VigilLink VLMX-0202E 2×2 HDMI 2.0 Matrix 18Gbps User Manual

VigilLink VLMX-0202E 2×2 HDMI 2.0 Matrix 18Gbps

Introduction

The 18Gbps 2×2 HDMI Matrix switcher supports the transmission of video signals (up to 4K2K@50/60Hz YCbCr 4:4:4) from two HDMI sources to two HDMI displays simultaneously. This product supports audio extraction from output A to optical and analog output. It supports three modes of EDID setting (AUTO, COPY, and STD). Flexible control via panel buttons and IR remote; the corresponding LED indicator on the front panel will be illuminated.

Features

• HDCP2.2 / HDCP1.x, DVI 1.0 compliant.
• Supports 18Gbps video bandwidth
• Video resolution is up to 4K2K@50/60Hz (4:4:4).
• Supports digital and analog audio extract output from output A
• EDID can be selected with AUTO, COPY, and STD mode via the selector on the front panel.
• Supports analog audio PCM 2.0.
• Supported optical audio pass-through format: LPCM 2.0/2.1CH, Dolby 5.1, Dolby True HD, Dolby DD+, DTS 5.1, DTS-ES 6/DTS-HDMA 5.1, DTS HD-HRA 5.1.
• Supports HDR function
• Flexible control via panel buttons and IR remote.

Package Contents

1. 1× 2×2 HDMI Matrix Switcher
2. 1× 5V/1A Power Adapter
3. 1× Matrix IR Remote
4. 1× User Manual

Specifications

Technical

HDCP Compliance| HDCP 2.2 and HDCP 1.x
DVI Compliance| DVI 1.0
Video Bandwidth| 594MHz / 18Gbps
HDMI Video Resolution| Up to 4K2K@50/60Hz YCbCr 4:4:4
High Dynamic Range| HDR, HDR 10+, HLD, DOLBY VISION
Color Space| RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth| 8-bit, 10-bit, 12-bit
HDMI Audio Formats| PCM2.0/5.1/7.1CH, Dolby 5.1, DTS5.1, Dolby-TrueHD, DTS-HD
L/R Audio Formats| Analog stereo PCM 2.0
Optical Audio Formats| LPCM [2.0/2.1]CH, Dolby 5.1, Dolby True HD, Dolby DD+, DTS 5.1, DTS-ES 6, DTS-HDMA 5.1, DTS HD-HRA 5.1
ESD Protection| Human-body Model:

±8kV (Air-gap discharge) , ±4kV (Contact discharge)

Connection
Input ports| 2×HDMI Type A [19-pin female] 1×IR Receiver Window

Output ports

| 2×HDMI Type A [19-pin female] 1×L/R [3.5mm Stereo Mini-jack] 1×OPTICAL OUT [Optical jack]
Mechanical

Housing| Metal Enclosure
Color| Black
Dimensions| 144mm (W)×59.5mm (D)×18mm (H)
Weight| 208g
Power Supply| Input: AC100~240V 50/60Hz

Output: DC5V/1A (US/EU standard, CE/FCC/UL certified)

Power Consumption| 2.7W
Operating Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)

Operation Controls and Functions

Front Panel

1

| ****

POWER LED

| Power LED indicator.

Notice: The power LED illuminates red when the product is working or on standby.

2| OUTPUT A| Press the OUT A button to select 1 or 2 input sources; the corresponding LED indicator will illuminate in green.
3| OUTPUT B| Press the OUT B button to select 1 or 2 input sources; the corresponding LED indicator will be illuminated in green.

4

| ****

EDID AUTO/ COPY/STD

| ▪  AUTO: When the selector is dialed to the AUTO position, the product will compare OUT A and OUT B EDID settings and output the lowest resolution to source devices, then the source devices will send the signal to all

HDMI outputs.

4

| ****

EDID AUTO/ COPY/STD

| ▪  COPY: When the selector is dialed to the COPY position, the product will copy the EDID setting of the HDMI OUT A display device (If no HDMI OUT A capable EDID is detected, the product will copy HDMI OUT B) to the source devices, then the source devices will send the signal to all HDMI outputs.

▪  STD: When the selector is dialed to the STD position, the

source devices will send fixed 1080P/60Hz EDID to all HDMI outputs (audio for PCM 2.0 only).

5| IR| IR receiver window. It receives IR remote signal of this product only.

Rear Panel

an HDMI cable.
2| OUTPUT A / B| Connect to HDMI display device such as TV or monitor with an HDMI cable.

3

| AUDIO OUT (OPTICAL / L/R)| ▪  OPTICAL: Optical audio output port. Connect to the audio amplifier.

▪  L/R: Analog audio output port. Connect to the audio amplifier.

Notice: The audio output signal is from the OUTPUT A port.

4| DC 5V| Plug the 5V/1A DC power supply into the unit and connect the adapter to an AC outlet.

IR Remote

| Power on the product or set it to standby status.
---|---

OUTPUT A

| 1/2: Select input 1 or input 2 source signal to OUTPUT A port.

: Select circularly input 1 or input 2 source signal to OUTPUT A port.

OUTPUT B

| 1/2: Select input 1 or input 2 source signal to OUTPUT B port.

: Select circularly input 1 or input 2 source signal to OUTPUT B port.

Notice:

1. The power LED on the front panel will illuminate in red when the product is working or on standby.
2. The input source LED on the front panel will illuminate in blue when OUTPUT A or OUTPUT B is selected by an input source.

FAQ

Q: Does this product require an HDMI cable length for the connection interface?
A: According to HDMI input/output cable length test, the most extended HDMI cable for 4K2K@60Hz / 8 bit YCbCr 4:4:4 is 5m, the most extended HDMI cable for 4K2K@ 30Hz / 8-bit is 10m, the most extended HDMI cable for 1080p@60Hz / 8-bit is 15m.

The use of the “Premium High-Speed HDMI” cable is highly recommended. The best distance for using the IR remote is 0~7m, and the best angle is ± 45°.

Application Example

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>