Hatco TK-100-240 Toast King® Electric Conveyor Toasters User Manual

June 3, 2024
Hatco

Hatco-TK-100-240-Toast-King®-Electric-Conveyor-Toasters-
LOGO

Hatco TK-100-240 Toast King® Electric Conveyor Toasters

IMPORTANT OWNER INFORMATION

Record the model number, serial number, voltage, and purchase date of the unit in the spaces below (specification label located on the back of the unit). Please have this information available when calling Hatco for service assistance.
Model No. ____
Serial No. ____
Voltage __
Date of Purchase __

Register your unit!
Completing online warranty registration will prevent delay in obtaining warranty coverage. Access the Hatco website at www.hatcocorp.com, select the Parts & Service pull-down menu, and click on “Warranty Registration”.

Business
Hours: 7:00 am to 5:00 Pm Central Standard Time (CST)
(Summer Hours: June to September—
7:00 am to 5:00 Pm CST monday–Thursday
7:00 am to 4:00 Pm CST Friday)
Telephone: 800-558-0607; 414-671-6350
e-mail: partsandservice@hatcocorp.com

24 Hour 7 Day Parts and Service
Assistance available in the United States
and Canada by calling 800-558-0607.
additional information can be found by visiting our web site at www.hatcocorp.com.

INTRODUCTION

Hatco Toast King Electric Conveyor Toasters are specially designed to speed the toasting operation. Products pass through a heating chamber for rapid and thorough toasting. Dryness, moisture, sugar content, and thickness of bread product affect the ability to achieve the perfect toasted product. Conveyor speed, not temperature, determines the toasting color.
Hatco toasters are quality built to meet the demands of foodservice operations and provide years of trouble-free performance. The metal-sheathed tubular heating elements are guaranteed against breakage and burnout for two years. (If failure of one element should occur, your Hatco toaster will continue to operate – the production may be slightly lower.)
Hatco Electric Conveyor Toasters are products of extensive research and field testing. The materials used were selected for maximum durability, attractive appearance, and optimum performance. Every unit is inspected and tested thoroughly prior to shipment.
This manual provides the installation, safety, and operating instructions for Hatco Electric Conveyor Toasters. Hatco recommends all installation, operating, and safety instructions appearing in this manual be read prior to installation or operation of a unit.
Safety information that appears in this manual is identified by the following signal word panels:

WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE
NOTICE is used to address practices not related to personal injury.

****Read the following important safety information before using this equipment to avoid serious injury or death and to avoid damage to equipment or property.

WARNING
ELECTRIC SHOCK HAZARD:

  • Plug unit into a properly grounded electrical receptacle of correct voltage, size, and plug configuration. If plug and receptacle do not match, contact a qualified electrician to determine and install proper voltage and size electrical receptacle.
  • Turn OFF power switch, unplug power cord/turn off power at circuit breaker, and allow unit to cool before performing any cleaning, adjustments, or maintenance.
  • DO NOT submerge or saturate with water. Unit is not waterproof. Do not operate if unit has been submerged or saturated with water.
  • Unit is not weatherproof. Locate unit indoors where the ambient air temperature is a minimum of 70°F (21°C).
  • Do not pull unit by power cord.
  • Discontinue use if power cord is frayed or worn.
  • Do not attempt to repair or replace a damaged power cord. Cord must be replaced by Hatco, an Authorized Hatco Service Agent, or a person with similar qualifications.
  • Do not steam clean or use excessive water on unit.
  • This unit is not “jet-proof” construction. Do not use jet-clean spray to clean unit.
  • Do not clean unit when it is energized or hot.
  • Do not allow liquids to spill into unit.
  • This unit must be serviced by qualified personnel only. Service by unqualified personnel may lead to electric shock or burn.

FIRE HAZARD:

  • Locate unit a minimum of 1″ (25 mm) from combustible walls and materials. If safe distances are not maintained, combustion or discoloration could occur.
  • Do not locate toaster under shelving or closer than 12″ (305 mm) from the ceiling.
  • Do not place anything on top of toaster. Do not place toaster near or underneath curtains or other combustible materials. Items near or on top of toaster could catch fire causing injury and/or damage to toaster.

EXPLOSION HAZARD: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
In case of fire, disconnect toaster from power source immediately. This allows unit to cool, making it easier and safer to put out the fire.
Make sure all operators have been instructed on the safe and proper use of the unit.
This unit is not intended for use by children or persons with reduced physical, sensory, or mental capabilities. Ensure proper supervision of children and keep them away from unit.

