FORTEC QBiP-6412A Single Board Computer User Manual

QBiP-6412A Single Board Computer

Manual
GIGAIPC
QBiP-6412A/ QBiP-6210A
3.5″ SubCompact SBC with Intel® Celeron® J6412 Processor, Dual Channel DDR4 memory, 4 x COM, 1 x SATA 6Gb/s, 4 x USB 3.2 Gen 1, 2 x USB 2.0
The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for any product failures or damages, immediate or consequential, resulting from the use of the information provided herein. Our products are not intended for use in systems in which failures of product could result in personal injury. All trademarks mentioned herein are property of their respective owners. All specifications are subject to change without notice.

3.5″ SBC Boards

QBiP-6412A/ QBiP-6210A
3.5″ SBC Boards User’s Manual 1st Ed

QBiP-6412A/QBiP-6210A

1 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

Copyright Notice
This document is copyrighted, 2022. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, or for any infringements upon the rights of third parties that may result from its use. The material in this document is for product information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, GIGAIPC assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. GIGAIPC reserves the right to make changes in the product design without notice to its users.

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 2

3.5″ SBC Boards

Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
· AMD® is trademark of Advanced Micro Devices. · Microsoft Windows is a registered trademark of Microsoft Corp. · Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel
Corporation · Core, Atom are trademarks of Intel Corporation · ITE is a trademark of Integrated Technology Express, Inc. · IBM, PC/AT, PS/2, and VGA are trademarks of International Business
Machines Corporation.
All other product names or trademarks are properties of their respective owners.

QBiP-6412A/QBiP-6210A

3 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

Packing List

Before setting up your product, please make sure the following items have been shipped:

Item QBiP-6412A/ QBiP-6210A SATA power cable

Quantity 1 1

If any of these items are missing or damaged, please contact your distributor or sales representative immediately.

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 4

3.5″ SBC Boards

About this Document
This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product.
Users may refer to the GIGAIPC.com for the latest version of this document.

QBiP-6412A/QBiP-6210A

5 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
4. Always completely disconnect the power before working on the system’s hardware.
5. No connections should be made when the system is powered as a sudden rush of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 6

3.5″ SBC Boards

dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and contain all electronic components in any static-shielded containers.
17. If any of the following situations arises, please the contact our service personnel: i. Damaged power cord or plug ii. Liquid intrusion to the device iii. Exposure to moisture iv. Device is not working as expected or in a manner as described in this manual v. The device is dropped or damaged vi. Any obvious signs of damage displayed on the device
18. D O N O T L E AV E T H I S D E V I C E I N A N U N C O N T R O L L E D ENVIRONMENT WITH TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES (SEE CHAPTER 1) TO PREVENT DAMAGE.

QBiP-6412A/QBiP-6210A

7 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

FCC Statement
This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions and your local government’s recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte. Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et les directives gouvernementales de recyclage.

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 8

3.5″ SBC Boards

China RoHS Requirements (CN)

GIGAIPC Main Board/ Daughter Board/ Backplane

(Pb) (Hg) (Cd) (Cr(VI))

(PBB)

(PBDE)

O SJ/T 11363-2006 X SJ/T 11363-2006

QBiP-6412A/QBiP-6210A

9 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

China RoHS Requirement (EN)

Poisonous or Hazardous Substances or Elements in Products GIGAIPC Main Board/ Daughter Board/ Backplane

Poisonous or Hazardous Substances or Elements

Component

Lead Mercury

(Pb)

(Hg)

Cadmium (Cd)

Hexavalent Chromium
(Cr(VI))

Polybrominated Biphenyls (PBB)

Polybrominated Diphenyl
Ethers (PBDE)

PCB & Other Components

O

O

O

O

O

Wires &

Connectors for External

O

O

O

O

O

O

Connections

OThe quantity of poisonous or hazardous substances or elements found in each of the component’s parts is below the SJ/T 11363-2006-stipulated requirement. X: The quantity of poisonous or hazardous substances or elements found in at least one of the component’s parts is beyond the SJ/T 11363-2006-stipulated requirement. Note: The Environment Friendly Use Period as labeled on this product is applicable under normal usage only

