HAIZHIMEI HZM-P002-001 Intelligent Visual Dental Water Jet Instruction Manual
- June 4, 2024
- HAIZHIMEI
Table of Contents
[
](https://manuals.plus/wp-
content/uploads/2022/08/HAIZHIMEI.png)
HAIZHIMEI HZM-P002-001 Intelligent Visual Dental Water Jet
Read all instructions before using this product, and keep it for future reference.
Dangers Keep the charger away from water. Do not place or store it on or
near any container with water (such as a bathtub, washbasin, etc.). Do not
immerse the charger in water or other liquid. Make sure the charger is
completely dry before connecting to the power supply after cleaning.
Warning: Only use the attached inductive charger to charge the battery of
the product, and input voltage of the charging base is DC3.7-5.0V.
Mobile phone charger can be connected to the charging cable to provide
charging for the product
If any damage happens to the product (jet nozzle, handle and/or charger), do
not use it again.
This product has non-repairable parts. If any damage happens to the product,
please contact the customer service center in your country/region.
Do not use the charger outdoors or near high-temperature surfaces.
The product is not advised to be used by people (including children) who have
physical, sensory, or mental deficiencies or shortage of experience and
knowledge in use, unless they are closely instructed or supervised in the
proper use of this product.
Do not use for fun, s please pay attention to your child.
Warning: If you have recently undergone oral or gum surgery, suffered
persistent dental problems, received a lot of oral treatments in the past two
months, or encountered suspected oral treatments (dental fillings, corona,
etc.), please consult dentists before using this product.
If your gum bleeds heavily after using this product or still bleeds after 4
weeks of use, please consult your dentist.
If you have medical problems, please consult your doctor before using this
product.
This product meets safety standards for electromagnetic device. If you have
any questions about cardiac pacemaker or other implants, please consult
doctors or manufacturers of implants before using it.
Only use dental accessories recommended by the manufacturer
Do not apply excessive pressure to the nozzle tip.
To avoid injury, do not fill the reservoir with hot water.
Do not drop or insert any foreign object into the reservoir.
Only use this product for the intended purpose described in instructions.
To avoid injury, do not place the nozzle at a 45° angle to the gums.
Do not use dishwashers or microwave ovens, washing machines to clean the
nozzles, handles, and chargers of this product.
This product can only be used personally and cannot be used by dental clinics
or institutions for multiple patients.
Product Introduction
Thank you for using our product. This product is an intelligent visual dental
water jet, which realizes real-time guidance through connecting internet
applications, with low latency and high definition to meet your unknown
experience of oral care and improve your oral health. 
Charging
Charge the intelligent visual dental water jet for 8 hours before first use.
- Connect the charging base to the DC5V power supply at the output end of the mobile phone charger with a USB cable.
- Put the body into the charging base for inductive charging. (Picture.)
Charging Process: (Picture.)
Caution: When fully charged, the life of the intelligent visual dental water jet can be up to 30 days.
Preparations for Use
-
Use your mobile phone to scan the QR code and download the APP.
(Android4.0) (Supported by Android4.0; iOS9.0 or above system) -
The 2. opens the cell phone WLAN list and finds the same Wi-Fi name as the device name (such as the address at the beginning of the wlan-XXX or HZM-xxx), Click to link
-
Go to the operation interface, page 1 is the company profile, and page 2 is the product mall.
-
Slides left to page 3 “Start link” and click the immediate link! Complete wifi map link for device and phone.
-
Install the nozzle: press the nozzle down into the body and turn it to the right to lock it.
Warning: the nozzle hole faces forward! -
Insert the water pipe into the water inlet at the bottom of the body. (Fig.)
-
Fill the cup or bottle (finding the convenient tool near you) with water or mouth wash.
Tip: In order to get the best results and have a more comfortable experience, you are advised to use the intelligent visual dental water jet and mouthwash together.