WARNING
This unit has no “user-serviceable” parts. If service is required on this unit, contact an Authorized Hatco Service Agent or contact the Hatco Service Department at 800-558-0607 or 414-671-6350.

CAUTION
BURN HAZARD:

  • Some exterior surfaces on unit will get hot. Use caution when touching these areas.
  • Do not remove toast collector pan or baskets for cleaning until toaster is cool.

Locate unit at proper counter height in an area that is convenient for use. Location should be level to prevent unit or its contents from falling accidentally and strong enough to support weight of unit and contents.
Products thicker than 1-1/4″ (32 mm) will cause conveyor system to jam, which could ignite product inside toaster.
Misalignment of toasting baskets will cause conveyor to jam. Hold down bars should be facing out and lying flat on baskets. Incorrectly positioned bars will cause conveyor to stop.
Always operate toaster with toast collector pan installed.
Toasting of coated or buttered products such as garlic bread, cheese sandwiches, and sweet rolls is NOT recommended. Residue will reduce toaster performance and could ignite inside toaster. Using toaster with food products listed above will void unit warranty.

NOTICE
Do not locate unit in an area subject to excessive temperatures or grease from grills, fryers, etc. Excessive temperatures could cause damage to the unit.
Do not locate toaster in an area that restricts air flow around front or rear of unit.
Do not locate unit in area with excessive air movement around unit. Avoid areas that may be subject to active air movements or currents (i.e., near exhaust fans/hoods, air conditioning ducts, and exterior doors).
Do not lay unit on the side with control panel or manual advance knob. Damage to unit could occur.
Use non-abrasive cleaners and cloths only. Abrasive cleaners and cloths could scratch finish of unit, marring its appearance and making it susceptible to soil accumulation.
This unit is intended for commercial use only—NOT for household use.

MODEL DESCRIPTION

All Models
Toast King® Electric Conveyor Toasters are fast, dependable, and versatile. They are designed for constant, high volume applications featuring three- basket access for fast loading to toast between 720–1500 slices of bread per hour, depending on the model. Multiple, fast heat-up heating elements ensure continuous toasting.
Every unit includes a toast collector pan, heated toast storage area, power saving thermostat, speed control, manual advance, and factory attached 4′ (1219 mm) cord and plug.

TK-72 Model
The TK-72 model toasts up to 12 bread or bun slices per minute (720 per hour) and features toasting baskets two-slices wide.

TK-100 Model
The TK-100 model toasts up to 16 bread or bun slices per minute (960 per hour) and features toasting baskets three-slices wide.

TK-135B Model
The TK-135B model is a buns only toaster that toasts up to 22 bun slices per minute (1320 per hour) and features toasting baskets three-slices wide.

TK-155B Model
The TK-155B model is a 3-part hamburger bun toaster that toasts up to 25 3-part bun slices per minute (1500 per hour) and features toasting baskets three-slices wide. The outside buns are toasted on one side, the middle bun is toasted on both sides.Hatco-TK-100-240-Toast-King®-Electric-Conveyor-
Toasters-02

MODEL DESIGNATION

Hatco-TK-100-240-Toast-King®-Electric-Conveyor-
Toasters-03

Plug Configurations
Units are supplied from the factory with an electrical cord and plug installed. Plugs are supplied according to the applications.

WARNING
ELECTRIC SHOCK HA

ZARD:
Plug unit into a properly grounded electrical receptacle of correct voltage, size, and plug configuration. If plug and receptacle do not match, contact a qualified electrician to determine and install proper voltage and size electrical receptacle.
NOTE: Specification label located on the back of the unit. See label for serial number and verification of unit electrical information.Hatco-
TK-100-240-Toast-King®-Electric-Conveyor-Toasters-04

NOTE: Receptacles are not supplied by Hatco, but some are available as accessories.

Connecting Supply Wires
If local codes require Greenfield or conduit hook-up, consult a licensed electrical contractor to perform supply wire connection. Access to the unit wiring is through the rear lower access panel.

To connect supply wires to the toaster:

  1. Remove the screws securing the side panels, and remove the side panels.
  2. Remove the screws securing the rear lower access panel, and remove the panel.
  3. Insert the Greenfield or conduit through the opening in the rear access panel and attach to the power supply bracket. Connect the wires.
  4. Attach the ground wire to the power supply bracket at the threaded hole marked “G”.
  5. Reinstall access panel and side panels.

