Beca BHT-002 Electric Heating Wifi Thermostat User Guide

Beca BHT-002 Electric Heating Wifi Thermostat

WHAT IN THE BOX

• Thermostat: 1pc
• User Guide: 1pc
• QC Passed: 1pc
• Screws: 2pc
• Floor Sensor (2.5m): 1pc (Floor sensor is Optional)

ABOUT YOUR THERMOSTATS
The BHT-002 series range has been developed to control electric underfloor, water heating or water/gas boiler systems. These units are designed for use in commercial, industrial, civil and domestic properties.

MODEL DEFINITION

• GA: Water heating, 5A GC: Water/Gas Boiler, 5A
• GB: Electric floor Heating, 16A
• L: Backlight
• P: Weekly Programmable
• W: Wifi
• N: Modbus Communication
• S2: Both internal sensor and floor external sensor
  For example: BHT-002 GCLP

FEATURES

On Appearance

1. The convenient operation creates convenient life.
2. Options of black and white housing.
3. Fashion design blends in with any decor.
4. Touch Screen display with backlight is easy to read,even in the dark.
5. Bright buttons always remind you the world truely exist.
6. Easy Ul interface could be used even by child.

On Functionality

1. Powerful functions are available such as Modbus/WIFI etc,
2. 0.5°C Accuracy keeps the temperature within the level you set.
3. Data memory when power is off.
4. 5+1+1 six periods programmable maximize comfort and economy.
5. Create a thermostat group to Centralized control
6. Integrate with Amazon Echo, Google Home, and Tmall Genie.
7. All setting languages synchronize your time zone, address and language.
8. No limit to adding rooms and supporting Smart Scene.

DIMENSION

TECHNICAL DATA

• Power Supply: 95 240 VAC, 50 60HZ
• Current Load: 5A (water heating/water boiler/gas boiler) 16A (electric heating)
• Sensor: NIC3950, 10K
• Accuracy: #0.5 C
• Set Temp. Range : 5-35C
• Dispaly Temp. Range: 5~99 C
• Ambient Temp.: 0 45 C
• Ambient Humidity: 5 ~ 95 % RH (Non Condensing)
• Storage Temp.: -5 45 C
• Power Consumption: <1.5W
• Timing Error: < 1%
• Shell Material: PC +ABS ( flame retardant)
• Installation Box: 86 * 86mm Square or European 60mm Round Box
• Wire Terminals: Wire 2 x 1.5 mm2 or 1x 2.5 mm2
• Protection Class: IP 20
• Buttons: Capacitive Touch Buttons

BEFORE WIRING AND INSTALLING.

1.  Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.
2.  Check the ratings given in the instructions and on the product to make sure the product is suitable for your application.
3.  Installer must be a trained, experienced service technician.
4.  After installation is complete, check out product operation as provided in these instructions

CAUTION: Electrical Shock or Equipment Damage Hazard. Can shock individuals or short equipment circuitry. Disconnect power supply before installation.

WIRING

Note:

• GA is for water heating
• GB is for electric heating;
• GC is for water/gas boiler;
• NTC and Modbus is optional.

INSTALLATION

Your thermostat is suitable for installation within a standard 86mm pattress box or a European 60mm pattress box.

1. Step 1. Keep power off. See Fig 1.
2. Step2. Slide the LCD assembly down to remove the mounting plate. See Fig 2.
3. Step 3. Connect the power supply, and load it into the appropriate terminals. (see “Wiring your thermostat” for details and Fig 3).
4. Step 4. Fix the mounting plate into the wall with screws in the box. See Fig 4,
5. Step 5. Fasten the body of the thermostat and the mounting plate by rotating. See Fig 5.
6. Step 6. Installation complete. see Fig 6.

HOME SCREEN QUICK REFERENCE

OPERATION

During Power On

1.  Power On/off: Press O to turn the thermostat on.

2. Manual & Programmable
   Touch (mode) to change between manual mode and program mode. In the manual mode, will display in the bottom of the screen In programmable mode, the period icon will show in the left side.

3. Setting Temperature
   In the mode of programmable, set temperature, time could not be adjusted. If the user want to change, please go to manual mode or programmable se ting. In the mode of manual, press to set the desired temperature.

4. Adjusting/Setting the Clock
   Touch the icon set minute, hour and weekday (1 = Monday, 2 Tuesday etc.) by using the Arrows. Press once more to confirm and exit.

5. Locking your Thermostat
   Press and hold the for 5 seconds to lock/unlock your thermostat item 3 of high senior options, you can select full lock or half lock.

6. Adjusting/setting the Program Schedules
   When a Wi-Fi connection is made, your thermostat will automatically accept the program schedule made via the APP on your device (see below for detailed instructions) To set the program schedules through your thermostat (NOT via your smartphone/tablet) simply follow theinstructions as below:

Please note: Setting the program schedule through your thermostat in only be carried out if there is no Wi-Fi connection between your thermostat and smartphone/tablet.

Touch to change between manual mode and programme mode. In the manual mode, will display in the bottom of the screen In programmable mode, touch and hold the icon until the weekday schedule settings appear (1 23 45 will show along the left of the screen). Use the arrows to adjust the on time. Press the icon and use the and arrows to set the time (1st period).Press again and use arrows to set the temp. Press the icon and use the arrows to set the time and temp. (2nd period).Repeat this process for periods 3 4 and 5 6. Press the icon once more to enter the Saturday schedule settings (6 will show along thee left of the screen). Repeat the above process to set the period and temp. and Sunday schedule. Press once more to confirm and exit.

Default settings for program schedule

Checking the Temperature of Floor Sensor
Press and hold the arrow for 5 seconds to display the temp. of floor sensor.

Setting the Functions and Options During Power Off

When power is off, press and hold and at the same time for 5 sec. in order to reach system function. Then press to scroll through the available functions, and use the arrows to change the available options. All settings are confirmed automatically.

ABOUT WIFI

WI-FI CONNECTION
Before using your Wi-Fi thermostat for the first time,you must configure the Wi-Fi signal and settings through your smartphone or tablet,This will allow communication between your connected devices.

Step 1 Download your APP (Fig-1)
Search for “Smartlife” in Apple Store or Google Play or use a browser to scan the QR code above (Figure 1-2), and complete account registration and installation according to the guidance of the APP.

Step 2. Connect the thermostat
Check the tutorial below to complete the connection and setup.

• Method 1: Scan the QR code to configure the network guide (Fig 2.1-Fig 2.3)
• Method 2: Ordinary distribution network guidance (Fig. 2. 1&Fig. 2.3.1)

Network distribution mode:

1. EZ Mode
   When the thermostat is off, press and hold the” “until the thermostat screen flashes quickly and displays the” “icon, and then operate according to the following figure (Fig 2.4-Fig 2.7).

2. AP Mode
   When the thermostat is off, press and hold the” “until the thermostat screen flashes slowly and the ” “icon is displayed (if the “ “icon appears, continue to press the ” ” until the thermostat screen Flashes slowly and displays the” ” icon), and then operate according to the following figure (Fig 2.8-Fig 2.14 ).

APP operation interface description (heating thermostat))

More settings

SIMPLE EXCEPTION HANDLING

SERVICE
Your thermostat carries an 24 months warranty from date of purchase. Service outwith the warranty period may incur a charge. More detail please contact with us directly.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>