SESSAK LIGHTING Millie K49718-1 Ceiling Light Instruction Manual
- June 4, 2024
- SESSAK LIGHTING
Table of Contents
SESSAK LIGHTING Millie K49718-1 Ceiling Light
Read the entire instructions
before installing the luminaire Save the instructions for potential future
need. Disconnect the electrical power-supply before installation or service.
If the electrical cord of the luminaire becomes damaged, the luminaire must be
discarded.
Symbols that can be found on the and their meaning. the luminaire.
Class I. The luminaire must be connected to protective earth.
Class II. The luminaire is double-insulated and is not to be connected to
protective earth.
1-L\ The protective earth cable (usually yellow-green) is connected to Q the
terminal identified by this symbol.
L The phase (live) cable (usually brown) is connected to the terminal
identified by this symbol (L)
IP21 Ingress Protection class 21 (protection against dripping water)
IP44 Ingress Protection class 44 (protection against splashing water)
Only for indoor use
Is NOT to be thrown away with household waste. You can help in the protection
of the environment by taking discarded products to a recycling-station
intended for them.