SPECIFICATIONS

Electrical Rating Chart

Model| Voltage| Hertz| Watts| Amps| Plug Configuration| Shipping Weight
---|---|---|---|---|---|---
TK-72| 208| 60| 4038| 19.4| NEma 6-20P| 73 lbs. (33 kg)
| 240| 60| 4038| 16.8| NEma 6-20P
| 73 lbs. (33 kg)
| 200
220
220
220–230
230–240
240| CE
CE| 50
50
60
50
50
50| 3733
4038
4038
4038–4414
3708–4038
4038| 18.7
18.4
18.4
18.4–19.2
16.1–16.8
16.8| NEma 6-20P
No Cap No Cap No Cap No Cap No Cap| 73
73
73
73
73
73| lbs. lbs. lbs. lbs. lbs.
lbs.| (33

(33

(33

(33
(33
(33

| kg)

kg)

kg)

kg)

kg)

kg)

|
TK-75| 220–230
230–240| CE
CE| 50
50| 5238–5725
4811–5238| 23.8–24.9
21.0–21.8| No Cap
No Cap| 73
73| lbs.
lbs.| (33
(33| kg)
kg)|
TK-100| 208| 60| 5038| 24.0| NEma 6-30P| 88 lbs. (40 kg)
---|---|---|---|---|---|---
| 240| 60| 5038| 21.0| NEma 6-30P| 88 lbs. (40 kg)
| 200| 50| 4657| 23.3| NEma 6-30P| 88| lbs.| (40| kg)
---|---|---|---|---|---|---|---|---|---
220| 60| 5038| 22.9| No Cap| 88| lbs.| (40| kg)
220| 50| 5038| 22.9| No Cap| 88| lbs.| (40| kg)
220–230 CE| 50| 5038–5507| 22.9–23.9| No Cap| 88| lbs.| (40| kg)
230–240 CE| 50| 4626–5038| 20.1–21.0| No Cap| 88| lbs.| (40| kg)
240| 50| 5038| 21.0| No Cap| 88| lbs.| (40| kg)
TK-105| 220| 50| 7438| 33.8| No Cord| 88| lbs.| (40| kg)
| 240| 50| 5678| 23.7| No Cap| 88| lbs.| (40| kg)
| 220–230 CE| 50| 7438–8129| 33.8–35.3| No Cord| 88| lbs.| (40| kg)
| 230–240 CE| 50| 6830–7438| 30.0–31.0| No Cord| 88| lbs.| (40| kg)
TK-135B| 208| 60| 4338| 20.9| NEma 6-30P| 88 lbs. (40 kg)
---|---|---|---|---|---|---
| 240| 60| 4338| 18.1| NEma 6-20P*| 88 lbs. (40 kg)
| 220| 60| 4338| 19.7| No Cap| 88 lbs. (40 kg)
| 220| 50| 4338| 19.7| No Cap| 88 lbs. (40 kg)
| 220–230 CE| 50| 4338–4741| 19.7–20.6| No Cap| 88 lbs. (40 kg)
| 230–240 CE| 50| 3984–4338| 17.3–18.1| No Cap| 88 lbs. (40 kg)
| 240| 50| 4338| 18.1| No Cap| 88 lbs. (40 kg)
TK-155B| 208| 60| 5018| 24.1| NEma 6-30P| 88 lbs. (40 kg)
| 240| 60| 5018| 20.9| NEma 6-30P| 88 lbs. (40 kg)
| 220| 60| 5018| 22.8| No Cap| 88 lbs. (40 kg)
| 220| 50| 5018| 22.8| No Cap| 88 lbs. (40 kg)
| 240| 50| 5018| 20.9| No Cap| 88 lbs. (40 kg)

The shaded areas contain electrical information for International models only.

