Direct Ptt 2A9QQ-M995 In-Vehicle POC Network Mobile Radio Instruction Manual

Direct Ptt 2A9QQ-M995 In-Vehicle POC Network Mobile Radio

Welcome to using two-way Radio

To Customers
Thank you very much for using two-way radio, a truly versatile, compact, and durable radio that will provide reliable and high-quality communication. Before the operation and to obtain the best performance, please read this manual carefully to become familiar with the radio’s features and uses.

User Safety Information

Before using your new PoC network radio, please read the following safety recommendations carefully:

• Do not attempt to repair, disassemble or re-assemble the radio.

• Repair should only be carried out by a qualified Radio Engineer.

•  In order to avoid electromagnetic interference, please tum off the radio in any areas where radio transmissions are not
  permitted e.g. Hospitals, Aircraft, etc.

• Do not place a radio in any area over, or in the deployment area of an Air Bag within a vehicle.

• Never operate the radio in potentially flammable and explosive atmospheres.

•  Never replace or charge batteries in potentially flammable and explosive atmospheres.

•  Do not operate the radio if its antenna is damaged.

•  Do not place the radio in excessively dusty, humid, and/or wet areas.

• Do not expose the radio to long periods of direct sunlight, for example on the dashboard of a vehicle or close to heating
  appliances.

• Keep a distance of at least 20 cm between the antenna and your head and body when transmitting

Supplied Accessories
Please open the box carefully and check that the following items are included. If you find any items missing or have been
damaged during shipment, please contact your dealer immediately. Equipment and Accessories Supplied:

Getting Acquainted
Diagram

Getting Acquainted

1. Volume Control Knob & Power ON/OFF Button
   Please long press it to power ON or power off the radio. Tum the volume knob clockwise to increase the volume level, and turn the volume knob counter- clockwise to reduce the volume level.

2. LED Indicator
   It lights Yellows for a few seconds during power is on. It lights RED during transmission. It lights GREEN during the receiving.

3. Emergency Alarm
   Please long-press this button to activate the emergency alarm/SOS function, and long-press again to exit.

4. Speaker MIC Connector
   Please insert air plugs MIC speaker with8 pinholes press and hold the PTT button, the radio will bleep and the LED indicator will turn RED (that means transmitting is valid), then speak clearly Into the microphone with your normal voice(remember to keep the MIC around 2.5-5CM from your mouth)

5. LCD Display
   Kindly note: this is the non-touching screen.

6. Functional Key
   Please short press to UP the groups and long press to enter into the Network Mode selection

7. Functional Key
   Please short press to DOWN the groups and long press to switch the Backlights Mode.

8. UP/DOWN/LEFT/RIGHT Key
   Please press it to choose the desired items from the menu

9. Menu Key(Green-)

10. Backup Key(Red )

11. MIC Speaker

12. GPS Antenna Connector

13. 4G Antenna Connector

14. Power Supply Connector
    Kindly note: Please connect to 12V/24V AC Power from a car.

15. Headset/Earpiece Connector

16. Micro USB Programming Cable Connector
    lease long press functional key- – and functional key-at the same time and I’m ON the radio device, it will enter into a waiting mode SETACOOUNT avtAB. ID: sfetest1

17. SIM CARD 1
    Kindly note: It only supports Micro sim cards. Please refer to the comer, aware of inserting the sim card on the right side.

18. SIM CARD 2
    Kindly note: It only supports a Micro sim card. Please refer to the comer, aware of inserting the sim card on the right side.

• LCD Display
  Carrier Network Signal Strength. lt indicates valid carrier network signal strength 4G Current Network Mode. Please long press functional key

•  to enter into network mode settings.
  SIM Card Indicator: Currently working on SIM CARD 1 Backlight Auto Mode.