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 10

Table Contents

3.5″ SBC Boards

3.5″ SBC Boards

1

User’s Manual 1st Ed

Copyright Notice ………………………………………………………………….. 2

Acknowledgement ……………………………………………………………….. 3

Packing List………………………………………………………………………….. 4

About this Document ……………………………………………………………. 5

Safety Precautions ……………………………………………………………….. 6

FCC Statement……………………………………………………………………… 8

China RoHS Requirements (CN)………………………………………………. 9

China RoHS Requirement (EN) ……………………………………………… 10

Chapter1 – Product Specifications

14

1.1 Specifications- QBiP-6412A/ QBiP-6210A ………………….. 16

QBiP-6412A/QBiP-6210A

Chapter 2 ­ Hardware Information

18

2.1 Jumpers and Connectors ………………………………………… 19

2.2.1 FAN (FAN connector) ……………………………………………… 22

2.2.2 DC_IN (DC IN 1x4pin power connector) ……………………. 23

2.2.3 AT_CN (AT/ATX mode select jumper)…………………………. 24

2.2.4 BKL_CN (Backlight Control connector) ………………………. 25

2.2.5 JCOM1 (RI# pin RI#/5V/12V Select jumper for COM1 Port) …………………………………………………………………………….. 26

2.2.6 COM1, COM2, COM3, COM4 (Serial port header) ………. 27

2.2.7 SPKR (Speaker out connector) ………………………………….. 28 2.2.8 FP_AUDIO (Front panel audio header)……………………….. 29

11 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.9 SODIMMA, SODIMMB (DDR4 SO-DIMM sockets) ……….. 30 2.2.10 SYS_PANEL (Front panel header) ………………………………. 31 2.2.11 M2M (M.2 Slot, SATA, NGFF2280) …………………………….. 32 2.2.12 SATAPW (SATA power connector)…………………………. … 33 2.2.13 SATAIII (SATA 6GB/s Connector)……………………………. … 34 2.2.14 FUSB20 (USB 2.0 header) …………………………………………. 35 2.2.15 GPIO_CNT (General Purpose input/output header) … … 36 2.2.16 LVDS (LVDS connector)…………………………………………….. 37 2.2.17 LSW (LVDS resolution jumper) ………………………………….. 38 2.2.18 SIM_CARD (3G/4G SIM Slot) …………………………………….. 39 2.2.19 MPCIE (Mini PCIe slot)……………………………………………… 40 2.2.20 BUZZER (Buzzer header)………………………………………….. 41 2.2.21 BATTERY ……………………………………………………………….. 42 2.2.22 LAN1, LAN2 (LAN connector)…………………………………… 43 2.2.23 HDMI (HDMI connector) ………………………………………… 44 2.2.24 USB31_1, USB31_2 (USB 3.2 Gen 1 connector)………….. 45

Chapter 3 ­ BIOS

46

3.1 Introduction …………………………………………………………… 47

3.2 The Main Menu………………………………………………………. 48

3.3 Advanced ………………………………………………………………. 49

3.3.1 TPM Configuration………………………………………………….. 50

3.3.2 IT8786 Super IO Configuration …………………………………. 52

3.3.3 Hardware Monitor ………………………………………………….. 53

3.3.4 S5 RTC Wake Settings ……………………………………………… 54

3.3.5 CPU Configuration ………………………………………………….. 55

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 12

3.5″ SBC Boards

3.3.6 SATA Configuration …………………………………………………. 56 3.3.7 AMI Graphic Output Protocol Policy………………………….. 57 3.3.8 Network Stack Configuration……………………………………. 58 3.3.9 NVMe Configuration……………………………………………….. 59 3.3.10 Offboard SATA Controller Configuration ……………………. 60 3.3.11 Digital IO Port Configuration ……………………………………. 61 3.4 Chipset ………………………………………………………………….. 62 3.5 Security …………………………………………………………………. 63 3.6 Boot………………………………………………………………………. 66 3.7 Save & Exit …………………………………………………………….. 67

QBiP-6412A/QBiP-6210A

13 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Chapter 1
Chapter1 – Product Specifications QBiP-6412A / QBiP-6210A

14 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 15

3.5″ SBC Boards

1.1 Specifications- QBiP-6412A/ QBiP-6210A

Motherboard

QBiP-6412A

QBiP-6210A

Form Factor
CPU Socket Chipset Memory Ethernet
Video

3.5” SBC 146W x 101.7D (mm) Intel® Celeron® J6412 Processor 10nm, 4 cores, 4 threads, up to 2.60 GHz TDP 10W 1 x FCBGA1493

Intel® Celeron® N6210 Processor 10nm, 2 cores, 2 threads, up to 2.60 GHz TDP 6.5W

— 2 x DDR4 SO-DIMM sockets, Max. Capacity 32 GB Support Dual Channel DDR4 3200 MHz memory modules
2 x GbE LAN Ports (Intel® I211AT)
Integrated Graphics Processor Intel® UHD Graphics for 10th Gen Intel® Processors: 2 x HDMI 2.0 port, supporting a maximum resolution of 4096×2160 @60Hz 1 x LVDS port, supporting a maximum resolution of 1920×1080 @60Hz

