AUDIBAX Arizona 60 Arizona 60 Cabeza Movil LED Beam Wash 60W LED User Manual
- June 3, 2024
- AUDIBAX
Table of Contents
User Manual
Arizona 60 Arizona 60 Cabeza Movil LED Beam Wash 60W LED
Please read the manual before using the product Por favor, lea el manual antes de usar el producto Thanks for using our LED Stage Lighting Equipment. Before using, please read the instruction carefully. The instruction includes important installing and using information. Please use the fixtures following the instruction and keep the user manual properly. Our product use engineering plastic shell which is new, beautiful and can bear high temperature and high hardness metal body. Our product strictly follows the standard of CE and CCC to design and product. It’s conform to the international standard DMX512 signal protocol. It’s can be use alone or connect together. It’s have rotation fast, low noise and multifunctional as the product’s feature. It’s special for KTV, Dance hall, Night club, Bar and so on.
Safety Instruction
- Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet
- Unpack and check carefully there is no transportation damage before using the unit.
- Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit
- It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
- The unit is for indoor use only. Use only in a dry location
- The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked
- Disconnect main power before replacement or servicing.
- Make sure there is no flammable materials close to the unit while operating as it is fire hazard.
- Maximum ambient temperature is ta:40°C. Don’t operate it where the temperature is higher than this.
- Unit surface temperature may reach up to 85°C.Dont touch the housing bare-hand during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before replacing or serving.
- In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself.
Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type Spare parts.
Light Menu description
Addr | A001-A512 | 512 Address setting |
---|---|---|
CHnd | 14CH | 14 Channel setting |
12CH | 12 Channel setting | |
SLnd | Auto | Mainframe self-walking mode |
SL 1 | Control station mode | |
SL 2 | Auxiliary mode | |
SHnd | SH 0 | Effect 0 (recommended) |
SH 1 | Effect 1 | |
SH 2 | Effect 2 | |
SH 3 | Effect 3 | |
**Soud** | ON | Voice controlled open |
OFF | Voice control switch | |
SEnS | 0-99 | Voice-controlled sensitivity volume regulation |
LEd | OFF | Five seconds later, screen out. |
ON | The screen is always on | |
dISP | no | Display reverse |
YES | Display forward | |
rPAN | no | X motor forward rotation |
YES | X motor reversal | |
rTiL | no | Y-motor positive rotation |
YES | Y-motor inversion | |
REST | YES | system reset |
Channel Model Description 14channel mode
Channel | Function | Explain |
---|---|---|
1 | Horizontal operation | 0-255 |
2 | Horizontal fine-tuning | 0-255 |
3 | Vertical operation | 0-255 |
4 | Vertical fine-tuning | 0-255 |
5 | Horizontal and vertical speed | 0-255 |
6 | Dimming | 0-255 |
7 | Stroboflash | 0-255 |
--- | --- | --- |
8 | Red tone light | 0-255 |
9 | Green tone light | 0-255 |
10 | Blue tone light | 0-255 |
11 | White tone light | 0-255 |
12 | Color walking | 0-255 |
13 | No effect | 0-59 |
Self walking | 60-159 | |
Sound control | 160-255 | |
14 | Lamp belt control | 250-255 (5 second) |
12channel mode
CH | Function | Explain |
---|---|---|
1 | Horizontal operation | 0-255 |
2 | Vertical operation | 0-255 |
3 | Horizontal and vertical speed | 0-255 |
4 | Dimming | 0-255 |
5 | Stroboflash | 0-255 |
6 | Red tone light | 0-255 |
7 | Green tone light | 0-255 |
8 | Blue tone light | 0-255 |
9 | White tone light | 0-255 |
10 | Color walking | 0-255 |
11 | No effect | 0-59 |
Self walking | 60-159 | |
Sound control | 160-255 | |
12 | Lamp belt control | 250-255 (5 second) |
Technical parameters:
Voltage: AC100-240V,50-60HZ
Power: 80W
Light source: 1PCS 60W RGBW 4IN1
LED Channel: 12/14CH
Control model: sound activated, master slave, auto operation, DMX
X-axis: 540°
Y-axis: 270°