
- Mms 3.4g
- Cms 0.4mm/N
- Vas 0.3l
- Qts 0.65
- Qes 0.717
- Qms 7
- Bxl 4N/A
- Sd 30cm²
MECHANICAL DRAWING
Midrange
- Reference 3 KM
- Cone K2 Sandwich, M-shaped
- Midrange 3″ 80mm
- Max. power 120W
- Norn. power 60W RMS
- Sensitivity 89dB
- Impedance 40
- Frequency response 200Hz-9000Hz
- Voice-coil diameter l3/8″ 35mm
- Depth 111s11 27.3mm
- Magnet Neodymium
- Suspension TMD®
- Focal-JMlab – BP 374 – 108, rue de l’Avenlr 42353 La Talaudlere cedex – France Made in France – 2022 – All rights reserved. SCCG – 20/07/2022 – vl – EMCA2277
- Focal® is a trademark of Focal-JMLab® – www.focal.com – SCTL – 26/10/2022 – v1
References
- USA | Focal
- Top-of-the-range speakers and hi-fi equipment | Focal
- Top-of-the-range speakers and hi-fi equipment | Focal
- Top-of-the-range speakers and hi-fi equipment | Focal
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>