Warning: do not use mouthwash with isopropyl tetradecanoate or essential oil in high concentration, and water at high temperature, otherwise your oral cavity may hurt or the product may be damaged. (For example, use mouthwash packaged other than plastics) -
Place the water inlet pipe with the gravity ball into the cup or bottle filled with water.
-
Press the OneClick to operate the power switch (Fig.)
Tip: Long press for two seconds to turn on/off the device, short press to switch modes.
Mode Introduction and Usage
- Make sure turn on the intelligent visual dental water floss. If closed, please press power for two seconds and release it to turn on the product.
- You can change the mode by tapping the switch.
Soft Mode
Provide water pressure about 30 psi to rinse the tooth stains/stains of
teeth or in gingival crevices, which is suitable for people who uses it for
the first time.
Pulse Mode
Provide pulsed water flow of 50-70psi to rinse the tooth stains/stains of
teeth or in gingival crevices, with a pause of 2 seconds for every 3 seconds
of rinsing. During the pause, it is convenient to use mobile phone video to
observe the place to be rinsed in the oral cavity and the effect of the
rinsing process, achieving the SPA effect of gums.
Standard Mode
Provide water flow of about 50-70 psi to rinse tooth stains/stains of teeth or
in gingival crevices.
Note: Default mode of the intelligent visual dental water jet is Soft
Mode (Soft), in order not to bother you with strong water pressure and for the
first-time user to adapt when putting it in the mouth.
When using, move the nozzle tip along the gum line to flush the surface and
slits between the teeth. Close the lips above the nozzle slightly to avoid
splashing liquid.
This product can also be used to wash the coating on the tongue, and with the
help of the visual function of this product, you can check the area washed and
the effect through the video of the mobile phone connected to WIFI.
FAQ
-
Gums bleeding when using
Solution: When using, avoid the water jet against the gumat at a angle of 45°, and place it perpendicularly to the teeth, or use a gentle gear to gradually adapt. These can effectively avoid the problem of gum bleeding. -
Too low water pressure
Solution: There may be a foreign object clogged in the nozzle or the nozzle orifice is crushed, please replace the nozzle. -
The project doesn’t run
Solution: For low battery after purchasing or not using for a long time, please charge it continuously for more than 3 hours to activate the battery. -
The nozzle does not spray water
Solution: Please check the remaining water level. This product has patented technology of built-in gravity ball, so it can work normally at any angle. -
There is no interface after mobile phone has been connected to the application.
Solution: Please check whether it is connected to the corresponding wireless network of the product. -
Does the product have a warranty?
Solution: Yes, this product promises to support one-year warranty for non-manmade quality problems, please rest assured to buy.
Product Parameters
**� t**
Name of Product
| ****
I n t e ll gent v u a l w a t er flo
| ****
Product Model
| HZM P
---|---|---|---
Working Environment Temperature| | Working Voltage| DC 3 V
Battery| 8 mAh| input voltage| DC V
Battery Life| 3About 30 days| interiorinput power| W
Charging Duration| 8h| Waterproofing Grade| IPX
A
Charging Way
| A
Inductive Charger
|
Executive Standard
| GB 6 / 9
Image Transmission Rate| 3 M| Camera Pixel| Jj m ll on
---|---|---|---
Network Standard| IEEE 8 /g/n
Product Dimension| 3 3 mm
Sales unit should assist the user to complete the following content
- Name of User:
- Date of Purchase:
- Contacts:
- Sales unit shall complete the following content:
- Product Model:
- Date of Production:
- Name of Sales Unit:
If it meets any one of the following conditions, the warranty would not cover. The company or its authorized service center will charge reasonable repair fees:
- Three guarantees have been expired
- Without valid invoice or warranty card has been altered;
- Damage due to failure to comply with the requirements of the instructions and maintenance;
- Damage due to immersing in water, smashing or burning;
- Abrasion of the product surface during use, except for shell cracks caused by product structure or material factors;
- Any damage caused by force majeure
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>