vtech 80-199580 Learning Pup Watch Instruction Manual

: June 4, 2024
: vtech

vtech 80-199580 Learning Pup Watch Instruction Manual

INTRODUCTION

Thank you for purchasing the Learning Pup Watch.
Enjoy this great wearable gadget for children with four built-in games to test their skills at matching, problem-solving and maths as they go on an adventure with the PAW Patrol pups.
Product Overview

INCLUDED IN THE PACKAGE

Learning Pup Watch
One CR2450 battery
Quick Start Guide

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.

PRODUCT SPECIFICATION

Battery One CR2450 battery
Time Format 12h or 24h
Display Digital
Optimum Operating Temperature 32°F – 104°F (0°C – 40°C)

Important Note

Do not place the watch under running water.
Do not submerge. Not suitable for showering, bathing or swimming.
Keep the cover closed when the watch is not in use.

WARNING
People with very sensitive skin may notice some irritation after wearing the Learning Pup Watch for extended periods of time. The skin may become irritated when moisture, sweat, soap, or other irritants get trapped under the wristband and are left in contact with the skin. To prevent this, we suggest children remove the watch before going to bed for the night, take the watch off if it’s feeling uncomfortable, and keep their wrist and the band clean and dry. In addition, wearing the watch too tightly may also cause irritation. Make sure the fit is good – tight enough so the watch stays in place but not so tight that it’s uncomfortable. If you notice any redness, swelling, or other irritation, you may want to consult a doctor before wearing the watch again.

GETTING STARTED

Battery Removal and Installation

Close the cover of the watch.
Find the battery cover located on the back of the unit, use a screwdriver to loosen the screw and then open the battery cover.
Remove the old battery by pulling up on one end of the battery.
Install one new CR2450 battery as illustrated.
Replace the battery cover and tighten the screw to secure.

WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.

Disposal of batteries and product

Disposal icon The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.

The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators Regulation.

The solid bar indicates that the product was placed on the market after 13th August, 2005.
Help protect the environment by disposing of your product or batteries responsibly.

VTech® cares for the planet.

Care for the environment and give your toy a second life by disposing of it at a small electricals collection point so all its materials can be recycled.

In the UK:
Visit www.recyclenow.com to see a list of collection points near you.

In Australia & New Zealand:
Check with your local council for kerbside collections.

IMPORTANT: BATTERY INFORMATION

Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES:

Remove rechargeable batteries from the toy before charging.
Rechargeable batteries are only to be charged under adult supervision.
Do not charge non-rechargeable batteries.

Symbol	Meaning

| Warning: Contains coin battery

| Read operator manual

WARNING:
This product contains one or more button cell or coin batteries. If swallowed, a button cell or coin battery can cause internal chemical burns in as little as two hours and can lead to death. Dispose of used batteries immediately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention, and go straight to the nearest hospital emergency department.

Australia/New Zealand
If you think batteries might have been swallowed or placed inside any part of the body, immediately call the 24-hour Poisons Information Centre on 13 11 26 (in Australia) or 24-hour National Poisons Centre on 0800 764 766 (in New Zealand) for fast, expert advice and go straight to the nearest hospital emergency room.

TO BEGIN USING

When you use the watch for the first time, you must unlock it from Try-Me mode to play. To unlock from Try-Me mode, open the Cover, and press the Left + Right + OK Buttons together for approximately five seconds. You will then hear three beeping sounds to indicate it has been unlocked. Press any button to activate the watch and set the time.

Press the Left or Right Buttons to select, then press the OK Button to confirm and move to the next option. A tick icon will be displayed when the setting is complete.

Note

When the battery level is low, most functions on the watch may not be activated, except for the clock display. It is recommended to install a new battery as soon as possible before further use.
If the battery level is too low and cannot keep the clock running, you will need to enter the time again after the battery has been replaced.

PRODUCT FEATURES

Cover

Open the Cover to view the time. When the Cover is closed, tap the bottom of the Cover to activate character voices and sounds with a light effect.

Left/Right Buttons

Use the Left and Right Buttons to select an activity or option, or to change options in time settings or alarm mode.

OK Button OK

Press the light-up OK Button to confirm a selection and move to the next option in different activities.