Audio Storage Raid
Expansion Slots

(3 independent display outputs) Realtek® Audio Codec 1 x SATA 6Gb/s Port
— 1 x 2280 M.2 M-Key (SATA 6Gb/s, support NVMe SSD) 1 x Full-size mini PCIe with SIM slot

QBiP-6412A/QBiP-6210A

16 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

Motherboard

QBiP-6412A

QBiP-6210A

Internal I/O

1 x 4-pin box power connector (+9V~36VDC) 1 x SATA Power header 1 x CPU fan header 1 x Front panel header 1 x Front panel audio header 1 x 2W Speaker out header 2 x USB 2.0 headers 1 x COM header (RS-232/422/485 & RI/5V/12V) 1 x COM header (RS-232/422/485) 2 x COM headers (RS-232) 1 x Backlight Control header 1 x AT/ATX mode select jumper 1 x GPIO (8 bits) & SMBus header 1 x Buzzer header

Rear I/O

1 x Headphone Jack 2 x HDMI 2 x RJ45 LAN Ports 4 x USB 3.2 Gen 1

TPM

—

OS Compatibility Windows 10 (x64)

Operating temperature: 0°C to 60°C

Operating

Operating humidity: 0-90% (non-condensing)

Properties

Non-operating temperature: -40°C to 85°C

Non-operating humidity: 0%-95% (non-condensing)

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 17

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Chapter 2
Chapter 2 ­ Hardware Information

18 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.1 Jumpers and Connectors
1

10

12

13

14

15

2

11

16

17

3

4

9

5 18

6

20

21

19

7

8

25

24

23

22

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 19

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

No Code

Description

1 FAN

FAN connector

2 DC_IN

3 AT_CN

4 BKL_CN

5 JCOM1

COM1

6

COM2 COM3

COM4

DC IN 1x4pin power connector
AT/ATX mode select jumper
Backlight Control connector
RI# pin RI#/5V/12V Select jumper for COM1 port
Serial port header COM1 : RS-232/422/485 & RI/5V/12V COM2 : RS-232/422/485 COM3, COM4 : RS-232

7 SPKR

Speaker out connector

8 FP_AUDIO SODIMMA
9 SODIMMB 10 SYS_PANEL 11 M2M 12 SATAPW 13 SATAIII 14 FUSB20 15 GPIO_CNT 16 LVDS 17 LSW

Front panel audio header
DDR4 SO-DIMM sockets x 2
Front panel header M.2 slot, SATA, NGFF2280 SATA power connector SATA 6GB/s connector USB 2.0 header General Purpose input/output header LVDS connector LVDS resolution jumper

18 SIM_CARD 19 MPCIE 20 BUZZER 21 BATTERY

3G/4G Sim Slot Mini-PCIe slot Buzzer header Battery cable connector

20 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

No Code

Description

22 AUDIO

Line out connector

23 LAN1, LAN2 LAN connector

24 HDMI

HDMI connector

25

USB31_1, USB31_2

USB 3.2 Gen 1 connector x 4

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 21

2.2.1 FAN (FAN connector)

1

Pin1

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

CPU/System FAN 4 3 2 1

Pin No. 1 2 3 4

Definition GND 12V Detect
Speed Control

Connector PN 85205-0470N A1250WV-S-04PC

Vendor ACES JOINT-TECH

22 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.2 DC_IN (DC IN 1x4pin power connector)

2

Pin1

DC in Connector

Pin No.
1 2 3 4

Definition
GND Power in Power in
GND

Connector PN 753-81-04TW00

Vendor PINREX

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 23

2.2.3 AT_CN (AT/ATX mode select jumper)
3
Pin1

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

AT/ATX mode select jumper 1-2 Close : AT mode. 2-3 Close : ATX mode.
1
(Default setting)

Pin No. 1 2 3

Definition AT MODE
Detect ATX MODE

Connector PN 220-96-03GB01 PH03N2-7BAN000

Vendor PINREX HORNGTONG

24 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.4 BKL_CN (Backlight Control connector)
4
Pin1

Backlight Control connector

5

1

Pin No.
1 2 3 4 5

Definition
5V PWM Backlight Enable GND 12V

Connector PN 721-81-05TW00 A2001WV-05P146

Vendor PINREX JOINT-TECH

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 25

3.5″ SBC Boards

2.2.5 JCOM1 (RI# pin RI#/5V/12V Select jumper for COM1 Port)
5
Pin1

QBiP-6412A/QBiP-6210A

JCOM1 Jumper Select

5

1

6

2

1-2 Close: 5V (Power COM)

5

1

6

2

3-4 Close: RI (Stand COM)

5

1

6

2

5-6 Close: 12V (Power COM)

