UNONU J8 Bar Phone User Guide
- June 3, 2024
- UNONU
Table of Contents
UNONU J8 Bar Phone User Guide
Introduction
Thank you for purchasing this innovative UNONU device. The specifications in
this document are subject to change without prior notice.
UNONU and the UNONU logo are registered trademarks of Swagtek, Inc. Other
trademarks are the property of their respective owners.
Charge For 24 hours before using
Install SIM Card / Memory Card
Get to know your UNONU phone
Connect your UNONU phone To the computer using a USB cable (not
included)
Copy music Files From your computer to your UNONU phone.
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, If
not installed and used in accordance with the Instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the emission limits for exposure
to radiofrequency (RF) energy set by the Federal Communications Commission of
the U.S. Government These limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies.
The standards include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg.
Tests for SAR are conducted with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level.
The actual SAR level of the phone while operating can be well below the
maximum value.
This is because the phone is designed to operate at multiple power levels so
as to use only the power required to reach the network.
In general, the closer you are to a wireless base station antenna, the lower
the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by the
government adopted requirement for safe exposure.
The tests are performed In positions and locations (e.g., at the ear and worn
on the body) as required by the FCC for each model.
The highest SAR value for this model phone when tested for use at the ear is
0.396W/Kg and when worn on the body, as described in this user guide, is
0.472W/Kg(Body-whom measurements differ among phone models, depending upon
available accessories and FCC requirements).
The maximum scaled SAR in hotspot mode is 0.498W/Kg.
While there may be differences between the SAR levels of various phones and at
various positions, they all meet the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model phone with all
reported SAR levels evaluated as in compliance with the FCC Exposure
guidelines.
SAR information on this model phone is on file with the FCC and can be found
under the Display Grant section of http://www.fcc.gov/oet/ficid after
searching on FCC ID: 055185118 Additional information on Specific Absorption
Rates (SAR) can be Found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com.* In the United States
and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The standard incorporates a sub-
spatial margin of safety to give additional protection for the public and to
account for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations.
To comply with RF exposure requirements, a minimum separation distance of 10mm
must be maintained between the user’s body and the handset, including the
antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components.
Body-worn accessories that do not meet these requirements may not comply with
RF exposure requirements and should be avoided.
Use only the supplied or an approved antenna.
Warranty Certificate Terms And Conditions
UNONU warrants that their Products will be free From defects in material and
workmanship.
The warranty period is one (1) year for the products and three (3) months for
the accessories which are part of the original package including the battery.
The warranty period begins the date of purchase by the End-User who shall
present an invoice or a purchase receipt when requiring warranty service
otherwise the warranty period will begin from the date of manufacture of the
product. UNONU will repair a product without cost to the customer if it
presents a manufacturing defect or defect in workmanship during the warranty
period and if the defect occurred under normal conditions of use in accordance
with the instructions and specifications stated in the user’s manual.
For additional information about the terms and conditions of UNONU’s Limited
Warranty or to obtain warranty service information, please visit the support
section at: unonumobile.com
Customer Support
unonumobile.com
Made in China
Copyright Swagtek, Inc. 2019
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>