  • NEMA 6-30P for Canada.
    NOTE: Units with “No Cap” plug configuration come with a power cord only (no plug).
Dimensions

Model

| Width (A)| Depth (B)| Height **(C)*| Footprint Width (D)| Footprint Depth (E)**
---|---|---|---|---|---
TK-72| 18-1/4″ (464 mm)| 17-5/8″ (448 mm)| 33-1/4″ (844 mm)| 13-3/4″ (349 mm)| 11-1/4″ (287 mm)
TK-75| 18-1/4″ (464 mm)| 17-5/8″ (448 mm)| 33-1/4″ (844 mm)| 13-3/4″ (349 mm)| 11-1/4″ (287 mm)
TK-100| 22-3/4″ (578 mm)| 17-5/8″ (448 mm)| 33-1/4″ (844 mm)| 18-1/4″ (464 mm)| 11-1/4″ (287 mm)
TK-105| 22-3/4″ (578 mm)| 17-5/8″ (448 mm)| 33-1/4″ (844 mm)| 18-1/4″ (464 mm)| 11-1/4″ (287 mm)
TK-135B| 22-3/4″ (578 mm)| 17-5/8″ (448 mm)| 33-1/4″ (844 mm)| 18-1/4″ (464 mm)| 11-1/4″ (287 mm)
TK-155B| 22-3/4″ (578 mm)| 17-5/8″ (448 mm)| 33-1/4″ (844 mm)| 18-1/4″ (464 mm)| 11-1/4″ (287 mm)

  • Add 4′′ (102 mm) to the height of the unit if the 4′′ (102 mm) leg accessory is installed.Hatco-TK-100-240-Toast-King®-Electric-Conveyor-Toasters-05

INSTALLATION

GenGeneral
Hatco Toast King® Electric Conveyor Toasters are shipped with all components pre-assembled. Care should be taken when unpacking the shipping carton to avoid damage to the unit and the components enclosed. eral
Hatco Toast King® Electric Conveyor Toasters are shipped with all components pre-assembled. Care should be taken when unpacking the shipping carton to avoid damage to the unit and the components enclosed.

WARNING
ELECTRIC SHOCK HAZARD: Unit is not weatherproof. Locate unit indoors where ambient air temperature is a minimum of 70°F (21°C).
EXPLOSION HAZARD: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

FIRE HAZARD:

  • Locate unit a minimum of 1″ (25 mm) from combustible walls and materials. If safe distances are not maintained, combustion or discoloration could occur.
  • Do not place anything on top of toaster. Do not place toaster near or underneath curtains or other combustible materials. Items near or on top of toaster could catch fire causing injury and/or damage to toaster.
  1. Remove the unit from the carton.
    NOTE: To prevent delay in obtaining warranty coverage, complete online warranty registration. See the IMPORTANT OWNER INFORMATION section for details.

  2. Remove tape and protective packaging from all surfaces of the unit.

  3. Place the unit in the desired location. This may require two people.

    • Locate the unit in an area where the ambient air temperature is constant and a minimum of 70°F (21°C). Avoid areas that may be subject to active air movements or currents (i.e., near exhaust fans/hoods, air conditioning ducts, exterior doors).
    • Make sure the unit is at the proper counter height in an area convenient for use.
    • Make sure the countertop is level and strong enough to support the weight of the unit and food product.
    • Make sure all the feet on the bottom of the unit are positioned securely on the countertop.
      NOTICE
      Do not locate unit in an area subject to excessive temperatures or grease from grills, fryers, etc. Excessive temperatures could cause damage to the unit.
      Do not locate toaster in an area that restricts air flow around front or rear of unit.
      Do not locate unit in area with excessive air movement around unit. Avoid areas that may be subject to active air movements or currents (i.e., near exhaust fans/hoods, air conditioning ducts, and exterior doors).
  4. Install the toast collector pan.

  5. If the unit does not have a plug installed on the power cord, contact a qualified electrician to determine and install the proper voltage and size electrical plug. See the SPECIFICATIONS section for details.

NOTE: Hatco tests each toaster with bread product prior to shipping.

General
Hatco Toasters are designed for ease of operation. Perform the following procedure to operate the toaster.

WARNING
Read all safety messages in the IMPORTANT SAFETY INFORMATION section before operating this equipment.

  1. Plug the unit into a properly grounded electrical receptacle of the correct voltage, size, and plug configuration. See the SPECIFICATIONS section for details.

  2. Turn the Selector Switch from the OFF (O) position to the TOAST or BUNS position.
    NOTE: When toasting buns or bagels, place cut side facing out and set the Selector Switch to the BUNS position.

  3. Turn the Speed Control counter-clockwise to the lightest/fastest position while the unit heats up.
    NOTE: Allow approximately 20–30 minutes for a warm-up period.
    CAUTION
    Always operate toaster with toast collector pan installed.
    BURN HAZARD: Some exterior surfaces on unit will get hot. Use caution when touching these areas.

