Evergreen Classics TG76P4C27P03 Holiday Symphony Tree Installation Guide

Evergreen Classics TG76P4C27P03 Holiday Symphony Tree Installation Guide

IMPORTANT SAFETY INSTRUCTIONS

WARNING

When using electrical products. basic precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

1. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications. connect the product to a Ground Fault Circuit Interrupting IGFCI) outlet If one is not provided. contact a qualified electrician for proper installation.
2. This seasonal use product is not intended for permanent installation or use.
3. Do not mount or place near gas or electric heaters. fireplaces. candles or other similar sources of heat.
4. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
5. Do not let lamps rest on the supply cord or on any wire.
6. Unplug the product when leaving the house. or when retiring for the night (or if left unattended).
7. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
8. Do not use this product for other than its intended use.
9. Do not hang ornaments or other objects from cord. wire, or light string.
10. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
11. Do not cover the product with cloth, paper or any material not part of the product when in use.
12. Read and follow all instructions that are on the product or provided with the product.

SAVE THESE INSTRUCTIONS.

CAUTION

1. Set up the tree according to the number tag sequence attached to each tree section from the bottom to the top. Section #1 from the bottom o the tree stand, followed by Section #2 on top, and so on. Random setup will result in electrical malfunction.
2. Before first use, remove all protective packing materials around the Music Controller Speaker. Do not cover the Music Controller Speaker with unnecessary Items. This may cause distorted sound and damage the speaker. It can also cause the speaker to burn out.
3. To reduce the risk of fire and electric shock: al Use only the power supply that is provided with this product. Using a different adapter will damage the lights and may cause fire. or electrical shock hazards; III Do not install on trees that have needles. leaves or branches covering with metal or materials which look like metal; cl Do not mount or support strings In a manner that can cut or damage wire Insulation.
4. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
5. Do not connect the chain to the supply while it is in the packing.
6. The lamps are not replaceable.
7. Do not interconnect parts of this lighting chain with parts of another manufacturer’s lighting chain.
8. Interconnection shall be made only by the use of the supplied connectors. Any open ends must be sealed-off before use.

 Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for Information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get Into the food chain, damaging your health and well-being.

Use and Care Instructions

1. Belpre using or reusing. inspect product carefully. Discard any products that have cut damaged. or hayed see Insulation or cords. cracks In the lampholders or enclosures. loose connections. or exposed copper wire.
2. When storing the product carefully remove the product from wherever it Is placed. including trees. branches, or bushes. to avoid any undue strain or stress on the product conductors. connections. and wires.
3. When not in use. store neatly in a cool dry loc000n protected from sunlight.

Technical Specifications

AC Adapter
Input: 120 V ~ / 60 Hz, 2 A
Output: DC 24 V, 2 A
Controller: 2 A

Physical Setup

Remote Control Instructions

Remove the insulation tab of the remote controller.

Key Function

Song List:

1. Carol of the Sugar Plums

2. Deck the Halls

3. Candela Teaser

4. Joy to The World/0 Come All Ye Faithful

5. We Wish You a Merry Jingle Bells

6. Russian Dance

7. Toys on the Housetop

8. Random Light Colors/Effects (“Beautiful Movement”: Pre-programmed light effects cycle without music accompaniment)

9. Warm White Steady Glow

10. Warm White Twinkling

11. Multi-Color Steady Glow

12. Multi-Color Twinkling

13. Off

This product may potentially trigger seizures for people with photosensitive epilepsy when using the motion effect light modes.

Aux Outlet

Songs can be played via an external speaker, simply connect the Music Controller Speaker to an external speaker with a 3.5 mm audio cable. Once connected to an external speaker, there will be no sound output from the controller speaker.

Battery Replacement

1. Loosen the screw from the battery cover of the remote controller with a screwdriver (not included).
   

2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed with the correct polarity (+ and -).

3. Retighten the screw to close and secure the battery cover.
   

WARNING

1. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children. Ingestion of such batteries has been known to cause death.
2. This is a lithium battery which if swallowed has been known to cause death.
3. Small parts. keep batteries out of reach of children.
4. Do not expose the remote controller to moisture.
5. Dispose of used batteries properly ( by following directions on batteries).and local laws and regulations regarding the disposal of hazardous waste.
6. Clean the battery contact surfaces prior to battery installation.
7. Remove batteries when not used for an extended period of time. or when depleted.
8. Use only CR2032 button cell battery for remote controller.
9. Do not dispose of batteries in fire — batteries may leak or rupture.

STORAGE INSTRUCTIONS

1. Unplug from power source, and detach plug from adapter. Remove all ornaments and decorations.
2. Disassemble the tree from top to bottom. Gently lift pole straight up to remove from the lower section, and fold all branches toward the pole.
3. Close the protective caps on the poles to avoid damaging the internal parts.
4. Place the disassembled tree into the shipping box and tape it shut.
5. Store your tree in a cool, dry place away from sunlight. Exposure to excessive heat or humidity may damage your tree.

TROUBLESHOOTING TIPS

It Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker

1. Check to make sure that all plugs and adapter are properly connected as indicated.
2. Turn the poles gently to make sure pole-to-pole connection is secured.

Loose Hinge Pin

1. Place the branch into the hinge bracket.
2. Insert a new hinge pin all through the holes of bracket, and secure with a washer.

SPARE PARTS

This tree includes sets of hinge pins & washers. If extra parts are needed, please contact our customer service center.
www.polygroupstore.com or +1 (8881 919-0070.

Polygroup Trading Limited
Unit 606, 6th Floor, Fairmont House,
No.8 Cotton Tree Drive,
Central, Hong Kong

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>