ViewSonic LCD-WPD-001-TX Wi-Fi Display Transmitter User Guide

: September 10, 2024
: Viewsonic

Table of Contents

LCD-WPD-001-TX Wi-Fi Display Transmitter
Product Information
Specifications
Product Usage Instructions
Making Connections
Wi-Fi Display
Re-Pairing the Transmitter
Updating Firmware
- FAQ
Q: What should I do if something is missing or damaged in the

LCD-WPD-001-TX Wi-Fi Display Transmitter

“`html

Product Information

Specifications

Model: VS19948 P/N: LCD-WPD-001-TX
Transmitter Input: USB Type C
Re-Pair Button: Yes
LED Indicator: Yes

Product Usage Instructions

Making Connections

Connecting the Transmitter:

Connect the Transmitter’s USB Type C Input to a USB Type C port
of the casting device (e.g., laptop, mobile phone, tablet).
Once connected, the Transmitter’s LED Indicator will flash for
a few seconds then…

Wi-Fi Display

To use Wi-Fi Display:

Open the OSD Menu and Select WiFi Re-Pair.
Connect the Laptop to the Monitor.
Updating the Receiver Firmware.

Re-Pairing the Transmitter

To re-pair the transmitter:

Using a paper clip or SIM-eject tool, press and hold the
Re-Pair Button for five seconds.

Updating Firmware

To update the firmware:

For Receiver Firmware: Open the OSD Menu and Select WiFi
Re-Pair. Connect the Laptop to the Monitor. Update the Receiver
Firmware.
For Transmitter Firmware: Refer to Appendix section for
detailed instructions.

FAQ

Q: What should I do if something is missing or damaged in the

package?

A: If anything is missing or damaged, please contact your local
reseller for more information.

“`

LCD-WPD-001-TX
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box of our website.
Model No. VS19948 P/N: LCD-WPD-001-TX

Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Once again, thank you for choosing ViewSonic®!
2

Contents
Introduction ………………………………………………………. 4
Package Contents ………………………………………………………………………………………4 Product Overview ………………………………………………………………………………………5
Transmitter……………………………………………………………………………………………….. 5
Making Connections……………………………………………. 6
Connecting the Transmitter…………………………………………………………………………6 Wi-Fi Display……………………………………………………………………………………………… 7
Re-Pairing the Transmitter ………………………………………………………………………….8
Updating the Receiver Firmware …………………………… 9
Open the OSD Menu and Select WiFi Re-Pair…………………………………………………9 Connect the Laptop to the Monitor ……………………………………………………………10 Updating the Receiver Firmware………………………………………………………………..12
Updating the Transmitter Firmware …………………….. 14 Appendix…………………………………………………………. 17
Specifications…………………………………………………………………………………………..17 LED Indicator …………………………………………………………………………………………..18
Transmitter……………………………………………………………………………………………… 18
Regulatory and Service Information …………………….. 19
Compliance Information……………………………………………………………………………19 FCC Compliance Statement……………………………………………………………………….. 19 Industry Canada Statement……………………………………………………………………….. 19 FCC Radiation Exposure Statement…………………………………………………………….. 20 IC Radiation Exposure Statement……………………………………………………………….. 20 CE Conformity for European Countries ……………………………………………………….. 20 Declaration of RoHS2 Compliance………………………………………………………………. 21 Indian Restriction of Hazardous Substances ………………………………………………… 22 Product Disposal at End of Product Life ………………………………………………………. 22
Copyright Information ………………………………………………………………………………23 Customer Service …………………………………………………………………………………….. 24
3

Introduction
Package Contents
Transmitter
NOTE:If anything is missing or damaged, please contact your local reseller for more information.
4

Product Overview
Transmitter

1 3

2

Number 1
2 3

Item USB Type C1 Input
Re-Pair Button LED Indicator

Description
Display input; connect to the casting device (e.g., laptop, mobile phone, tablet).
Using a paper clip or SIM-eject tool, press and hold for five seconds to re- pair the device.
Indicates the power and connection status.

