SESSAK LIGHTING N49210-1 ISA Clip-On Spotlight Instruction Manual
- June 4, 2024
- SESSAK LIGHTING
Table of Contents
ISA
N49210-1 220-240V – 50/60Hz
1 x E14 Max. 5W
N49210-1 ISA Clip-On Spotlight
Read the entire instructions before installing the luminaire Save the
instructions for potential future needs. Disconnect the electrical power
supply before installation or service.
If the electrical cord of the luminaire becomes damaged, the luminaire must be
discarded.
Symbols that POTENTIALLY can be found on the luminaire and their meaning.
CHECK the luminaire.
Class I. The luminaire must be connected to protective earth.
** Class II. The luminaire is double-insulated and is not to be connected
to protective earth.
The product conforms with health, safety, and environmental protection
standards for products sold within the European Economic Area (EEA)
The protective earth cable (usually yellow-green) is connected to the terminal
identified by this symbol.
L The phase (live) cable (usually brown) is connected to the terminal
identified by this symbol (L)
N The neutral cable (usually blue) is connected to the cable identified
by this symbol (N)
States the minimum distance in meters to the area that is to be illuminated,
TAKE INTO ACCOUNT doors, widows, etc., that could possibly come within this
distance when they are opened.
IP21 Ingress Protection class 21 (protection against dripping water)
IP44 Ingress Protection class 44 (protection against splashing water)
The HIGHEST ALLOWED power of the bulb(s) in Watts
** Only for indoor use
Is NOT to be thrown away with household waste. You can help in the protection
of the environment by taking discarded products to a recycling station
intended for them. 
SESSAK OY AB – PORVO0 – FINLAND – WWW.SESSAK.FI