ZEBRONICS Zeb-PIXAPLAY Digital Projector User Manual
- June 3, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS Zeb-PIXAPLAY Digital Projector
Specifications
- Brand: ZEBRONICS
- Connector Type: USB, HDMI
- Screen Resolution: 1280 x 720
- Item Dimensions: 7 x 10.2 x 2.5 Centimeters
- Form Factor: Portable
Introduction
Dear Customer Thank you for purchasing the ZEB-Pixaplay 11 LED Projector. Please read the user manual carefully before usage & save it for future reference.
Note:
- To provide a stable power supply, kindly use the cable provided (DC19V, 2.SA) with the product and connects to an AC 100-240V, 50/60Hz power source.
- Avoid the self-disassembly of the product as it results in the failure of Warranty.
- Avoid looking directly at the projector lens while it is active.
- Make sure that the projector’s air vents are not blocked while in use. The device must be kept in a well-insulated surrounding for proper functioning.
- It is recommended to power OFF the projector after a continuous usage of 6 hours.
- Place the projector away from water or other liquids. Avoid water accumulation and ensure good ventilation.
- In case of enquiry regarding the projector, email us at enquiry@zebronics.com or contact us at 044 4000 0004.
Features
- Home Theater Projectors for Movies, TV & Gaming etc..
- Projector comes with mSD, AV IN, AUX OUT, USB,HDMI
- Built in Speaker
- Remote Control
- Compact Design
Specification
- Screen size: 112-381 cm
- Native Resolution: 1280x720P
- Supported Resolution: 1920 x 1080P (Max)
- Display Technology: LED
- Lifespan: 30,000H
- Brightness: 1500 lumens
- Contrast ratio: 1000: 1
- Projection Distance: S m- 5.6m
- Port Interface: mSD,AV IN,AUX OUT, USB,HDMI
- Video file format: 3GP,AVI, DIVX, H264, MOV, Mp4, MPEG1, MPEG2, MKV, VOB
- Input Voltage: DC19V, 2.SA
- Product Dimension (WxDxH): 147x 102x25mm
- Weight: 342g
When the Micro USB port is used as input using a 5V Adapter/Power bank, the output will be lower. Please use the provided Adapter for optimal results
Package Contents
- Projector
- Remote Control
- Power Adapter
- AV cable
- HDMI cable
Product Description
Remote Control
NOTE:
- To avoid power shortage, please do not mixed use the old and new battery.
- To avoid battery leakage corrosion, if do not use remote control for a long time, please take the battery out.
Projector Connection
- U disk or Portable External Hard Drive slot
- HDMI input slot
- AV inputs lot
- Earphone slot
- Micro SD (TF) card slot
Setting up the Projector
- Connect the power cord to the projector and turn it ON, You’ll be indicated with the white color LED near power button.
- Before turning ON, make sure to place it in a flat surface for a proper projection then Press the power button / turn it on by using the remote.
- Align the projector as shown in the image below to ensure proper projection.
Focus Adjustment
Once the projector turns ON, wait till it gets loaded. After boot-up adjust the focus knob in the projector until the images/video gets stabilized.
USB & SD Card Interface
Connect the USB Drive/MSD with the content to the projector. Select “Media” the content in the USB drive should be present inside the media (images Videos/Music).
Multi-Media Input Source Setting
HDMI, AV &AUX Interface
Support format: NTSC /PAL
- Once the HDMI / AV are connected to the projector, you will need to select the specific signal source as the input. After connected the content played from the source will be streamed on the projector.
- Connect the AUX for the external sound source
Picture Settings
Open the home page – “Setting”. In the Picture Setting, you can set up the projection mode, image scaling, aspect ratio and picture mode of the projector.
System Settings
Open the home page – “Setting”. In the System Setting, you can set up the OSD language, software update, factory restore and auto sleep of the projector.
FAQ’s
Can this be used with a mobile device?****
If the phone has an HDMI display,
Can we use our phones to play music?****
Not directly, but you can connect if your mobile device supports hdmi output.
Definition of native resolution****
HD (1280*720)
Bluetooth turned on? Is a Bluetooth soundbar compatible?****
You can connect with any speaker using an aux connection even though the projector is not wireless and lacks Bluetooth capability.
Can I stream Netflix or Prime with an Amazon Firestick connected?****
Yes. The best and greatest way to utilize this projector is in that manner.
Can we use a PS4?****
Yes, using an HDMI cable.
Is the Realme Google TV Stick compatible with it? Can I cast or mirror my phone with that?****
I do indeed use a Nokia media streamer. You can cast a mirror through it.
How about the display? Will it project on a wall?****
Yes, the colour of the wall affects clarity.
Is the Amazon Fire Stick compatible with this?****
Without a doubt amazon fire stick compatible with this projector
Does it function with a battery?****
A power bank, yes.
What are the native resolution and contrast ratio?****
720p is the native resolution.
How to link a phone to a projector****
Use to Chromecast
Is the aux sound out stereo?****
Yes, the aux cable has two red and white audio pins that you can use to attach your woofer or subwoofer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>