1- Compatible with USB Type C. Ensure your device supports video output and power delivery via a USB Type C port (DisplayPort Alternative Mode on USB Type C).
5

Making Connections
Connecting the Transmitter
USB C
TX 1. Connect the Transmitter’s USB Type C Input to a USB Type C port of the casting
device (e.g. laptop, mobile phone, tablet). 2. Once connected, the Transmitter’s LED Indicator will flash for a few seconds then
stop. At this time, the casting device’s screen will cast automatically. NOTE:
· Ensure your device supports video output and power delivery via a USB Type C port (DisplayPort Alternative Mode on USB Type C).
· Casting is supported for all laptops, including those running Windows and macOS, as well as Android and Apple devices with DP Alt output.
· Duplicate and Extend mode for Windows/macOS systems are supported. · Genuine HDCP (High-bandwidth Digital Content Protection) for DRM
(Digital Rights Management) streaming is supported.
6

Wi-Fi Display Direct Wireless Cast 3. Connect the Wi-Fi TX Dongle to your external device. 4. Turn on the VG1656N by pressing the Power Button. 5. Press Up or Down to open the On-Screen Display (OSD) Menu. 6. Press Up or Down to select WiFi Display. Then press the Power Button. 7. The VG1656N can now directly wirelessly cast its screen.
or
Type C
TX
or
USB Type C Signal Input 1. Connect the Wi-Fi TX Dongle to your external device. 2. On the monitor, press the Power Button to open the On-Screen Display (OSD)
Menu. 3. Press Up or Down to select Input Select. Then press the Power Button
to enter the menu. 4. Press Up or Down to select WiFi Display. Then press the Power Button.
NOTE:Make sure your device is equipped with a USB Type C port that supports DisplayPort Alternate Mode for video output and power delivery capabilities.
7

Re-Pairing the Transmitter
NOTE:Re-pairing is only required when the user’s TX dongle is not the original TX dongle.
1. Connect the Transmitter’s USB Type C Input to a USB Type C port of the casting device (e.g. laptop, mobile phone, tablet).

USB C
TX

2. While the screen image displays, “Ready to Pair”, use a paper clip or SIM- eject too to press and hold the Re-Pair button on the Transmitter for five seconds. Once paired, casting will start automatically.
SSID: XXXXXXXXX PSK: XXXXXXXXX
TX

Device

TX

Ready to pair

5

8

Updating the Receiver Firmware
Open the OSD Menu and Select WiFi Re-Pair
1. Press the Power button on the right side of the VG1656N monitor to open the On-Screen Display (OSD) menu.
2. In the OSD menu, select Input Select then WiFi Re-Pair. NOTE:Do not connect the TX dongle to the laptop at this time.
9

Connect the Laptop to the Monitor

1. After selecting WiFi Re-Pair, the VG1656N will display the below screen.

SSID: XXXXXXXXX

PSK: XXXXXXXXX

Device

TX

5

sec

Ready to pair

Make note of the SSID and PSK numbers located at the top of the screen.

SSID: XXXXXXXXX

PSK: XXXXXXXXX

NOTE:Each VG1656N monitor has its own SSID and PSK number. 2. Go to the laptop’s network settings and select the VG1656N’s SSID. Then enter
the VG1656N’s PSK number to wirelessly connect to the VG1656N.
VG1656N’s SSID Number
Enter the network security key
VG1656N’s PSK Number
Home
Network_Office
Neighbor123

10

3. After the laptop successfully connects to the VG1656N monitor, the VG1656N screen will show the below connection screen.

Device

TX

WiFi Display

Connecting to the device

11

Updating the Receiver Firmware
1. On the laptop, open a web browser and enter 192.168.203.1 in the address bar to access the Settings page.

2. On the Settings page, click on Internet and connect to a local wireless network.
Setting

Internet

not connect!

WIFI Password

59274042

Display mode

100%

Wireless Channel Language Upgrade

Auto not connect!

Upgrade for transmitter Reset to default

Reboot

3. On the VG1656N’s screen, in the upper-right corner, will be the server connection status. If a red cloud is present, it means that a firmware update is available.

SSID: XXXXXXXXX

Device

TX

WiFi Display

Connecting to the device
12

4. On the laptop, if a firmware update is available the system will notify you. Click OK to update the firmware.
Local Version:
22136001
Server Version:
22495012
OK Cancel
5. After clicking OK, the firmware update will begin. On the VG1656N’s screen a progress bar will be displayed.
Download: 80%
NOTE:During the update process, please ensure that the power remains on and that the devices stay connected.
6. The VG1656N will restart and return to its initial screen after the update process is complete. The firmware update for the WiFi receiver of the VG1656N has now been completed.
13

Updating the Transmitter Firmware
· Before updating the firmware, please insert the TX dongle into the laptop. NOTE:Ensure the laptop supports video output and power delivery via USB Type C (DisplayPort Alternate Mode).
USB C
TX
· Connect the laptop to the VG1656N monitor by following the steps on pages 6~8.
1. On the laptop, open a web browser and enter 192.168.203.1 in the address bar to access the Settings page.

2. On the Settings page, click on Internet and connect to a local wireless network.
Setting

Internet

not connect!

WIFI Password

59274042

Display mode

100%

Wireless Channel

Language

Auto

Upgrade

not connect!

Upgrade for transmitter

Reset to default

Reboot

14

3. After connecting to a wireless network, click on Upgrade for transmitter.
Setting

Internet

not connect!