• Display current local time indicates backlight always ON

• Current Group Name Td Current Week Day

• Current Own User Name 2020-07-015 Current Date

**Menu Function Operation

**

Basic Settings
Contracts

Group Call

1. Press to enter into the MENU list
2. Select [CONTRACTs] and press to confirm and enter;
3. Select [GROUPS]and press to confirm and enter;
4. Press to select the target group and press to confirm. ( UP, v DOWN, 4 reverts to the front page, revert to next page)

Individual Call/Single Call

1. Press B to enter into the MENU list
2. Select [cONTRACTS] and press to confirm and enter;
3. Select [GROUPS]and press to confirm and enter;
4. Pressto selects the target group and presses to confirm. ( UP, v DOWN, revert to the front page, revert to next page)

Good Friends Call

1. Press B to enter into the MENU list
2. Select [CONTRACTS] and press to confirm and enter
3. Select [GROUPSJand press to confirm and enter;
4. Press to select the target group and press to confirm. ( UP, DOWN, 4 reverts to the front page, revert to next page)

LCD Backlight

1. Press B to enter into MENU List;
2. Select [SETTINGS] and press to confirm and enter
3. Select [LCD BACK LIGHT] and press to confirm and enter;
4.  Press to switch between (Auto Mode) and (Always ON)

LCD Light Level

1. Press to enter into the MENU list,
2. Select [SETTINGS] and press to confirm and enter
3.  Select [LCD LIGHT LEVEL] and press B to confirm and enter:
4. Press 4 to select the desired backlight level ( Range from level 1-level 5).

Key BackLight

1. Press to enter into the MENU list,
2. Select [SETTINGS] and press B to confirm and enter;
3. Select [KEY BACK LIGHT] and press to confirm and enter;
4. Press B to switch between AUTO and ON.

Network Mode

1. Press to enter into the MENU list,
2. Select [ETTINGS] and press B to confirm and enter;
3. Select [NETWORK MODE] and press to confirm and enter
4. Press to switch between 4G Only,3G Only,2G Only, and AUTO mode.

Sound

1. Press B to enter into the MENU list,
2. Select [OUND] and press B to confirm and enter;
3. Select [KEY TONE] and press B to confirm and enter
4. Press B to switch ON or OFF

Talk Tone

1. Press B to enter into the MENU list,
2. Select SOUND] and press B to confirm and enter;
3. Select [KEY TONE] and press 9 to confirm and enter
4. Press B to switch ON or OFF.

Voice Code

1. Press B to enter into the MENU list,
2. Select [SOUND] and press B to confirm and enter;
3. Select [VOICE CODE] and press B to confirm and enter;
4. Press B to switch between 4K and 8K

MIC Gain

1. Press B to enter into MENU ist,
2. Select $OUND] and press B to confirm and enter
3. Select [MIC GAIN] and press B to confirm and enter;
4. Press B to select the desired MIC gain level. ( Range from level 1-level 6)

SPK Gain

1. Press B to enter into the MENU list,
2. Select [SOUND] and press B to confirm and enter;
3. Select [SPK GAIN] and press 9 to confirm and enter;
4. Press B to select the desired speaker gain level. (Range from level 1 to level 6)

GPS Function

• Press B to enter into the MENU list,
• Select [SIM CARD] and press B to confirm and enter;
• Press to switch between SIM CARD 1, SIM CARD 2, and AUTO.
• Device Info il 4G A 00:00
• SOFT Ver: GV7.A.2 ZZD
• SET
• BACK
• Press B to enter into the MENU list,
• Select [DEVICE INFO] and press B to confirm and enter.

Technical Specifications

Trouble Shootıng and Maintenance

Maintenance and Cleaning

Do not carry the transceiver by the antenna or attached audio accessories. Always turn the transceiver OFF when attaching or
detaching audio accessories. Clean the buttons, control knob, and radio body with a dry cloth when it has been unused for a long time or becomes dirty.

Warranty and Service

This device complies with part 15 of the FcC Rules. Operation is subject to the following two conditions this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interterence will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technic1an for help

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>