Connector PN 220-97-03GB01 PH06N53BAZ000

Vendor PINREX HORNGTONG

26 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.6 COM1, COM2, COM3, COM4 (Serial port header)
6
Pin1

Serial Port Cable Connector

10

2

9

1

Connector PN 725-81-10TW00 A2004WV-2X05P46

Vendor PINREX JOINT-TECH

Pin No. RS-232

1

RXD

2

DCD

3

DTR

4

TXD

5

DSR

6

GND

7

CTS

8

RTS

9 No Connect

10 RI/5V/12V

RS-422 Full Duplex
TXD+ TXDRXDRXD+
­ ­ ­ ­ ­ ­

RS-485 Half Duplex
D+ D­ ­ ­ ­ ­ ­ ­ ­

Note : COM1 : Support RS-232/422/485 & RI/5V/12V For RI/5V/12V jumper setting, please see P. 29 COM2 : Support RS-232/422/485 COM3, COM4 : Support RS-232 only

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 27

2.2.7 SPKR (Speaker out connector)
7

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Pin1

Speaker out connector

Pin No.
1 2 3 4

Definition
Speaker Out L+ Speaker Out LSpeaker Out RSpeaker Out R+

Connector PN 721-81-045W00 A2001WV-04P146

Vendor PINREX JOINT-TECH

28 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.8 FP_AUDIO (Front panel audio header)
8

Front panel audio Connector
9 10

Connector PN 725-81-10TW00 A2004WV-2X05P46

Pin1
Vendor PINREX JOINT-TECH

Pin No.
1 2 3 4 5 6 7 8 9 10

12
Definition MIC-LEFT
GND MIC-RIGHT
Detect LINE-RIGHT
GND JACKSENCE Detect
NC LINE-LEFT
GND

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 29

2.2.9 SODIMMA, SODIMMB (DDR4 SO-DIMM sockets)
99

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

30 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.10 SYS_PANEL (Front panel header)

10

Pin1

System Panel Header
11 1

Pin No.
1 2 3 4 5 6 7 8 9

12 2
Definition HD-p MPD-p HD-n MPD-n GND
POWER-ON Reset Button
GND No Connect

Pin No. 10 11 12
Connector PN 87216-1206-06

Definition No Connect No Connect No Connect
Vendor ACES

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 31

2.2.11 M2M (M.2 Slot, SATA, NGFF2280)
11

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

M.2 M Key Connector

75

74

Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33

1
Definition GND GND NC NC GND NC NC GND NC NC GND NC NC GND
PCIE1 RXn PCIE1 RXp
GND

2
Pin No. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34

Definition 3.3V 3.3V NC NC
SSD LED 3.3V 3.3V 3.3V 3.3V NC NC NC NC NC NC NC NC

Pin No. 35 37 39 41 43 45 47 49

Definition PCIE2 TXn PCIE2 TXp
GND PCIE0 RXn/SATA Bp PCIE0 RXp/SATA Bn
GND PCIE0 TXn/SATA An PCIE0 TXp/SATA Ap

Pin No. 36 38 40 42 44 46 48 50

51

GND

52

53

PCIE Clock n

54

55

PCIE Clock p

56

57

GND

58

Definition NC NC NC NC NC NC NC
PCI Reset PCIE Clock Request
NC NC NC

Pin No. 67 69 71 73 75

Definition NC
Detect GND GND GND

Pin No. 68 70 72 74

Definition NC 3.3V 3.3V 3.3V

Connector PN 80159-8521

Vendor BELLWETHER

32 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.12 SATAPW (SATA power connector)

12

Pin1

Hard Disk Power Connector

Pin No.
1 2 3 4

Definition
12V GND GND 5V

Connector PN 743-51-04TW03 WF04Q2-3BJQ000

Vendor PINREX HORNGTONG

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 33

2.2.13 SATAIII (SATA 6GB/s Connector)
13
Pin1

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

SATA 6GB/s Connector

Pin No.
1 2 3 4 5 6 7

Definition
GND TXp TXn GND RXn RXp GND

SATAIII Connector PN WAT3M-07A1G3BU4W ABA-SAT-054-S15

Vendor WINWIN
LOTES

34 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.14 FUSB20 (USB 2.0 header)

14

Pin1

USB 2.0 Header
91
10 2

Connector PN 210-92-05GB04 PH10R53BAZ009

Vendor PINREX HORNGTONG

Pin No.
1 2 3 4 5 6 7 8 9 10

Definition
5V 5V D2n D1n D2p D1p GND GND No Pin No Connect

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 35

2.2.15 GPIO_CNT (General Purpose input/output header)
15
Pin1

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

GPIO Connector

Pin No.
1 2 3 4 5 6 7 8 9 10 11 12

Definition
GPIO-output_1 GPIO-input_1 GPIO-output_2 GPIO-input_2 GPIO-output_3 GPIO- input_3 GPIO-output_4 GPIO-input_4 SMBus Clock SMBus DATA
5V GND

