SESSAK LIGHTING K48618-3 Maxence 3-Piece Pendant Light Instruction Manual
- June 3, 2024
- SESSAK LIGHTING
Table of Contents
MAXCENCE
K48618-3
220-240V ~ 50/60Hz
5 xX E27 Max. 40W
K48618-3 Maxence 3-Piece Pendant Light
Read the entire instructions before installing the luminaire Save the
instructions for potential future need. Disconnect the electrical power-supply
before installation or service.
If the electrical cord of the luminaire becomes damaged, the lumnaire must be
discarded.
Symbols that POTENTIALLY can be found on the luminaire and their meaning.
CHECK the luminaire.
Class I. The luminaire must be connected to protective earth.
Class II. The luminaire is double-insulated and is not to be connected to
protective earth.
The product conforms with health, safety, and environmental protection
standards for products sold within the European Economic Area (EEA)
The protective earth cable (usually yellow-green) is connected to the terminal
identified by this symbol.
The phase (live) cable (usually brown) is connected to the terminal identified
by this symbol (L)
The neutral cable (usually blue) is connected to the cable identified by this
symbol (N)
States the minimum distance in meters to the area that is to be illuminated,
TAKE INTO ACCOUNT doors, widows etc., that could possibly come within this
distance when they are opened.
Ingress Protection class 21 (protection against dripping water)
Ingress Protection class 44 (protection against splashing water)
The HIGHEST ALLOWED power of the bulbs in Watts
Only for indoor use
Is NOT to be thrown away with household waste. You can help in the protection
of the enviroment by taking discarded products to a recycling-station intended
for them.
SESSAK OY AB – PORVOO – FINLAND – WWW.SESSAK.FI