geo FENNEL GeoSpider Green Floor Line Laser User Manual
- June 3, 2024
- geo-FENNEL
Table of Contents
FENNEL GeoSpider Green Floor Line Laser
User Manualwww.geo-fennel.de
www.geo-fennel.com
www.geo-fennel.fr
Dear customer,
Thank you for your confidence in us having purchased a geo-FENNEL instrument.
This manual will help you to operate the instrument appropriately.
Please read the manual carefully – particularly the safety instructions. A
proper use only guarantees a longtime and reliable operation.
geo-FENNEL Precision by tradition.
FUNCTIONS AND FEATURES
- High visibility green laser lines
- Independently height adjustable legs for optimum results over the full working range
- Laser lines switchable separately
- Fine motion control for accurate alignment
- Fully rotatable laser head with 360° graduation for optimum flexibility
- Integrated circular bubble for manual levelling on uneven surfaces
SUPPLIED WITH
- Line laser GeoSpider GREEN
- 4 x AA alkaline batteries
- Magnetic target
- Padded bag
- User manual
Technical Data
Laser class | 2 |
---|---|
Accuracy | ± 3 mm / 10 m |
90° angle accuracy | ± 3 mm / 10 m |
Working range Ø | 40 m* |
Power supply | 4 x AA Alkaline |
Operating time | 5h |
Temperature range | -10°C to + 45°C |
Dust / water protection | IP 52 |
Dimensions | Foot Ø 26 cm x min. height 29 cm |
Weight (instrument w/o batteries) | 1,25 kg |
- depending on room illumination
OPERATIONAL ELEMENTS
- ON/OFF button
- ON/OFF LED
- 360° graduation
- Graduation index
- Laser emitting windows
- Adjustable tip
- Height adjustable tripod leg
- Fine motion contro
- Bubble
INSERT THE BATTERY
Hold the laser emitting part of the instrument and turn the instrument cover
on top in direction OPEN to open it.
Insert 4 x AA Alkaline batteries (take care of correct polarity) and close the
cover (turn it in direction LOCK).
OPERATION
Rotate the locking screws of the legs and adjust them to the required length. Take care that the bubble is perfectly centred which makes sure that the instrument works with highest accuracy.
Press the ON/OFF button to power on the laser and to project one laser line
simultaneously (the ON/OFF LED is illuminated); press the ON/OFF button a
second time to project a second laser line = laser cross.
Press the ON/OFF button again to power off the laser; the ON/OFF LED will
power off.
SETTING OF VARIOUS ANGLES
SAFETY NOTES
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting windows;
after the instrument has been dropped or hit. Please check the accuracy.
Large fluctuation of temperature: If the instrument will be used in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.
CARE AND CLEANING
Handle measuring instruments with care. Clean with soft cloth only after any
use. If necessary damp the cloth with some water. If the instrument is wet
clean and dry it carefully. Pack it up only if it is perfectly dry. Transport
in original container / case only.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
It cannot be completely excluded that this instrument will disturb other
instruments (e.g. navigation systems); will be disturbed by other instruments
(e.g. intensive electromagnetic radiation nearby industrial facilities or
radio transmitters).
CE Conformity: According to EMC 20014/35/EU.
WARRANTY
This product is warranted by the manufacturer to the original purchaser to be
free from defects in material and workmanship under normal use for a period of
two (2) years from the date of purchase. During the warranty period, and upon
proof of purchase, the product will be repaired or replaced (with the same or
similar model at manufacturers option), without charge for either parts or
labour. In case of a defect please contact the dealer where you originally
purchased this product. The warranty will not apply to this product if it has
been misused, abused or altered. Without limiting the foregoing, leakage of
the battery, bending or dropping the unit are presumed to be defects
resulting from misuse or abuse.
EXCEPTIONS FROM RESPONSIBILITY
- The user of this product is expected to follow the instructions given in the user manual. Although all instruments left our warehouse in perfect condition and adjustment the user is expected to carry out periodic checks of the product’s accuracy and general performance.
- The manufacturer, or its representatives, assumes no responsibility of results of a faulty or intentional usage or misuse including any direct, indirect, consequential damage, and loss of profits.
- The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits by any disaster (earthquake, storm, flood etc.), fire, accident, or an act of a third party and/or a usage in other than usual conditions.
- The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of data, loss of data and interruption of business etc., caused by using the product or an unusable product.
- The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused by usage other than explained in the user manual.
- The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or action due to connecting with other products.
INTENDED USE OF INSTRUMENT
The instrument emits a visible laser beam in order to carry out the following
measuring tasks (depending on the instru- ment): Setting up heights,
horizontal and vertical planes, right angles.
SAFETY INSTRUCTIONS
- Follow up the instructions given in the user manual.
- Do not stare into the beam. The laser beam can lead to eye injury. A direct look into the beam (even from greater distance) can cause damage to your eyes.
- Do not aim the laser beam at persons or animals.
- The laser plane should be set up above the eye level of persons.
- Use the instrument for measuring jobs only.
- Do not open the instrument housing. Repairs should be carried out by authorized workshops only. Please contact your local dealer.
- Do not remove warning labels or safety instructions.
- Keep the instrument away from children.
- Do not use the instrument in explosive environment.
- The user manual must always be kept with the instrument.
LASER CLASSIFICATION
The instrument is a laser class 2 laser product according to DIN IEC
60825-1:2014.
It is allowed to use the unit without further safety precautions.
The eye protection is normally secured by aversion responses and the blink
reflex.
The laser instrument is marked with class 2 warning labels.
Please note:
If you return instruments for repair / for adjustment to us please disconnect
batteries or rechargeable batteries from the instrument – this is for safety
reasons!
Thank you.
geo-FENNEL GmbH
Kupferstraße 6
D-34225 Baunatal
Tel. +49 561 / 49 21 45
Fax +49 561 / 49 72 34
info@geo-fennel.de
www.geo-fennel.de
All instruments subject to technical changes.
Precision by tradition.
Documents / Resources
| geo
FENNEL GeoSpider Green Floor Line
Laser
[pdf] User Manual
GeoSpider Green Floor Line Laser, GeoSpider Green, Floor Line Laser, Line
Laser, Laser
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>