Connector PN 725-81-12TW00 A2004WV-2X06P46

Vendor PINREX JOINT-TECH

36 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.16 LVDS (LVDS connector)
16
Pin1

LVDS Connector

40

2

39

1

Pin No.
17 18 19 20

Definition
A3A2GND GND

Pin No.
37 38 39 40

Definition
GND GND 12V 12V

Pin No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Definition
3.3V 5V 3.3V 5V SPEC0 SPED0 GND GND A1+ A0+ A1A0GND GND A3+ A2+

Pin No.
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Definition
A5+ A4+ A5A4GND GND A7+ A6+ A7A6GND GND CLK2+ CLK1+ CLK2CLK1-

For each model support LVDS function. But below model no need to add. A0~A3 is odd channel 0~3, A4~A7 is even channel.

Connector PN
712-76-40GWE0 A1252WV-SF-2X20PD01

Vendor
PINREX JOINT-TECH

Note: *The LVDS output connector of the unit is only intended to be connected to an UL/IEC/EN approval equipment with fire enclosure.

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 37

2.2.17 LSW (LVDS resolution jumper)
17
Pin1

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

LVDS Resolution Jumper

Jumper Setting

Resolution

Jumper Setting

Resolution

1 800 x 600

1 1366 x 768

8

18bit (default) 8

24bit

1 1024 x 768

1 1440 x 900

8

18bit

8

24bit

1 1024 x 768

1 1400 x 1050

8

24bit

8

24bit

1 1024 x 600

1 1600 x 900

8

18bit

8

24bit

1 1280 x 800

1 1680 x 1050

8

18bit

8

24bit

1 1280 x 960

1 1600 x 1200

8

18bit

8

24bit

1 1280 x 1024

1 1920 x 1080

8

24bit

8

24bit

1 1366 x 768

1 1920 x 1200

8

18bit

8

24bit

Connector PN 222-97-04GBE1

Vendor PINREX

38 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.18 SIM_CARD (3G/4G SIM Slot)
18

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 39

2.2.19 MPCIE (Mini PCIe slot)
19

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Mini PCIe Connector

53

52

51

2

1

54

Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29

Definition PCIE WAKE
NC NC PCIE Clock Request GND PCIE Clock n PCIE Clock p GND NC NC GND PCIE RXn PCIE RXp GND GND

Pin No. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30

Definition 3.3V GND NC
SIM VCC SIM DATA SIM Clock SIM Reset UIM VPP3
GND WLAN_DISABLE
Reset 3.3V GND NC SMB Clock

Pin No. 31 33 35 37 39 41 43 45 47 49 51 53

Definition PCIE TXn PCIE TXp GND GND 3.3V 3.3V GND NC NC NC NC GND

Connector PN AS0B221-S99Q-7H

Pin No. 32 34 36 38 40 42 44 46 48 50 52 54

Definition SMB DATA
GND USB Dn USB Dp
GND NC NC NC NC GND 3.3V GND

Vendor FOXCONN

40 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.20 BUZZER (Buzzer header)
20

Buzzer header

Pin No. 1 2

Definition Buzzer 5V

Connector PN 712-71-02TW01 A1250WV-02P

Vendor PINREX JOINT-TECH

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 41

2.2.21 BATTERY
21

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Pin1

Battery Cable Connector

Pin No. 1 2

Definition 3V GND

Connector PN 85205-0270L A1250WV-S-02PC

Vendor ACES JOINT-TECH

42 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.22 LAN1, LAN2 (LAN connector)
23

LAN Connector

Pin No.
1 2 3 6 4 5 7 8

Definition
TX1+ TX1TX2+ TX2TX3+ TX3TX4+ TX4-

Status Orange On Green On
Off

Description 1Gbps data rate 100Mbps data rate 10Mbps data rate

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

www.gigaipc.com 43

2.2.23 HDMI (HDMI connector)
24

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

HDMI Connector

Pin No.
1 2 3 4 5 6 7 8 9 10 11

Definition
TX2p GND TX2n TX1p GND TX1n TX0p GND TX0n CLKp GND

Pin No.
20 21 22 23 24 25 26 27 28 29 30

Definition
TX2p GND TX2n TX1p GND TX1n TX0p GND TX0n CLKp GND

Pin No. 12 13 14 15 16 17 18
19

Definition
CLKn NC NA DDC Clock DDC Data GND 5V Hot Plug Detect

Pin No. 31 32 33 34 35 36 37
38

Definition
CLKn NC NA DDC Clock DDC Data GND 5V Hot Plug Detect

44 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.2.24 USB31_1, USB31_2 (USB 3.2 Gen 1 connector)
25