  4. After warm-up period, set the Speed Control to the desired toast darkness setting. The “1” setting on the Speed Control knobs represents the lightest toast setting and the “7” setting represents the darkest.
    NOTE: To toast moist products such as English muffins, rye bread, or whole wheat, slow the conveyor by turning the Speed Control knob to a DARKER setting (clockwise).

CAUTION
Toasting of coated or buttered products such as garlic bread, cheese sandwiches, and sweet rolls is NOT recommended. Residue will reduce toaster performance and could ignite inside toaster. Using toaster with food products listed above will void unit warranty.
Products thicker than 1-1/4″ (32 mm) will cause conveyor system to jam, which could ignite product inside toaster.Hatco-TK-100-240-Toast-King®-Electric-
Conveyor-Toasters-07 Manual Advance
The manual advance knob is located on the right side panel of the toaster. This knob permits manual advancement of the toasting baskets and allows rapid discharge of toast.

Thermostat Adjustment
The thermostat adjustment screw is located on the control panel. The thermostat controls the toasting chamber temperature and is preset at the factory.

If adjustment is needed, use the following procedure.

  1. Turn the Selector Switch to the TOAST or BUNS position and allow approximately 20–30 minutes for a warm-up period.
    • The thermostat should be adjusted when the toaster is at the operation temperature.
  2. Turn the adjustment screw using a small screwdriver.
    • Turn the screw clockwise to increase temperature or counterclockwise to decrease the temperature.

NOTE: Do not turn the screw more than 1/8 turn at a time.
Allow at least five minutes for temperature to stabilize.

MAINTENANCE

General
Hatco Electric Conveyor Toasters are designed for maximum durability and performance, with minimum maintenance. NOTE: The conveyor chain gear motor is permanently lubricated and requires no maintenance.

WARNING
ELECTRIC SHOCK HAZARD:

  • Turn OFF power switch, unplug power cord/turn off power at circuit breaker, and allow unit to cool before performing any cleaning, adjustments, or maintenance.
  • DO NOT submerge or saturate with water. Unit is not waterproof. Do not operate if unit has been submerged or saturated with water.
  • Do not steam clean or use excessive water on unit.
  • This unit is not “jet-proof” construction. Do not use jet-clean spray to clean this unit.
  • Do not clean unit when it is energized or hot.

This unit has no “user-serviceable” parts. If service is required on this unit, contact an Authorized Hatco Service Agent or contact the Hatco Service Department at 800-558-0607 or 414-671-6350.

Daily Cleaning
To preserve the finish of the toaster, it is recommended that the metal surfaces be wiped daily with a non-abrasive, damp cloth.

WARNING
Submerging or saturating unit with water will damage the unit and void unit warranty.

CAUTION
Do not remove toast collector pan or baskets for cleaning until toaster is cool.

  1. Turn the Selector Switch to the OFF (O) position, unplug power cord/turn off power at circuit breaker, and allow the unit to cool.

  2. Remove and empty the toast collector pan.

  3. Wash the toast collector pan with warm water and a mild detergent. Rinse with water.

  4. Allow the toast collector pan to air dry before placing back into the toaster.

  5. Wipe the exterior surface of the toaster with a damp cloth.
    NOTICE: Use non-abrasive cleaners and cloths only.

  6. Wipe dry the entire unit using a dry, non-abrasive cloth.

Cleaning the Toasting Baskets
The toasting baskets need to be removed from the toaster periodically in order to be cleaned properly.

  1. Use the manual advance knob on the right side of the unit to advance the baskets without energizing the unit.
  2. Remove the baskets by pushing the spring-loaded chain away from the basket while pulling the basket away from the chain and outward.
    • The chain link pins must be pulled out of the toasting basket holes on the top of each side of the baskets.Hatco-TK-100-240-Toast-King®-Electric-Conveyor-Toasters-08 NOTE: Do not detach the hold down bars when cleaning toasting baskets.
  3. Wipe clean with a soft, damp cloth or soak the baskets in a mild solution of soap and water.
  4. Re-install a basket by aligning a pin on each chain with the holes in each side of the toasting basket. The pin on the right-hand chain must be exactly opposite the pin on the left-hand chain.
  5. To attach the remaining baskets, advance the conveyor and repeat the previous step. Each basket must be hung immediately below the preceding basket for all baskets to fit properly.

