ITC 69923S Compass View or Bella Reading Light Instruction Manual
- June 3, 2024
- ITC
Table of Contents
INSTALLATION INSTRUCTIONS
Compass™ Reading Light
Part#: 69923S & 69924S
PARTS/TOOLS NEEDED:
| | |
---|---|---|---
View or Bella Reading Light| Mounting Screws (Qty: 2)| Butt Splice Connectors
(Not Provided)| Power Drill
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
1. Determine the installation location and use the bezel to mark and drill
screw holes and wiring hole.| 2. Using the wiring diagrams below, wire the
light to the incoming 12V DC power. Test the light.| 3. Feed the wires back
through the hole and screw the light down.
---|---|---
| | | |
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit
www.itc-us.com/warranty-return-policy
Rev A •11/22/22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>