3mk Protection Fuego Speaker User Manual

3mk Protection Fuego Speaker

Package List

Diagram

1. 1WS/EQ
2. Volume-/Previous track
3. Pause/Play
4. Volume+/Next track
5. Power button
6. Type-C charging port
7. Power/Bluetooth indicator light
   

Turning the device on/off

Turning the device on/off

To turn the device on/off, press and hold the power button for 2 seconds. The BT connection will be automatically terminated within 30 minutes after music playback is over.
The device will automatically tum off within 10 minutes of no BT connection.

Bluetooth connection

BT connection

Place the speaker at a distance of less than 1 m from the device. Press and hold the power button for 2 seconds. The BT indicator will blink blue while connecting and will glow solid blue when the BT connection is established.

Play/pause and volume control

Play/ Pause and Volume control

To start or stop playback press the Play/Pause button once. To turn up the volume, press the Volume up/Next track button. To turn down the volume, press the Volume down/ Previous track button. To switch to the next audio track, press and hold the Volume up/ Next track button. To switch to the previous audio track, press and hold the Volume down/ Previous track button.

Equalizer modes

Equalizer modes

Press the TWS pairing/Switching equalizer modes button twice to switch EQ1 or EQ2:
EQ1: General equalizer
EQ2 : Bass boost equalizer

The indicator shows the active equalizer:
EQ1 : Indicator turns solid blue
EQ2 :lndicatorblinksblue
(is the default equalizer)

How to charge

How to charge

1. Insert the Type-C cable into the speaker, and then insert the USB-A connector into a PC or DC charging adapter with a USB-A input to charge, or use a fast charger with a Type-C (not included). While charging, the device indicator is red. The standard charging time isabout3.5hours.
2. The speaker can keep playing music while charging. The red indicator light will turn off as soon as the speaker is fully charged.

Whenusingthebatteryforthefirsttime,itisrequiredtomakeitsinitialcalibration:start using it without preliminary charging until it is completely discharged. After that, fully charge the battery. To achieve maximum capacity, it is necessary to carry out 3 complete charge-discharge cycles of the battery.

Switch Between 2 Bluetooth Devices

Step1

Step2

TWS Connection[Twin Speakers Mode)


lndicator flashing blue before pairing Blue indicator always ON after BT connected

TWS pair to play.

To implement a wireless connection between two speakers follow the steps on both devices:

1. Press and hold the power button on the turned-off speaker for 2 seconds to switch to the BT device search mode (the indicator light will start blinking blue} on2devicessimultanously
2. Press the BT connection button once (only on 1 device) (the light indicator will stop blinking and will turn solid blue, indicating a successful connection)

Restore factory settings

Factory reset
Press and hold the BT connection button for 7 seconds. You will hear a beeping sound to indicate that the speaker has reset to factory settings.

Storage
The speaker should be stored in a clean, dry and ventilated place with an ambient temperature between +5 and 40 °C. Avoid contact with corrosive substances, keep the product away from fire and heat sources. Charge the device once every six months when not in use.

Instructions for use:

• Product cannot be opened or modified
• Do not disassemble the device or attempt to service it
• If the product is in an environment where the temperature exceeds the permissible range, turn off the device and wait until the operating temperature stabilizes within the specified range

Disposal and recycling information

This symbol on the product battery, attached documents, or packaging means that the products and batteries should be taken to separate waste collection points designed by local authorities at the end of the lifespan. This will ensure that WEEE waste isrecycledandtreatedinamannerthatconservesvaluablematerialsandprotects human health and the environment.

Declaration of Conformity (DoC)

Hare by 3mk Protection sp. z o.o. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU.

Technical Specifications

More information

www.3mk.global/fuego

3mkProtectionsp.zo.o.
Krotoszyl’lska35,B-02/4a 03-400 □str6wWielkopolski.Poland VATIDPL0222833080

Designed in Poland by3mkProtection Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>