UNONU UB10 Power Bank User Guide
- June 4, 2024
- UNONU
Table of Contents
Model: UB10 USERG
Power Bank
The charger supports most of the DC-5V USB input digital electronic products.
Note
Before using the product, please read this user guide carefully.
- Please choose the right connector which matches the device model;
- Fully charged for the first time users will activate the maximum capacity of the internal battery;
- Please use the original accessories when charging the power bank;
- Please remove the cable when the power bank is fully charged so as to save power;
- Do not place or use the charger at high temperatures, sealed or humid environments;
- For a long time no use, please keep the charger in a cool dry place and charge it every 3 months to make sure that the cells are in the best status.
Safety Notice
- 1t is forbidden to throw, strongly press or Impact the product;
- Make sure that the surface of the power bank is not covered;
- Keep the power bank off the fire, high temperatures, and humid environment;
- Do not expose the product to sunshine or liquid;
- Please keep the input and output interface clean;
- Make sure that those people who are inexperienced or mentally and physically disabled do not use the product unless they are offered appropriate supervision or guidance. Please keep the product out of the reach of the children;
Product Introduction
Adopting highly efficient boost and battery-protective intelligent IC, this portable power bank can provide 6 protection functions, they are cell over- charge protection, cell discharge protection, cell short-circuits protection, output over current protection, output short-circuit protection, and over- power protection. Compatible with Android/OS and WP systems, the power bank features high operating efficiency and low electricity loss hibernate mode. With a delicate and fashionable appearance, UBIO should be your first choice.
Operation instruction
After pressing the key, the power of UBIO Is >75% If 4 Indicator lights are on; the power of UBIO goes between 75%-50% if 3 indicator lights are on; the power goes between 50%-25% if 2 indicator lights are on; the power goes between 25%-0 of 1 Indicator light Is on; it Indicates no power If no indicator light is on, and UB10 requires charging. After displaying the power, it enters power saving mode after approximately 32 seconds.
| LED indicator light | Power level |
|---|---|
| LED 1 illuminated | 0-25% |
| LED 1,2 illuminated | 25-50% |
| LED 1,2,3 illuminated | 50-75% |
| LED 1,2,3,4 illuminated | 75H00% |
Charge your power bank
- Select the original USB cable, connect the Micro USES connector to the Micro USB input port of the power bank or TYPE-C connector to the TYPE-C input port;
- Connecting the USB connector of the cable with the USB port of the PC or DC 5V USB charger, the LED lights start to flicker to indicate the charging process has started. Please refer to the following drawing for more details.
- When four LED lights are on permanently, UBIO is fully charged; when the last LED flickers, it means the remaining power is low, please charge the power banks as soon as possible. Connect the USB connector of the cable with the USB port of the PC or DC SV USB charger, once It Is fully charged, please stop charging.
During the charging process of UBIO: When the display flickers, it illustrates that the power bank is being charged. The LED light on permanently indicated the current power of the power bank; When four LED lights to light on permanently, it is fully charged; When charging with PC, the charging speed can be slow for the Input current limitation.
Charging for other digital devices
- Check the charging voltage of the digital devices and make sure that it is matched with the DC 5V output voltage of the power bank;
- Connect the digital devices and power bank with the original cable and then charging start.
The following figure takes Samsung as a charging example.
When charging for other devices: Activate the On-off key, when the LED lights
flickers, it shows it provides a normal power supply; The LED light lighting
on permanently indicates the current remaining power, and when the last LED
light flickers, it means power bank has no power, please charge the power bank
first before charging other devices
Specification
| Model Name: | UB10 |
|---|---|
| Capacity: | 3.7V/10000mAh 37Wh |
| Size: | 1406614mm |
| Charging time: | 5 hours |
| Color: | black, white |
| Battery: | polymer battery |
| Micro/Type-c Input: | DC 5V/2.1A |
| USB Output: | DC 5V/2.4A(max) |
| Cycle Times: | >500 times |
| Working Temperature: | 0-45°C |
| Operating Humidity: | 25%-85% |
| Storage Temperature: | 0-45°C |
| Storage Humidity: | 25%-85% |
Name and content of hazardous substance
| Model No | Hazardous substance |
|---|---|
| pb | Hg |
| UB10 | X |
0: means that the content of hazardous substances is all materials of the
power bank is within the limited requirements of SJ/T 11362-2006.
X: means that the content o hazardous substance is beyond the limited
requirement of SJ/T 11362-2006.
Troubleshooting
Phenomenon description: Failure In supply power for other devices
a.Fall to connect the power bank and digital devices:| Correctly connect the
power bank and digital devices with the Micro USB cable
b. The operating temperature goes beyond the limited temnerariire| Please
operate within the specified temperature.
c.Low remaining power cannot provide power supply:| Charge the power bank.
d.The digital devices are not in the power charging mode:| Please make sure
that the digital devices have been settled to charging mode; switch on the
device before charging; select the original accessory and choose the
compatible mode.
Phenomenon description: Failures in supplying long time power supply
a. Connector or USB Interface Is dirty:| Please clean the connector and USB
interface to make sure that the connection Is not influenced by impurities.
b.The operating temperature goes beyond the limited temperature:| Please
operate within the specified temperature.
c.The power bank is rated at the end of the life cycle or broken:| If the
power supply time of the charger is still very short after being fully
charged, then it means the power bank has reached its life span (life span
depends on the using condition). If the power bank is broken, please contact
the retailer or authorized after-sales service networks.
d. Low remaining power:| Charge the power bank.
Warranty Certificate Terms and Conditions
UNONU warrants that their Products will be free from defects in material and
workmanship. The warranty period is one (1) year for the products and three
(3) months for the accessories which are part of the original package
including the battery. The warranty period begins on the date of purchase by
the End-User who shall present an invoice or a purchase receipt when requiring
warranty service, otherwise, the warranty period will begin from the date of
manufacture of the product. UNONU will repair a product, without cost to the
Customer, if it presents a manufacturing defect or defect in workmanship
during the warranty period and if the defect occurred under normal conditions
of use in accordance with the instructions and specifications stated in the
User’s manual.
For additional information about the terms and conditions of UNONU`s Limited
Warranty or to obtain warranty service information, please visit the support
section at: unonumobile.com
Android is a trademark of Google LLC.
unonumobile.com
Designed in the USA / Made in China
Copyright Swagtek, Inc. 2019
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>