USB Connector

Pin No.
1 2 3 4 5 6 7 8 9 10

Definition
5V D1n D1p GND USB3_RX1n USB3_RX1p GND USB3_TX1n USB3_TX1p 5V

Pin No.
11 12 13 14 15 16 17 18

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

Definition D0n D0p GND
USB3_RX2n USB3_RX2p
GND USB3_TX2n USB3_TX2p
www.gigaipc.com 45

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Chapter 3
Chapter 3 ­ BIOS
46 www.gigaipc.com

3.1 Introduction
BIOS (Basic input/output system) provides hardware detailed information and boot-up options, which include firmware to control, set-up and test all hardware settings. Therefore, BIOS is the communication bridge between OS/application software and hardware.
3.1.1 How to Entering into BIOS menu Once the system is power on, press the key as soon as possible to access into BIOS Setup program.

3.1.2 Function Keys to setup in BIOS Setup program

Function keys

Description
Select Screen Select Item

Enter

Execute command or enter the submenu

Increase the numeric value or make changes

­

Decrease the numeric value or make changes

F1

General Help

F2

Previous Values

F3

Load Optimized Defaults Settings

F4

Save changes & Exit the BIOS Setup program

ESC

Exit the BIOS Setup program

www.gigaipc.com

47

3.2 The Main Menu
The main menu shows the basic system information. Use arrow keys to move among the items.

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Items Project Name BIOS Version
Build Date and Time
LAN1 MAC Address LAN2 MAC Address
Total Memory ME FW version
System Date
System Time

Description Shows Project name information Shows the BIOS version of the system Shows the Build Date and Time when the BIOS was
created. Shows LAN1 MAC Address information Shows LAN2 MAC Address information Shows the total memory size of the installed memory
Shows ME firmware version Set the Date for the system (Format : Week – Month – Day – Year) Set the time for the system (Format : Hour – Minute – Second)

48 www.gigaipc.com

3.3 Advanced
The Advanced menu is to configure the functions of hardware settings through submenu. Use arrow keys to move among the items, and press to access into the related submenu.

www.gigaipc.com

49

3.3.1 TPM Configuration Use TPM Configuration submenu to choose TPM interface.

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Item

Description

TPM Device Selection

PTT : Internal TPM (Default setting)

50 www.gigaipc.com

Trusted Computing : Shows TPM information, and TPM module configuration setting.

Item
Security Device support

Description
Enabled : Enables TPM feature (Default setting) Disabled : Disables TPM feature

Item

Description

Pending operation

None : No execution will be conducted (Default setting) TPM clear : Set to clear data on TPM

www.gigaipc.com

51

3.3.2 IT8786 Super IO Configuration

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Item
Super IO Chip
Serial Port 1 Configuration

Description
Shows Super I/O chip model
Press [Enter] to configure advanced items :
Serial Port : Enabled : Enables allows you to configure the serial port settings Disabled : if Disabled, displays no configuration for the serial port

Serial Port 2 Configuration
Serial Port 3 Configuration
Serial Port 4 Configuration

Device settings : Display the specified Serial Port base I/O address and IRQ
COM Port Mode : Choose RS-232, RS-422, or RS-485 feature Press [Enter] to configure advanced items :
Serial Port : Enabled : Enables allows you to configure the serial port settings Disabled : if Disabled, displays no configuration for the serial port
Device settings : Display the specified Serial Port base I/O address and IRQ

52 www.gigaipc.com

3.3.3 Hardware Monitor

Item
CPU Fan Fail Warning
CPU Fan Speed Control

Description
Enabled : Enables CPU FAN Fail warning alert function (Default setting) Disabled : Disables CPU FAN Fail warning alert function
Normal : Fan speed set by BIOS default (Default setting) Full Speed : Set Fan operates at full speed

CPU temperature Shows current CPU temperature

System temperature Shows current system temperature

CPU Fan Speed Shows current CPU fan Speed

www.gigaipc.com

53

3.3.4 S5 RTC Wake Settings

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Item
Wake system from S5

Description
Enable or Disable System to wake on a specific time. Disabled : Disables system to wake on a specific time (Default setting) Fixed Time : Enables system to wake on a specific time
(Format : hr : min : sec)

54 www.gigaipc.com

3.3.5 CPU Configuration This submenu shows detailed CPU informations.

Item

Description

Intel Virtualization Technology

Virtualization enhanced by Intel® Virtualization Technology will allow a platform to run multiple operating systems and applications in independent partitions. With virtualization, one computer system can function as multiple virtual systems. Enabled : Enables Intel Virtualization Technology (Default setting) Disabled : Disables Intel Virtualization Technology

According to System loading, Enhanced Intel SpeedStep Technology (EIST)will

automatically adjust the CPU voltage and core frequency to decrease heat and

EIST

power consumption for power saving.