CAUTION
Misalignment of toasting baskets will cause conveyor to jam. Hold down bars should be facing out and lying flat on baskets. Incorrectly positioned bars will cause conveyor to stop.

TROUBLESHOOTING GUIDE

WARNING
This unit must be serviced by qualified personnel only. Service by unqualified personnel may lead to electric shock or burn.

WARNING
ELECTRIC SHOCK HAZARD: Turn OFF power switch, unplug power cord/turn off power at circuit breaker, and allow unit to cool before performing any cleaning, adjustments, or maintenance.

Symptom Probable Cause Corrective Action
Toast too light. Speed Control set on a light setting. Turn Speed Control to

a darker setting.
Thermostat is set to low.| Refer to  “Thermostat adjustment” Operation section for information.| in| the
Supply voltage to unit is low.| Verify the supply voltage to the toaster matches the unit specifications.
Heating element defective.| Contact authorized Service agent or Hatco for assistance.
Toast too dark.| Speed Control set on a dark setting.| Turn Speed Control to a lighter setting.
Thermostat is set to high.| Refer to  “Thermostat adjustment” Operation section for information.| in| the
Supply voltage to unit is high.| Verify the supply voltage to the toaster matches the unit specifications.
Unit takes too long to toast.| The first few batches can take longer because the toaster needs time to heat up when initially turned on.| Wait until the toaster is at full operation temperature before inserting bread.
Supply voltage to unit is low.| Verify the supply voltage to the toaster matches the unit specifications.
Unit toasts on one side only.
(TK-135B and TK-155B models are designed to toast one side of buns/bagels only.)| The selector switch is in the BUNS position.| move the selector switch to the BREaD position.
Heating element defective.| Contact authorized Service agent or Hatco for assistance.
Toaster trips the circuit breaker or GFCI.| Circuit breaker is not sized properly for the toaster.| Check circuit breaker for proper sizing.
Wiring fault inside toaster.| Contact authorized Service agent or Hatco for assistance.

Troubleshooting Questions?
If you continue to have problems resolving an issue, please contact the nearest Authorized Hatco Service Agency or Hatco for assistance. To locate the nearest Service Agency, log onto the Hatco website at www.hatcocorp.com and click on Find Service Agent, or contact the Hatco Parts and Service Team at:
Telephone: 800-558-0607 or 414-671-6350
e-mail: partsandservice@hatcocorp.com

OPTIONS AND ACCESSORIES

4″ (102 mm) Adjustable Legs
4” (102 mm) adjustable legs are available as accessories for all models. Use the following procedure to install the legs.

NOTICE
Do not lay unit on the side with control panel or manual advance knob. Damage to unit could occur.

  1. Carefully place unit on its side.
  2. Thread the 4″ (102 mm) adjustable legs into the existing leg holes on the bottom of the unit.
  3. After all legs are secure, return the unit to the upright position. This may require two people.
  4. Level the unit by turning the Shorten adjustable tip on each leg. Use a 5/8″ (16mm) open-end wrench to make leveling adjustments.Hatco-TK-100-240-Toast-King®-Electric-Conveyor-Toasters-09

Baskets for Jumbo Buns
Baskets for Jumbo Buns are available as accessories for TK-100, TK-135B, and TK-155B Models only. These baskets accommodate large buns up to 5-1/2″ (140 mm) in diameter.

Security Control Cover
An optional security control cover is available for all models (not for field retrofit). A security control cover includes the control cover, bracket, fuse cover, and mounting hardware.

Receptacles
Receptacles are available as accessories for units using NEMA 6-20P or NEMA 6-30P plugs.

Mounting Brackets
Mounting brackets are available as accessories to securely and permanently mount a toaster. The brackets are installed in the leg mounting holes. Fasteners not supplied.

