SESSAK LIGHTING K49618-3 Edith Pendant Lamp Instruction Manual
- June 3, 2024
- SESSAK LIGHTING
Table of Contents
K49618-3 Edith Pendant Lamp
Instruction Manual
K49618-3 Edith Pendant Lamp
EDITH
K49618-3 220-240V ˜ 50/60Hz 3 x G9
Max. 25W
Read the entire instructions before installing the luminaire Save the
instructions for potential future need.
Disconnect the electrical power-supply before installation or service.
If the electrical cord of the luminaire becomes damaged, the lumnaire must be
discarded.
Symbols that POTENTIALLY can be found on the luminaire and their meaning.
CHECK the luminaire.
Class I. The luminaire must be connected to protective earth.
Class II. The luminaire is double-insulated and is not to be connected to
protective earth.
The product conforms with health. safety, and environmental protection
standards for products sold within the EuropeanEconomic Area (EEA)
** The protective earth cable (usually yellow-green) is connected to the
terminal identified by this symbol.
L The phase (live) cable (usually brown) is connected to the terminal
identified by this symbol (L)
N The neutral cable (usually blue) is connected to the cable identified
by this symbol (N)
States the minimum distance in meters to the area that is to be illuminated,
TAKE INTO ACCOUNT doors, widows etc.. that could possibly come within this
distance when they are opened.
IP21 Ingress Protection class 21 (protection against dripping water)
IP44** Ingress Protection class 44 (protection against splashing water)
The HIGHEST ALLOWED power of the bulbs In Watts
Only for indoor use
Is NOT to be thrown away with household waste. You can help in the protection
of the enviroment by taking discarded products to a recycling-station Intended
for them.
SESSAK OY AB
– PORVO0
– FINLAND
– WWW.SESSAK.FI
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>