WIFI Password

59274042

Display mode

100%

Wireless Channel

Language

Auto

Upgrade

not connect!

Upgrade for transmitter

Reset to default

Reboot

4. On the laptop, if a firmware update is available the system will notify you. Click OK to update the firmware.
Do you want to upgrade? Local Version: 15476001 Server Version: 15736016 SSID: XXXXX IP: XXXXX MAC: XXXXX
OK Cancel

15

5. After clicking OK, the firmware update will begin. On the VG1656N’s screen the installation progress will be displayed.
Transmitter upgrading… (0/1) EzcastTX is installing … , please wait.
80%
NOTE:During the update process, please ensure that the power remains on and that the devices stay connected.
6. The VG1656N will restart and return to its initial screen after the update process is complete. The firmware update for the WiFi transmitter, the TX dongle, has now been completed.
16

Appendix

Specifications
Category Function Main Chip
Wi-Fi HDCP Support Video support Audio support
Latency Distance
Antenna

Transmitter AM8360D 5 GHz 1T1R HDCP 1.4
1920 x 1200 @ rb
2 channels, PCM 50ms~100ms 15 m (VG1656N) Antenna Type Manufacturer Model Name Antenna Gain EIRP Max Power Connector Type

Specifications
Printed Antenna Actionsmicro AM9421 2dBi 13dBm N/A

Interface

USB C1

x 1

Specifications

Physical Buttons

Re-Pair Button

x 1

Specifications

Miscellaneous Power Input
Power Consumption Physical Dimension
(W x H x D)
Weight
Operating Temperature
Operating Relative Humidity

5V/0.9A 4.5W 170 x 40 x 16 mm 6.69″ x 1.57″ x 0.63″ 37.5 g 0.08 lbs 0° C to 35° C. 32° F to 95° F

Specifications

10% to 90% (non-condensing)

NOTE:When connecting the mobile phone/tablet to the TX dongle, it may not be able to power the TX dongle if the battery level of the mobile phone/tablet is lower than 20%. Therefore, it is suggested that users fully charge the mobile phone/tablet first.
1- Ensure your device supports video output and power delivery via a USB Type C port (DisplayPort Alternative Mode on USB Type C).

17

LED Indicator
Transmitter Light
Solid White
Flashing (Slowly) Flashing (Quickly)
Off

Description
The Transmitter is connected to the Receiver successfully and is operating normally.
The Transmitter is ready to pair with the Receiver when the receiver is powered up.
The Transmitter is connecting with the Receiver.
The Transmitter is not working properly; or there is no power input.

18

Regulatory and Service Information
Compliance Information
This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.
FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Industry Canada Statement CAN ICES-003(B) / NMB-003(B)
19

FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC ID: GSS-VS19948 IC Radiation Exposure Statement The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. Radio Equipment Directive 2014/53/EU. The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
20

Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance
Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Bis(2-ethylhexyl) phthalate (DEHP) Butyl benzyl phthalate (BBP) Dibutyl phthalate (DBP) Diisobutyl phthalate (DIBP)

Proposed Maximum Concentration 0.1% 0.1% 0.01% 0.1% 0.1%
0.1%
0.1% 0.1% 0.1% 0.1%

Actual Concentration
< 0.1% < 0.1% < 0.01% < 0.1% < 0.1%
< 0.1%
< 0.1% < 0.1% < 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below:
· Copper alloy containing up to 4% lead by weight.
· Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
· Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
· Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC or higher.

21

Indian Restriction of Hazardous Substances Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.
USA & Canada: https://www.viewsonic.com/us/go-green-with-viewsonic Europe: https://www.viewsonic.com/eu/environmental-social-governance/recycle Taiwan: https://recycle.moenv.gov.tw/
For EU users, please contact us for any safety/accident issue experienced with this product:
ViewSonic Europe Limited Haaksbergweg 75 1101 BR Amsterdam Netherlands +31 (0) 650608655 EPREL@viewsoniceurope.com https://www.viewsonic.com/eu/
22

Copyright Information
Copyright© ViewSonic® Corporation, 2024. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic® and the three birds logo are registered trademarks of ViewSonic® Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA. Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.
LCD-WPD-001-TX_UG_ENG_1a_20240705 23

Customer Service
For technical support or product service, see the table below or contact your reseller.
NOTE:You will need the product’s serial number.

Country/ Region

Website

Country/ Region

Website

Asia Pacific & Africa

Australia (China)

www.viewsonic.com/au/ www.viewsonic.com.cn

Bangladesh ()

www.viewsonic.com/bd/ www.viewsonic.com/hk/

Hong Kong (English)

www.viewsonic.com/hk-en/

India