LIMITED WARRANTY

  1. PRODUCT WARRANTY
    Hatco warrants the products that it manufactures (the “Products”) to be free from defects in materials and workmanship, under normal use and service, for a period of one (1) year from the date of purchase when installed and maintained in accordance with Hatco’s written instructions or 18 months from the date of shipment from Hatco. Buyer must establish the Product’s purchase date by registering the Product with Hatco or by other means satisfactory to Hatco in its sole discretion.
    Hatco warrants the following Product components to be free from defects in materials and workmanship from the date of purchase (subject to the foregoing conditions) for the period(s) of time and on the conditions listed below:

  2. One (1) Year Parts and Labor PLUS One (1) Additional Year Parts-Only Warranty:

  * Conveyor Toaster Elements (metal sheathed)
  * Drawer Warmer Elements (metal sheathed)
  * Drawer Warmer Drawer Rollers and Slides
  * Strip Heater Elements (metal sheathed)
  * Display Warmer Elements (metal sheathed air heating)
  * Holding Cabinet Elements (metal sheathed air heating)
  * Heated Well Elements — HW and HWB Series (metal sheathed)
2. One (1) Year Parts and Labor PLUS Four (4) Years Parts-Only Warranty: 3CS and FR Tanks
3. One (1) Year Parts and Labor PLUS Nine (9) Years Parts-Only Warranty on:  

Electric Booster Heater Tanks
Gas Booster Heater Tanks

4. Ninety (90) Day Parts-Only Warranty: Replacement Parts  

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT INFRINGEMENT. Without limiting the generality of the foregoing, SUCH WARRANTIES DO NOT COVER: Coated incandescent light bulbs, fluorescent lights, heat lamp bulbs, coated halogen light bulbs, halogen heat lamp bulbs, xenon light bulbs, LED light tubes, glass components, and fuses; Product failure in booster tank, fin tube heat exchanger, or other water heating equipment caused by liming, sediment buildup, chemical attack, or freezing; or Product misuse, tampering or misapplication, improper installation, or application of improper voltage.

  1. LIMITATION OF REMEDIES AND DAMAGES
    Hatco’s liability and Buyer’s exclusive remedy hereunder will be limited solely, at Hatco’s option, to repair or replacement using new or refurbished parts or Product by Hatco or a Hatco-authorized service agency (other than where Buyer is located outside of the United States, Canada, United Kingdom, or Australia, in which case Hatco’s liability and Buyer’s exclusive remedy hereunder will be limited solely to replacement of part under warranty) with respect to any claim made within the applicable warranty period referred to above. Hatco reserves the right to accept or reject any such claim in whole or in part. In the context of this Limited Warranty, “refurbished” means a part or Product that has been returned to its original specifications by Hatco or a Hatco-authorized service agency. Hatco will not accept the return of any Product without prior written approval from Hatco, and all such approved returns shall be made at Buyer’s sole expense. HATCO WILL NOT BE LIABLE, UNDER ANY CIRCUMSTANCES, FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR COSTS OR LOST PROFITS RESULTING FROM THE USE OF OR INABILITY TO USE THE PRODUCTS OR FROM THE PRODUCTS BEING INCORPORATED IN OR BECOMING A COMPONENT OF ANY OTHER PRODUCT OR GOODS.

AUTHORIZED PARTS DISTRIBUTORS

ALABAMA

ARIZONA

CALIFORNIA

  • Industrial Electric
  • Commercial Parts & Service, Inc.
  • Huntington Beach 714-379-7100
  • Chapman appl. Service
  • San Diego 619-298-7106
  • P & D appliance
  • Commercial Parts & Service, Inc.
  • S. San Francisco 650-635-1900

COLORADO

FLORIDA

GEORGIA

HAWAII

ILLINOIS

INDIANA

IOWA

KENTUCKY

LOUISIANA

MARYLAND

GCS Service

MASSACHUSETTS

MICHIGAN

MINNESOTA

MISSOURI

NEBRASKA

NEVADA

NEW JERSEy

NEW YORK

NORTH CAROLINA

OHIO

OKLAHOMA

OREGON

PENNSY LVANIA

RHODE ISLAND

SOUTH CAROLINA

TENNESSEE

TEXAS

UTAH

VIRGINIA

WASHINGTON

WISCONSIN

CANADA

BRITISH COLUMBIA

MANITOBA

NEW BRUNSWICK

ONTARIO

UNITED KINGDOM

  • marron Group
  • Orthants +44(0)1933 665313

HATCO CORPORATION
P.O. Box 340500
Milwaukee, WI 53234-0500 U.S.A.
800-558-0607 414-671-6350 partsandservice@hatcocorp.com
www.hatcocorp.com

Register your unit online!
See IMPORTANT OWNER INFORMATION section for details.

S’inscrire en ligne!
Lisez la section INFORMATIONS IMPORTANTES POUR LE PROPRIETAIRE pour plus de information’s.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Hatco User Manuals

Related Manuals