CRIMSON A42M Full Motion Articulating Wall Mount Instruction Manual

Instruction Manual Full Motion Articulating Wall Mount
For 13”-49” TV’s / Weight Capacity: 80 lbs
A42M

A42M Full Motion Articulating Wall Mount

WARNING!
WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER INSTALLATION OR ASSEMBLY.
READ THE FOLLOWING WARNINGS BEFORE BEGINNING.
Do not use this product for any purpose not explicitly specified by Crimson AV. Improper installation may cause property damage or personal injury.
If you do not understand these directions, or have doubts about the safety of the installation, contact Crimson AV Customer Service or call a qualified contractor.
Crimson AV is not liable for damage or injury caused by incorrect mounting, assembly, or use.
The hardware provided with this product, is exclusively intended for installation on walls made of solid wood, concrete, cinder block or solid wood columns with a maximum of 5/8” of drywall.
For walls made of other materials, for example hollow bricks, please consult your installer and/ or specialist supplier.
DO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT

WEIGHT CAPACITY

Maximum Weight Capacity

TOOLS REQUIRED

Wood bit 4mm – 5/32”. Masonary bit 10mm – 3/8”.
Hammer if necessary

PACKAGE CONTENTS

INSTALL INSTRUCTIONS

1. 1a-1 WOOD STUD INSTALLATION
   Using stud finder locate center of stud.1a-2 WOOD STUD INSTALLATION
   Using level draw a vertical line at stud center.
   WARNING!
   Install only to wood studs or wood joists that are a minimum of 2”x4”, the wall or ceiling where the mount is being attached may have a maximum drywall thickness of 5/8”. Periodi-cally check and re-tighten any loose fasteners or bolts on mount.
   1a-3 Use wall plate (C) to mark hole location on center line.
   WOOD STUD INSTALLATION1a-4 WOOD STUD INSTALLATION
   Use a 4mm – 5/32” wood bit to make a 65mm – 2.5” hole on marks.1b-1 Use level to make a line on wall.
   CINDER BLOCK & CONCRETE INSTALLATION WARNING!
   Mounts are designed to be installed to a concrete wall with a minimum thickness of 8” and minimum density of 2000psi and 8”x8”x16” cinder block which meets ASTM C-90 specifications.
   Do not drill into mortar joints. Do not install to a concrete wall or cinder block that has any type drywall or other finishing.
   1b-2 CINDER BLOCK & CONCRETE INSTALLATION
   Use wall plate (C) to mark hole location on line. 1b-3 CINDER BLOCK & CONCRETE INSTALLATION
   Use 10 mm-3/8“ drill bit to drill 65mm – 2.5” holes on marks.1b-4 CINDER BLOCK & CONCRETE INSTALLATION
   Insert (B) into holes. Use a hammer to tap in if necessary.

2. INSTALL WALL PLATE
   Fasten wall plate to wall using screw (A).

3. ATTACH MOUNT PLATE
   Align mount plate (D) to holes on back of TV. Fasten mount plate useing supplied screws (K-M) with screwdriver. Use spacer (I) between mount and tv if needed. If screw bottoms out use washers (not included) to eliminate slack.

4. HANG TVHook TV on to adapter plate. Secure bracket to adapter plate with M5 x 10mm securing screws (Q) and washers (R and S).

5. SECURE AND LEVEL TV

WARRANTY

Congratulations on the purchase of this Crimson product! The product you now have in your possession is made of durable materials and is based on a design, every
detail of which has been meticu-lously thought-out. That is why Crimson AV LLC products are covered by a 10-year warranty against defects in materials or manufacturing.
Crimson AV LLC disclaims any liability for modifications, improper installations, or installations over the specified weight range. To the maximum extent permitted by law, Crimson AV LLC disclaims any other warranties, expressed or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Crimson AV LLC will not be liable for any damages arising out of the use of, or inability to use, Crimson AV LLC products. Crimson AV LLC bears no responsibility for incidental or consequential damages. This includes, but is not limited to, any labor charges for the repair of Crimson AV LLC products performed by anyone other than Crimson AV LLC.
Specifications are subject to change without prior notice.
WARRANTY CONTINUED
NOTICE TO CUSTOMERS OUTSIDE THE UNITED STATES: CRIMSON PRODUCT WARRANTY APPLIES ONLY TO PRODUCTS PURCHASED IN THE UNITED STATES. FOR PURCHASES OUTSIDE OF THE UNITED STATES, PLEASE CONTACT YOUR COUNTRIES DISTRIBUTOR FOR COUNTRY SPECIFIC WARRANTY INFORMATION.

© 2010 Crimson AV LLC. All rights reserved.
Crimson is a Crimson AV LLC brand. Crimson
and Crimson AV Mounting Solutions logos are
trademarks of Crimson AV LLC.
A42M-0001
Crimson AV LLC
512 Lndberg Ln.
Northbrook, IL 60062
www.crimsonav.com
support@crimsonav.com

References

• Home page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>