Enabled : Enables EIST Technology (Default setting)

Disabled : Disables EIST Technology

Turbo Mode

Enabled : Enables Turbo Mode (Default setting) Disabled : Disables Turbo Mode

CPU C states

Command CPU to enter into low power consumption mode when CPU is under idle mode. Enabled : Enables C states (Default setting) Disabled : Disables C states

CPU P states

CPU will adjust frequency depends on it’s loading. Enabled : Enables CPU P states function (Default setting) Disabled : Disables CPU P states function

www.gigaipc.com

55

3.3.6 SATA Configuration

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Item
SATA Mode Selection

Description
AHCI : Configures the SATA controllers to AHCI mode. (Default setting)

Serial ATA Port 0 shows 2.5″ SATA HDD/SSD information

M.2

shows M.2 SATA interface SSD information

56 www.gigaipc.com

3.3.7 AMI Graphic Output Protocol Policy

Item

Description

Output Select

Choose default monitor output when there are more than one monitor plugged on the motherboard.

www.gigaipc.com

57

3.3.8 Network Stack Configuration

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Item
Network Stack

Description
When system is power on, install LAN driver under UEFI mode Disabled : Disables UEFI Network Stack (Default setting) Enabled : Enables UEFI Network Stack

When Network stack is enabled : Ipv4 PXE Support Disabled : Disables Ipv4 PXE Support
Enabled : Enables Ipv4 PXE Support

When Network stack is enabled : Ipv6 PXE Support Disabled : Disables Ipv6 PXE Support
Enabled : Enables Ipv6 PXE Support

58 www.gigaipc.com

3.3.9 NVMe Configuration
NVMe Configuration shows information when your M.2 NVMe PCIe SSD is installed.

www.gigaipc.com

59

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

3.3.10 Offboard SATA Controller Configuration
60 www.gigaipc.com

3.3.11 Digital IO Port Configuration

Item
OS control Digital IO

Description
Disabled : If Digital IO Output value/level is modified in OS, they will not be memorized and kept. (Default setting) Enabled : If Digital IO Output value/level is modified in OS, they will be memorized and kept.

SOGPO_1 (Pin 1) SOGPI_1 (Pin 2) SOGPO_2 (Pin 3) SOGPI_2 (Pin 4) SOGPO_3 (Pin 5) SOGPI_3 (Pin 6) SOGPO_4 (Pin 7) SOGPI_4 (Pin 8)

Configure Digital IO Input or Output values for each pin.

www.gigaipc.com

61

3.4 Chipset

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Item

Description

VT-d

Enabled : Enables VT-d function (Default setting) Disabled : Disables VT-d function

DVMT PreAllocated

Use DVMT Pre-Allocated to set the amount of system memory which is installed to the integrated graphics processor Option items : 32M , 64M(Default setting) , 128M , 256M

HD Audio

Enable/Disable onboard audio controller Enabled : Enables onboard audio controller (Default setting) Disabled : Disables onboard audio controller

Onboard LAN1 Onboard LAN2

Enable/Disable onboard LAN controller Enabled : Enables onboard LAN controller (Default setting) Disabled : Disables onboard LAN controller

Restore AC Power Loss

To set which option the system should returns if a sudden power loss occured Power off : Do not power on when the power is back (Default setting) Power on : System power on when the power is back Last state : Restore the system to the state before power loss occures

Watchdog Timer

Enable/Disable Watchdog Timer function Enabled : Enables Watchdog Timer function Disabled : Disabled Watchdog Timer function (Default setting)

LVDS Support

Disabled : Disables LVDS Support (Default setting) Enabled : Enables LVDS Support

Brightness Level

To modified the backlight brightness of the LVDS panel Option items : 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100% (Default Setting)

XHCI Hand-off

Enable/Disable XHCI Hand-off function Enabled : Enables XHCI Hand-off function (Default setting) Disabled : Disables XHCI Hand-off function

BIOS Lock

Enable/Disable BIOS Lock function Enabled : Enables BIOS Lock function (Default setting) Disabled : Disabled BIOS Lock funtion

62 www.gigaipc.com

3.5 Security

Item
Administrator Password
User Password

Description
To set up Administrator’s password Minimum length : 3 Maximum length : 20
To set up User’s password Minimum length : 3 Maximum length : 20

