3mk Wireless Car Charger User Manual
- June 3, 2024
- 3mk
Table of Contents
Wireless Car Charger
User Manual
SPECIFICATION
WIRELESS CAR CHARGER SPECIFICATION
Input voltage/current: 5V/2A, 9V/1.67A, 12V/1.67A
Output power: 5W/7.5W/10W/15W
Charging power: 110k-205k Hz
Charging efficiency: ≥ 72%
Charging distance: ≤ 8mm
A: Wireless charger transmitting panel
B: Silicone pad
C: Adjustable fixing clamp arm
D: Touch key
E: Indicator light
F: Adjustable bottom bracket
G: Front cooling hole
H: Rear cooling hole
I: Suction cup support rod
J: Angle fixing knob of support rod
K: Suction cup press button
L: Center console fixed suction cup
WIRELESS CAR CHARGER INSTALLATION PROCESS
How to use the wireless charger
1. Remove the fixing screw.
2. Hang it on the connecting part of the support
3. After combining with the charger body, tighten with strength.
- Support length fixing knob
- Support angle fixing knob
- Vent fixing cradle
- Adjust the bottom tray to adapt to different mobile phone charging position
PRODUCT FEATURE
- Smart touch button on both sides.
- Built-in high-performance endurance capacitor, after the car turned off. It can support to use the touch button to open the arms on both sides and take off the phone.
- Built-in wireless charging transmitter coil, supporting wireless charging with QI standard mobile phone or QI standard receiver.
- The base support can be adjusted up and down.. The bottom bracket and the left and right clamping arms have anti-skid silicone pad. The left and right clamping arm anti-skid silicone pad has the phone button position, and it won’t press on the phone button.
- The product design has front/rear heat dissipation holes and ventilation convection heat dissipation, in order to keep low temperature charging and the whole process of rapid charging.
- Mute motor to keep long life span
- Standby mode: connect the power through USB cable, and the LED lights on both sides will flicker alternately blue and green to enter standby mode.
- Charging mode: during wireless charging mode, the LED lights on both sides will be blue and when the receiving end to be removed, the indicator light will be off.
- Intelligent identification function, such as metal or metal mobile phone shell, bank card and other magnetic items, will have a blue and green light flashing, and no wireless charging.
- All-round protection: such as temperature, short circuit, overvoltage, overcurrent, etc.
PRODUCT USAGE GUIDELINES
- To ensure sufficient current for the wireless charger, please select the USB power port connection of QC2.0 or QC3.0. Ensure input current 2A.
- Before using the product, please check whether the product is connected to the power supply. When the power is switched on, the indicator lights on both sides will flicker alternately blue and green, and then the lights will go out.
- When the wireless charger is connected to the power, the clamping arms on both sides will open automatically. Keep it open. A mobile phone with an QI standard or QI standard receiver is placed on the device, and the wireless charger transmitter senses the the phone and starts charging, which will automatically close the arms. When not using QI standard mobile phone, please press one of the buttons on both sides and the left and right clamping arms will close automatically. If the mobile phone needs to be taken out, press one of the buttons on both sides, the left and right clamping arms willopen automatically to take out the mobile phone.
- The transmitting end and receiving end of wireless charging do not match, which may lead to high charging temperature or failure of charging. The base support of this equipment can be adjusted up and down. For the first use, the base bracket can be adjusted to the corresponding position of the wireless charger according to the size of the mobile phone. For example: the phone body is long, the bottom bracket to pull down, the phone body is short, the bottom bracket can be pushed up.
- This device is not equipped with a wireless charger receiver. If your phone does not support wireless charging, please buy a wireless charger receiver suitable for your phone.
WARNINGS
- Please do not throw, crush or collide.
- Please do not disaddemble and install the wireless charging device by yourself.
- Please do not use it in severe high temperature, high humidity or corrosive environment to avoid leakage in demaged circuit.
- Please do not wipe the equipment with water or liquid when the power is connected to prevent leakage of electricity.
- This equipment shall be equipped with standard QC2.0 or QC3.) car charger.
CHARGER SAFETY
- When charging the device, the power socket should be installed near the device and should be easily accessible.
- When charging is completed or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
DISPOSAL AND RECYCLING INFORMATION
This symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designed by local authoritaries at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment.
Declaration of Conformity (DoC)
Hareby 3mk Protection sp. z o.o, declares that this product is in compliance
with essential requirements and other relecant prvisions od Directive
2014/53/EU.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>