beca BAF-908 Smart Watering Device User Guide

beca BAF-908 Smart Watering Device

Welcome To Use BAF-908 Smart Watering Device

The new automatic watering device will start smart planning for you. Please read this installation/programming manual for comprehensive information. It is said about installation and operation.

Packaging Accessories

Product Parameter

• Product name: automatic watering device
• Material: ABS+PC
• Supply voltage: 5.0-6.0V
• Lithium battery capacity: 2600 mAh
• Pump water supply: 550mL/min
• Product size: 110 11040.5mm
• Product model: BAF-908
• Working environment: normal temperature
• Charging method: USB/solar charging
• Solar panel output power: 2W

Product Description

Based on modern water conservancy and microelectronics technology, using the most advanced international intelligent micro drip irrigation technology, it is automatically controlled by a powerful, flexible and diverse AC controller instead of manual watering. Set the microdropper and watering me based on plant aributes and flower pot size. Through the operation panel/APP/smart speaker and other control methods, mulple sets of switches can be set, watering me can be set arbitrarily, and mulple poed plants are automatically watered, and water slowly penetrates into the roots of plants through the fixed seat to ensure plants and flowers get the right amount of water and nutrients. The product is applied to culvate flowers, plants, bonsai and poed fruit trees, and is suitable for intelligent care of plants in homes, hotels, clubs, offices, etc.

Note

1. When using the device for the first me, press the main power switch on the side of the device to use the device normally.It is recommended that the USB 5V-1A power supply be fully charged before the first use;
2. When connecting to WiFi for the first me, it is recommended to set the system me as the local me. Then please refer to point 3 to connect to WiFi
3. Download the APP (Fig1-2/Fig1-3), and open the APP for pairing and networking.

For IOS devices, please search for Smartlife in the Apple Store and download or scan the IOS QR code (Fig 1-2) For Android devices, please search for Smartlife in Google Store and download or scan the Android QR code (Fig 1-3) In the power-off state, long press the” “ key for 8-10S until the WiFi icon flashes, add a device—the APP automatically searches for the device (confirm the mobile phone’s Bluetooth is turned on)—choose to add a device—enter the WiFi password —add successfully—enter the APP operation the interface for seng control (For detailed network distribution video, please scan the code and refer to the following QR code distribution network video)

Scan the QR code with your mobile phone to get the complete WIFI connection process.

• The device can be charged with a special solar panel, and the solar panel is an oponal accessory. If necessary, please contact the seller,If a third-party solar panel is used to charge the device, the damage is not covered by the warranty;
• Note: If the built-in battery is exhausted, it needs to be turned off and charged for more than 60 minutes before the WiFi function can be used normally.

Features

1. Fashion appearance
2. Double pump water supply
3. USB charging or solar charging, not restricted by area
4. With weather display/regional humidity
5. Programmed watering regularly and quantitively a week
6. According to different applications, it can be matched with different nozzles for drip irrigation and spray showers
7. WIFI/Voice and other control methods

Size: mm

Power main switch: Press the device to power up.

Installation diagram

1. Water pipe
2. Filter
3. Tee
4. Dropper head
5. Sprinkler head
6. Plug
7. Fixed seat
8. Pendant
9. Solar charging board（Optional）/USB

Notice:

1. The water pipe can be cut and assembled according to the user’s environment.
2. When using the solar charging panel, it needs about 3 hours of sunlight to effectively provide electricity

(For the detailed takeover installation video, please scan the code and refer to the above QR code to obtain) Scan the mobile phone to get the installation process of the watering device.

Equipment application

Home Screen Quick Reference

Operation

Power, Up, Down

Power, turn on and off up Down

Time setting
The Wifi version will automatically synchronize the time in the area when it is connected to the Internet, and there is no need to manually set the time. The time is synchronized every 1 hour.

Mode switching

programming mode manual mode Press “ “, the “ ” and ” ” icons on the screen flash, press “ ” to select manual mode “ “, and press” press “ ” to select programming mode” “.

Function settings are recommended on the APP. Please following below steps

1. In manual mode, press “ ” twice, the  ” icon flashes, press “ “/” ” to select “Pump A, Pump B, Pump A+B”.Press ” ” again to set the pump working time “B88, press ” “/” ” to set the value, and set ” ” in the same way.After finishing the time setting, Press the” “mode key again to enter the manual watering time interval” 88 h, press the” “/” “key to set the specific value, press” ” again, the screen icon will no longer flash, the pump will start to work, and the” “countdown icon will appear on the screen.
2. 5+1+1 programming mode setting.
   Continuously press the “ ” time key 4 times in the power-on state, the ” ” icon flashes,Press ” “/” ” to select ” Pump A, 1Pump B, Pump A+B”, press ” ” again to set the start time of the first period” ” from Monday to Friday, press ” “/” ” to set the time.Similarly, set “ 2 Period 2, 3 Period 3, Period 4″.In the same way, set Saturday (6) or Sunday (7)

Button lock

Press” ” and “ ” at the same time for 5 seconds to lock the button ” ” and unlock the button.

• When the device is off, press” ” for more than 8 seconds, the wifi icon on the device screen flashes, and the device is in wifi configuration mode. After the device is successfully connected to the network, the screen will display the current outdoor humidity ” 88sRH “, weather “ ‘and other weather displays.

Advanced options

When the WiFi network is off, press “ ” and at the same time for 2 seconds to turn on the advanced option mode.Click the “ “to switch the serial number, and click the “/ ” to set the value.

Simple exception resolution

Thank you for purchasing this product!
The new sprinkler will enjoy a 24-month warranty. Using this watering device will provide you with a convenie nt and quick gr een plant maintenance experience.If you need further assistance, please feel free to contact us.

This device complies with the following CE directives:

• 2004/108/EEC(ElectroMagnetic Compatibility)
• 2006/95/EEC(l0w voltage safety)

Due to changes in equipment and standards, the text and illustrations in this document are not binding unless confirmed by our company

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>