itC T-6247, T-521C Emergency Evacuation Controller Owner’s Manual
- October 30, 2023
- ITC
Table of Contents
Emergency Evacuation Controller T-6247 T-521C
T-6247 T-521C
itC T-6247, T-521C Emergency Evacuation Controller
Description:
It is easy to install controller features Auto, Manual, and Isolate modes,
selectable via the key switch. When selected to the Auto position the panel
will respond to any signal received from the buildings Fire Indicator
Board(FIB), This signal then activates the alert tone. If a pre-set time has
not been attended to, the panel will change to the evacuation mode. The
evacuation tone will continue to sound until the panel has been reset. In the
manual position any of the functions may be initiated from the front panel
controls.
This isolates the unit so that the alert, evacuation and bell tones will not
triggered. Provisions have been made for BGM source to be played through the
controller. BGM is automatically muted when any other function is operated. A
microphone input has been included on the front panel. This can be used for
either general or emergency paging. The Voice Over Message can be recorded by
setting the rear panel Mic Record switch to ON, and the message can be any
length from 1 to 20 seconds.
Features:
- Stand alone control unit.
- Interfaces with Fire Indicator Boards.
- Remote operation of Alert, Evac, Chime & Cancel tones.
- Auto / Manual / Isolate keys itch.
- Local operation of Alert, Evac and PA.
- Provision for voice over message.
- Microphone socket for PA use.
- Provision for BGM.
- Switched DC 24V output for override relays on volume controls.
- Switched DC 24V output for strobe operation for Alert mode.
- Switched DC 24V output for strobe operation Evac mode.
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30second increments.
- Auxiliary level output.
- Suitable for any amplifier with an auxiliary input.
- It can be used as a standard PA system.
Specifications:
| Model | T-6247 |
|---|---|
| Output Level | 0dBm(775mV) |
| THD | 0.05% |
| Frequency Response | 100Hz~18KHz |
| S/N Ratio | Aux/Music Input -85dB |
Alert/Evac/Chime -70dB
Input Sensitivity| MIC 5mV Balanced
BGM/Aux Input 350mV Unbalanced
Power Supply| ~110V-230V 50/60Hz & DC 24V
Power Consumption| 15W
Weight| 2.5Kg
Dimensions| 484 x 209 x 44mm
www.itctech.com.cn
info@itc-pa.com.cn
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>