Secure Boot Press to configure the advanced items

www.gigaipc.com

63

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Item
Secure Boot

Description
Secure Boot requires all the applications that are running during the booting process to be pre-signed with valid digital certificates Enabled : Enables Secure Boot function Disabled : Disables Secure Boot function (Default setting)

Secure Boot Mode

Standard : Standard mode Custom : Custom mode (Default setting)

Restore Factory Keys

To restore factory settings Yes : Agree to restore factory settings No : Cancel to restore factory settings

Reset To Setup Yes : Agree to setup mode

Mode

No : Cancel to setup mode

Enables expert users to modify Secure boot policy variables without full Key Management authentication
Press to configure the advanced items

64 www.gigaipc.com

Item

Description

Item

Description

Factory Key Provision

Install factory default Secure Boot keys after the platform reset and while the system is in Setup mode Enabled : Enables Factory Key Provision (Default setting) Disabled : Disables Factory Key Provision

To restore factory settings

Restore Factory Keys

Yes : Agree to restore factory settings No : Cancel to restore factory

settings

Platform Key (PK)

Key Exchange Keys

Authorized Signatures
Forbidden Signatures

These items allows you to enroll factory defaults or load Certificates from a file.

Reset To Yes : Agree to setup mode Setup Mode No : Cancel to setup mode
Export Copy NVRAM content of Secure Boot Secure Boot variables to files in a root folder on a
variables file system device
Enroll Efi Allow the image to run in Secure Image Boot mode

Authorized TimeStamps
OsRecovery Signatures

Remove ‘UEFI CA’ from DB

To remove ‘UEFI CA’ from database Yes : Agree to remove ‘UEFI CA’ from database No : Cancel to remove ‘UEFI CA’ from database

Restore DB defaults

Restore DB variables to factory defaults Yes : Agree to restore DB defaults No : Cancel to restore DB defaults

www.gigaipc.com

65

3.6 Boot This Boot menu allows you to set/change system boot options

3.5″ SBC Boards

QBiP-6412A/QBiP-6210A

Item
Full Screen LOGO Show

Description
Enable/Disable full screen LOGO show on POST screen Enabled : Enables Full screen LOGO Show on POST screen Disabled : Disables Full screen LOGO Show on POST screen (Default setting)

Boot Option #1 Shows the information of the storage that be installed in the system Boot Option #2 Choose/set the boot priority

66 www.gigaipc.com

3.7 Save & Exit

Item
Save Changes and Reset

Description
After configuring all the options that you wish to change, choose this option to save all the changes and reboot the system Yes : Agree to save and reset No : Cancel to save and reset

Discard Changes and Reset

Choose this option to reboot the system without saving any changes Yes : Agree to discard changes and reset No : Cancel to discard changes and reset

Restore Defaults
Me FW Image Re-Flahs

Restore/Load default values for all the setup options Yes : Agree to load optimized defaults No : Cancel to load optimized defaults
Enable/Disable Me FW image re-flash function Enabled : Enables Me FW image re- flash function Disabled : Disables Me FW image re-flash function (Default setting)

www.gigaipc.com

67

Our company network supports you worldwide with offices in Germany, Austria, Switzerland, the UK and the USA. For more information please contact:

Headquarters
Germany

FORTEC Elektronik AG
Augsburger Str. 2b 82110 Germering

Phone: E-Mail: Internet:

+49 89 894450-0 info@fortecag.de www.fortecag.de

Fortec Group Members
Austria Germany Switzerland United Kingdom USA

Distec GmbH Office Vienna
Nuschinggasse 12 1230 Wien

Phone: E-Mail: Internet:

+43 1 8673492-0 info@distec.de www.distec.de

Distec GmbH
Augsburger Str. 2b 82110 Germering

Phone: E-Mail: Internet:

+49 89 894363-0 info@distec.de www.distec.de

ALTRAC AG
Bahnhofstraße 3 5436 Würenlos

Phone: E-Mail: Internet:

+41 44 7446111 info@altrac.ch www.altrac.ch

Display Technology Ltd.
Osprey House, 1 Osprey Court Hinchingbrooke Business Park Huntingdon, Cambridgeshire, PE29 6FN

Phone: E-Mail: Internet:

+44 1480 411600 info@displaytechnology.co.uk www. displaytechnology.co.uk

Apollo Display Technologies, Corp.
87 Raynor Avenue, Unit 1 Ronkonkoma, NY 11779

Phone: E-Mail: Internet:

+1 631 5804360 info@apollodisplays.com www.apollodisplays.com

References

• FORTEC Power: Ihr Lösungsanbieter für Stromversorgungen
• Innovative TFT Display und Monitor Lösungen
• FORTEC Elektronik AG
• 技宸GIGAIPC｜專業工業電腦品牌

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>