SESSAK LIGHTING THEA Brass/Clear User Guide
- June 4, 2024
- SESSAK LIGHTING
Table of Contents
SESSAK LIGHTING THEA Brass/Clear
K50717-1
220-240V – 50/60Hz 1 x E27 Max. 40W
Read the entire instructions before installing the luminaire Save the
instructions for potential future need. Disconnect the electrical power-supply
before installation or service.
Symbols that can be found on the and their meaning the luminaire.
Class I. The luminaire must be connected to protective earth.
Class II. The luminaire is double-insulated and is not to be connected to
protective earth.
C E The product conforms with health, safety, and environmental
European Economic Area (EEA)
1-L\ The protective earth cable (usually yellow-green) is connected to Q the
terminal identified by this symbol.
States illuminated, the TAKE minimum INTO distance ACCOUNT in meters doors, to
the widows area that etc., is that to be
IP21 Ingress Protection class 21 (protection against dripping water) IP44
Ingress Protection class 44 (protection against splashing water)
W The HIGHEST ALLOWED power of the bulb(s) in Watts
Only for indoor use
Is NOT to be thrown away with household waste. You can help in the protection
of the environment by taking discarded products to a recycling-station
intended for them.
