VigilLink HBT-E70S 10.2Gbps HDBaseT Extender 70 Meters User Guide

VigilLink HBT-E70S 10.2Gbps HDBaseT Extender 70 Meters

Specifications:

• Frequency Bandwidth: 297MHz [10.2Gbps]
• Transmitter Input/Output: 1x HDMI Female port/1xCAT6 1x IR Tx/1x IR Rx/1xPhoenix
• Receiver Input/Output: 1x HDMI Female port/1xCAT6 Ports 1x IR Tx/1x IR Rx/1xPhoenix
• Power Supply: DC 24V 1A
• ESD Protection
• Dimensions (mm): 65(W) X 115 (D) X 17 (H)
• Weight: 200g x 2
• Relative Humidity: 20~90% RH (Non-condensing)
• Power Consumption: 20W (Max)

Product Usage Instructions

Introduction:
The Cat5e/Cat6 HDMI Extender is designed to extend your HDMI signal over 70 meters to a compatible display. It converts HDMI to HD BaseT signal for transmission over LAN cable. It supports bidirectional Infrared control signal along with HDMI signal.

Features:

• POC (Power Over Cable) function supported.
• Utilizes a single UTP LAN cable for transmission.
• Supports various display resolutions including 4K x 2K @30Hz.
• Transmits bidirectional infrared and RS232 control signals.

Package:

• HDMI Extender Transmitter
• HDMI Extender Receiver
• Wideband IR Tx & Rx
• 24V1A DC Power Supply
• Operation Manual
• Mounting ears (4PCS)

Operation Controls and Functions:
The transmitter features POWER LED for connection status, DC 24V port for power supply, and HD BaseT OUT port for signal output.

FAQ:

Q: What is the maximum transmission distance of the extender?
A: The extender can transmit up to 70 meters over CAT6 cable supporting various resolutions including 1080p and 4K.

Q: Does the extender support bidirectional control signals?
A: Yes, the extender supports bidirectional infrared and RS232 control signals alongside the HDMI signal.

Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shook, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

Caution
The extender using UTP termination, which follows the standard of direct interconnection method.

Advanced
The extender will start protection mode automatically when using UTP termination, which follows the standard of cross interconnection method.

Introduction

The cat5e/cat6 HDMI Extender is a tool which can extend your HDMI signal over 230fts/ 70meters to a compatible display. It is designed to convert HDMI signal to standard HD BaseT signal which can be transmitted by LAN cable. It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 230fts outside, also you can control the Sink in the Source side which is 230fts outside by using the HDMI Extender.

Features

• POC (Power Over Cable) function supported: Power either TX or RX with a 24V@1A power supply; the other end does not require power from the DC jack. POC power consumption is less than 10W.
• Utilize a single UTP LAN cable (CAT-5E/6) for long-distance HDMI transmission, following standard direct interconnection methods for UTP termination.
• Transmission distances over CAT6 cable:
• 70 meters: 1080P @60Hz 36bit; 3D 1080P @30Hz 36bit.
• 40 meters: 1080P @60Hz @48bit; 1080P @120Hz @24bit; 3D 1080P @60Hz @36bit; 4K x 2K @30Hz @24bit.
• Support display resolutions up to 4K x 2K @30Hz.
• Full HD support includes: 1080p @60Hz @48 bit/pixels, 1080p @120Hz @24 bit/pixels, 3D 1080P @60Hz, and 4K x 2K @30Hz @24bit.
• Transmit bidirectional infrared control signal alongside the HDMI signal (see description 2).
• Transmit bidirectional RS232 control signal alongside the HDMI signal (see description 3).

Package

1. HDMI Extender Transmitter…………………………….1PC
2. HDMI Extender Receiver…………………………………1PC
3. Wideband IR Tx……………………………………………..2PCS
4. Wideband IR Rx……………………………………………..2PCS
5. 24V1A DC Power Supply…………………………………1PC
6. Operation Manual………………………………………….1PC
7. Mounting ears ……………………………………………….4PCS

Specifications

Technical

Frequency Bandwidth| 297MHz[10.2Gbps]
Transmitter Input/Output| 1x HDMI Female port/1xCAT6 1x IR Tx/1x IR Rx/1xPhoenix
Receiver Input/Output Ports| 1xHDMI Female port/1xCAT6 1x IR Tx/1x IR Rx/1xPhoenix
Power Supply| DC 24V 1A
ESD Protection| Human Body Model: ± 8kV (air-gap discharge)

± 4kV (contact discharge)

Dimensions (mm)| 65(W) X 115 (D) X 17 (H)
Weight| 200g x 2
Operating Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (Non-condensing)
Power Consumption| 20W (Max)

Operation controls and Functions

Transmitter

1. POWER: This LED illuminates when the device is connected with power supply.
2. DC 24V: Plug the 24V DC power supply into the unit.
3. HD BaseT OUT: Standard HD BaseT signal output port. Connect HD BaseT receiver with a UTP cable following the standard of direct interconnection method.
4. HDMI IN: HDMI input port. This slot is where you connect the HDMI source.
5. IR IN: Channel 2 IR Receiver. Connect with Wideband IR Rx.
6. IR OUT: Channel 1 IR Transmitter. Connect with Wideband IR Tx.
7. RS232: Phoenix jack provide Serial port control signal from receiver or to receiver.
8. Connection Signal Indicator Lamp
   • Illuminate: The Transmitter and Receiver are in good connections status.
   • Flashing: The Transmitter and Receiver are in poor connections status.
   • Dark: The Transmitter and Receiver are not connected.
9. Data Signal Indicator Lamp
   • Illuminate: The HDMI signal with HDCP.
   • Flashing: The HDMI signal without HDCP.
   • Dark: No HDMI signal.

Receiver

1. POWER: This LED illuminates when the device is connected with power supply
2. DC 24V: Plug the 24V DC power supply into the unit.
3. HD BaseT IN: Standard HD BaseT signal input port. Connect HD BaseT transmitter with a UTP cable following the standard of direct interconnection method.
4. HDMI OUT: HDMI output port. This slot is where you connect the HDTV or monitor with HDMI cable.
5. IR IN: Channel 1 IR Receiver. Connect with Wideband IR Rx.
6. IR OUT: Channel 2 IR Transmitter. Connect with Wideband IR Tx.
7. RS232: Phoenix jack provide Serial port control signal from receiver or to receiver.
8. Connection Signal Indicator Lamp
   • Illuminate: The Transmitter and Receiver are in good connections status.
   • Flashing: The Transmitter and Receiver are in poor connections status.
   • Dark: The Transmitter and Receiver are not connected.
9. Data Signal Indicator Lamp
   • Illuminate: The HDMI signal with HDCP.
   • Flashing: The HDMI signal without HDCP.
   • Dark: No HDMI signal.

Description 1
POC(Power Over Cable) Application Example

Description 2
Bidirectional Infrared control Application Example

Description 3
Bidirectional RS232 control Application Example

Application Example

RS-232 Equipped PC or Notebook

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>