Inf iRay E3 Plus Series Thermal Imaging Monocular User Guide

Inf iRay E3 Plus Series Thermal Imaging Monocular

• Please read this guide before using the product, and keep the guide for future reference.
• For detailed information about the device, please download the complete user manual from the official website ( www.infirayoutdoor.com).

Components and Controls

1. Eyeshade
2. Diopter adjustment
3. Controller
4. Camera button
5. Magnetic charge port
6. Power indicator
7. Lens focus ring
8. Objective lens
9. Lens Cover

Button Operations

Getting Started

• Open the lens cap (9), and the startup LOGO will be displayed on the device screen in 1 second.
• When an infrared image is displayed in the eyepiece, the thermal imaging monocular enters the operating status.
• Rotate the diopter adjustment (2) to adjust the resolution of the icon on the display. The diopter adjustment is used to adjust the eyepiece diopter for users with different degrees of myopia.
• Photo/video recording: On the home screen, briefly press the Camera button (4) to start/stop a video recording. And long press the Camera button (4) to take a photo.
• Shortcut menu: When the home screen is displayed, press the Controller (3) to open the shortcut menu, and set the image mode ( ), scene mode ( ), screen brightness ( ). and image sharpness ( ). Rotate the Controller (3) to switch between different functions on the shortcut menu, and press the Controller (3) to set parameters.
• Main menu: When the home screen is displayed, press and hold the Controller (3) to go to the main menu page for more functions. Rotate the Controller (3) to switch between different functions on the main menu, and press the

Controller (3) to select the option.

• Power off: After using the device, close the lens cap (9), and the shutdown screen will be displayed in 3s. During the shutdown countdown, rotate the Controller (3) or reopen the lens cop (9) to stop it.
• Standby: Close the lens cap (9). During the shutdown countdown, press the Camera button (4) to enable the standby mode. If there is no operation performed for 30 minutes, the product will automatically shut down.

Charging

• The Eye ll series is supplied with a built-in rechargeable Li-ion battery pack, which allows operation up to 8 hours. When using the device for the first time, please fully charge it first. Eye series features a magnetic charge design.
• Connect the magnetic end of the data cable (10) to the magnetic port (5) of the device.
• Connect the Type-A port of the data cable (10) to the power adapter (11).
• Insert the plug of the adapter to the 110-24OV socket (12).
• When the device is charging, the power indicator (6) next to the magnetic port (5) is red. The power indicator (6) is on only in the charging status. When the power indicator (6) turns green, the device is fully charged.
• When charging, a lighting icon will appear inside the battery icon on the display. The lighting icon will not disappear until the data cable (10) is removed or the power is Cut off.
• During use, when the battery icon turns red D, this means the power level is low, please charge the device in time to avoid data loss.

Specifications

• The actual operation time depends on the intensity of Wi-Fi use, photography, and video recording.
• Improvements may be made to the design and software of this product to enhance its useful features.
• If there is any change to the technical specifications of the product, it will be made without prior notice to the customer.

Update and InfiRay Outdoor

• In order to continuously improve product performance and provide a better user experience, the software program, as well as the parameters of the device will be constantly updated. Users can go to the official website ( www.infirayoutdoor.com) to download and update.
• The Eye ll series support InfiRay Outdoor app technology, which can transmit the image via Wi-Fi from your scope to a martphone or tablet and update the program.
• Download and install the Liferay Outdoor app from the official website ( www.infirayoutdoor.com) and app store, or scan the QR code below to download directly.

Important Safety Information

Environmental influences

• Never point the lens of the device directly at intense heat Sources such as the sun or laser equipment. The objective lens and eyepiece can function as a burning glass and damage the interior components.
• Avoid touching the metal surface (cooling fins) after exposure to sunlight or cold.

Ergonomics notes

• Take breaks after long periods of use to avoid wrist pain.

Risk of swallowing

• Do not place this device in the hands of small children.
• Incorrect handling can cause small parts to come to loose which may be swallowed.

Safety instructions for use

• Handle the device with care: rough handling can damage the internal battery.
• Do not expose the device to fire or high temperatures.
• Install the batteries correctly according to the instruction on the device. Reverse connection is prohibited.
• lf the device has been damaged, send the device to our after-sales service for repair.
• User information on the disposal of electrical and electronic devices (private households) 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see www.recyclethis.info.

Intended use

• The device is intended for displaying heat signatures during nature observation, remote hunting observations and for civil use. This device is not a toy for children.
• Use the device only as described in this operating manual. The manufacturer and the dealer accept no liability for damages which arise due to non-intended or incorrect use.

