EAR TECHNOLOGY DryBoost UV Rechargeable Hearing Aids User Guide

: June 3, 2024
: EAR TECHNOLOGY

Table of Contents

EAR TECHNOLOGY DryBoost UV Rechargeable Hearing Aids
IMPORTANT SAFETY INFORMATION
Package Contents
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EAR TECHNOLOGY DryBoost UV Rechargeable Hearing Aids

IMPORTANT SAFETY INFORMATION

This product is for household use. When using electrical products, especially when children are present, basic safety precautions should always be followed, including:
DANGER–To reduce the risk of electrocution:

Do not use while bathing.
Do not place or store product where it can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquid
Do not reach for this device if it has fallen into water.

WARNING –To reduce the risk of burns, electrocution, ﬁ re, or injury to persons:

NEVER look at the UV-C light when it’s on. Looking at the UV-C light with the naked eye may cause severe burns to the eye.
Closely supervise use by, on or near children or invalids.
Use this product only for its intended use as described in this guide.
Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return it to the place of purchase or service center for examination and repair.
Never place the product on a soft surface such as a bed. Keep any air openings free of lint, hair, and the like.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
The AC adapter included with your unit is made
specifically for this product. Do not use it with another appliance, and do not use an adapter from any other electrical device in its place.

NOTE: This product is not designed to diagnose, prevent, monitor, treat, or alleviate disease.

OPERATING CONDITIONS
At an ambient temperature of 70°F (21°C) the operating temperature of this appliance is 80-85°F (26-29°C).
UV-C lamp will shut oﬀ if lid is opened during the sanitizing cycle. The lamp also shuts oﬀ at the end of the 5 minute cycle time.

WARRANTY SERVICE (OUTSIDE NORTH AMERICA)
Contact the place of business where you obtained your drying unit.

Package Contents

Plug the power plug into an electrical outlet.
Plug the other end into the Type-C USB port on DryBoost UV.
Thread your base charging cable through the opening in the back of DryBoost UV.
Place your charging base onto the tray, and plug your charging cable into your charging base.
Add your instruments to the charging base. Position the charging base so the tips and tubes receive maximum exposure from the UV-C lamp.
Plug in the USB Type-A end of the charging cable into the back of DryBoost UV.
Close the lid and touch the power button.

NOTE Interrupt the cycle at any time by lifting the lid. The cycle will not restart once the lid is closed. Touch the power button for one second to restart the cycle.