Clock/Home Button

Press the Clock/Home Button to return to the clock from any other function or activity.

Clock Display

When the Clock/Home Button is pressed, the time will be displayed. Press the Left or Right Buttons to display the Home Menu where other activities can be selected.

Press the Left or Right Buttons to display the Home Menu.
There are five activities to choose from:

Alarm Clock	Stopwatch	Timer
Games	Settings

Press the Left or Right Buttons to scroll through the menu options.
Press the OK Button to enter the chosen activity.

Alarm Clock

Press the Left or Right Buttons to select the time and choose between 10 alarm tones.
Press the OK Button to confirm and move to the next setting.
Press the Clock/Home Button to automatically save the current setting.

Stopwatch

Press the OK Button to start the Stopwatch, press again to stop.
When the Stopwatch is stopped, you can press the Left or Right Buttons to reset.

Timer

Press the Left or Right Buttons to change the time.
Press the OK Button to confirm.
Press the Clock/Home Button to automatically save the current setting.
When you press the OK Button to confirm the timer duration, the countdown will start immediately.
While the Timer is running, press the OK Button to pause/ resume or press the Left or Right Buttons to reset.

Settings

In the Settings menu, press the Left or Right Buttons to scroll through the various options:
10.1. Setting the Time

Press the Left or Right Buttons to change the options. (The AM/PM setting is only applicable in 12-hour time format)
Press the OK Button to confirm.
Press the Clock/Home Button to automatically save the current setting.

Clock Face

Press the Left or Right Buttons to select from 12 different clock faces.
Press the OK Button or Clock/Home Button to confirm and save the setting.

Chickadee Cuckoo Clock

Press the Left or Right Buttons to turn the Cuckoo Clock on or off.
Press the OK Button or Clock/Home Button to confirm and save the setting.
Please note that when the Cuckoo Clock is activated, the watch will chime at the top of each hour between 7 AM and 7 PM unless a game is currently in progress.

Automatic Shut-Off

To preserve battery life, the Learning Pup Watch will automatically shut off after approximately 30 seconds without input.
The unit can be turned on again by pressing any button or opening the cover.

Note: The Learning Pup Watch will not automatically power off when the Stopwatch is running.
The unit will automatically turn Off when the battery power is very low. If you see the Low Battery icon appear on screen, please replace the battery.

ACTIVITIES

Games

In the Games menu, press the Left or Right Buttons to scroll through the different progressive “Learning” game options:

Pups and the Badges

Ryder has mixed up all the pups’ badges and gadgets. Help Ryder find the correct badges and gadgets for each pup. Press the Left or Right Buttons to select and press the OK Button to confirm.

Pups First Aid

Jake has slipped on the snow-covered mountain slope and hurt himself. Help Marshall use his X-ray screen and EMT kit to take care of the injuries. Press the Left or Right Buttons to select and press the OK Button to confirm.
Pups First Aid

Pups Save the Animals

Farmer Yumi’s fence is broken and her animals have escaped. Follow the instructions to help Chase find the animals.
Press the Left or Right Buttons to select and press the OK Button to confirm.
Pups Save the Animals

Pups Temple Rescue

Mandy the monkey has swiped Ryder’s Pup Pad in the jungle and run into a mysterious temple. Solve some maths problems with Skye to open the door and find the Pup Pad. Press the Left or Right Buttons to select and press the OK Button to confirm.
Pups Temple Rescue

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries if the unit will not be in use for an extended period of time.
Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

Turn the unit Off.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit back On. The unit should now be ready to use again.
If the unit still does not work, install a new battery.

CONSUMER SERVICES

Creating and developing VTech products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.

UK Customers:
Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK)
Website: www.vtech.co.uk/support

Australian Customers:
Phone: 1800 862 155
Website: support.vtech.com.au

NZ Customers:
Phone: 0800 400 785
Website: support.vtech.com.au

PRODUCT WARRANTY/ CONSUMER GUARANTEES

UK Customers:
Read our complete warranty policy online at vtech.co.uk/warranty

Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED – CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.

Visit our website for more information about our products, downloads, resources and more.

http://www.vtech.co.uk/
http://www.vtech.com.au/