Function test

• Before use, please ensure that your device has no visible damage.
• Test to see if the device displays a clear, undisturbed image.
• Check that the settings for the device are correct.

Installing/removing the battery

• The Eye ll series thermal imaging monocular is equipped with a battery pack. It can not be removed.

Legal and Regulatory Information

• Wireless transmitter module frequency range:

WLAN: 2.412-2.472GHz (For EU)

• Wireless transmitter module power<20dBm (only for EU)
• Iray Technology Co., Ltd. thus declares that the Eye Ill series thermal imaging monocular complies with the directives 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity as well as additional information are available at: www.infirayoutdoor.com.
• This device may be operated in all member states of the EU.

Regulatory information USA

• FCC ID: 2AYGT-2K-00

Labeling requirements

FCC

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  Information to the user

• Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

• Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

• The FCC Statement of Exposure to RF and the SAR limit for the United States (FCC) Is 1.5 WIkg average for each gram of tissue. Thermal Monocular has also been tested with Omm against this SAR limit.

• Manufacturer’s Name: IRay Technology Co., Ltd.

• Product Name: Thermal Monocular

• Trade Mark: InfiRay

• Model number: E3 Max, E3 Plus,E6+, E6Pro

• This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. The device complies with RF specifications when the device used at 5mm from your body. The product shall only be connected to a USB interface of version USB2.0

RF Specification:

Function

| Operation Frequency| Max RF output

power:

|

Limit

---|---|---|---
WIFI 2.4G| 802.11b/g/n(20MHz): 2412~2472MHz| 13.76 dBm| 20 dBm.

• This product can be used across EU member states.
• Manufacturer’s Name: IRay Technology Co., Ltd.
• Product Name: Thermal Monocular
• Trade Mark: I nfiRay
• Model number : E3 Max, E3 Plus,E6+, E6Pro
• This device in compliance with the essential requirements and other relevant provisions of UK Radio Equipment Regulations (SI 2017/1206). All essential radio test suites have been carried out. The product shall only be connected to a USB interface of version USB2.0

RF Specification:

Function| Operation Frequency| Max RF output

power:

| Limit
---|---|---|---
WIFI 2.4G| 802.11b/g/n(20MHz): 2412~2472MHz| 13.76 dBm| 20 dBm.

Declaration of Conformity (DoC)

• We, IRay Technology C0., Ltd.
• GUIYANG STREET, YANTAI ECONOMY AND TECHNOLOGY DEVELOPMENT DISTRICT, YANTAI SHANDONG P.R.CHINA
• Declare that the DoC is issued under our sole responsibility and belongs to the following products):
• Product Typ: Ray technology co., Ltd.
• Trademarks: InfiRay
• Model member(s): E3 Max,E3 Plus, E6, E6Pro

(Name of product, type or model, batch or serial number system composer

• Adapter: Model: Lx18AA- 120300-ZX

• Input: 100-240, 50/60Hz,0.7A

• Output: 5.0V- 3Aor 9.0V

• Or 12.0V 15A

• Battery: Model: JQ033-26L

• Specification: 3.5 V, 4.2 An, 15.12 Wh

• Manufacturer: Jinqu new energy (Zhejiang) Co., Ltd Nntennd wiFI2.4G antenna : FPC Antenna Antenna Gain: 3dBi ponents

• Hard Ware version: Vi.0

• Software version:

• The object of the declaration described above is in conformity with the essential requirements of the relevant Union harmonization legislation: Radio Equipment Directive RED (2014/53EU).

• The following harmonized standards and technical specifications have been applied:

• HEALTH & SAFETY (Art. 1aE

• EN 62368-12014+A112017

• EN S06662017 EN 02a02010, EN D a0

• EMC . a(190b)E3/201

• EN S8OP-30ena nsn _

• EN 56036.2017+A112020o

• EN ECO000-3-22019

• EN 61000-3-32013+A1:2019

• ETSI EN 300 328 V2.2.2 (2019-07)

• Modified Body Involved:

• Notified Bor

• EuOs E a Eeonc 1eng NA InC

• Noied ody Nu

• Actwity Parfonmed

• The technical file held by. IRay Technology Co., Ltd. GUYANG STREET, YANTAI ECONOMY, AND TECHNOLOGY DEVELOPMENT DISTRICT, YANTAI SHANDONG P.R.CHINA Signed for and on behalf of IRay Technology Co., Ltd.

• IRay Technology Co., Ltd.
  

• Add.: 11th Guiyang Street, YEDA, Yantai 264006, P.R. China
  

• Tel: 0086-400-998-3088
  

• Web:www.infirayoutdoor.com
  

• Email:infirayoutdoor@infiray.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>