ZEBRA S-MTRX Supersight Solo Regulatory Instruction Manual
- June 21, 2024
- ZEBRA
Table of Contents
- ZEBRA S-MTRX Supersight Solo Regulatory
- Product Specifications
- Product Usage Instructions
- Frequently Asked Questions
- Regulatory Information
- Safety Precautions
- Ergonomic Recommendations
- Connecting to a LAN Network
- United States and Canada Regulatory
- Service Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZEBRA S-MTRX Supersight Solo Regulatory
Product Specifications
- Model: S-MTRX
- Regulatory Approval: Zebra Technologies Corporation
- Regulatory Class: Class A
- Compliance: Directives 2014/30/EU, 2014/35/EU, 2011/65/EU
- LAN Connectivity: Indoor LAN only
- Regulatory Compliance: FCC Part 15, ICES-003, VCCI-A
Product Usage Instructions
Safety Precautions
Before installing or using Zebra Supersight, familiarize yourself with the safety precautions and symbols. Ensure that the product is used as specified to maintain protection levels.
Connecting to a LAN Network
Only connect the device to an indoor LAN network. Outdoor connections via Ethernet cable are not authorized.
European Economic Area Compliance
Zebra Supersight complies with Directives 2014/30/EU, 2014/35/EU, and 2011/65/EU. The EU Declaration of Conformity can be found at zebra.com/doc.
Waste Electrical and Electronic Equipment (WEEE)
EU and UK customers should refer to recycling/disposal advice on zebra.com/weee for products at the end of their life.
Regulatory Compliance (US, Canada, UK, etc.)
The device complies with various regulatory standards in different regions. Check the specific compliance statements for each region mentioned in the manual.
Frequently Asked Questions
- 1. Can I connect Zebra Supersight to an outdoor LAN network?
- No, Zebra Supersight is only authorized for connection to indoor LAN networks. Outdoor connections are not tested or supported.
- 2. How can I ensure compliance with safety regulations while using Zebra Supersight?
- Always follow the safety precautions outlined in the manual and ensure that the product is used as specified by Zebra Technologies Corporation.
Regulatory Information
This device is approved under Zebra Technologies Corporation. This guide applies to the following model number: S-MTRX All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translation
Any changes or modifications to Zebra equipment not expressly approved by
Zebra could void the user’s authority to operate the equipment. Declared
maximum operating temperature: 35°C
CAUTION: This is a Class A product. This equipment is not intended for
use in residential environments and may not provide adequate protection to
radio reception in such environments.
Regulatory Markings
Regulatory markings subject to certification are applied to the device. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc
Safety Precautions
Zebra Supersight safety precautions and key to symbols Before installing, connecting to, and using Zebra Supersight, you shall be aware of the meaning of the symbols on the unit and important safety precautions. The following is a list of precautionary symbols on the unit and their meaning
Symbola | Description |
---|---|
• Caution: Consult this product’s installation and hardware reference |
manual before installing, connecting to, and using Zebra Supersight. For hardware installation instructions, refer to Chapter 2: Getting Started with your Zebra Supersight and Chapter 3: Cleaning the air filter and connecting devices to the backplane and SHB board; for environmental and electrical specifications and connector pinout descriptions, refer to Appendix B: Technical reference.
This product must be used as specified; otherwise, the protection provided by its components might be compromised. Any usage, changes, or modifications to Zebra equipment not expressly approved by Zebra could compromise product safety and void the user’s authority to operate the equipment.
• Refer to the Electrical specifications section, in Appendix B: Technical reference of the above-mentioned manual, for voltages and current ratings.
• To service the equipment, always turn off the unit and disconnect the main AC power before opening the unit. Always secure the equipment and close the chassis before reconnecting the main AC power.
• This product is a Class I equipment as per industry standards.
• This product is designed for use in a pollution degree 2 environment as per industry standards.
• This product is designed for indoor use only.
• This product is designed to operate at temperatures ranging from 0°C to 35°C at a non-condensing relative humidity of 10 to 90%.
• This product is not intended for use at altitudes exceeding 2000 m.
- a. Note that these symbols might not necessarily be the same color as depicted.
- b. Manual available on the Zebra website at zebra.com/mv-manuals
- c. As per CAN/CSA-C22.2 No. 62368-1-14, ANSI/UL 62368-1-2014, EN 62368-1:2014 + A11:2017, IEC 62368-1:2014 (ed. 2.0).
Ergonomic Recommendations
In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
Connecting to a LAN Network
Please note that this device is not tested or authorized to be connected via Ethernet cable to a Local Area Network (LAN) in outdoor conditions. It may only be connected to an indoor LAN.
Marking and European Economic Area (EEA)
Statement of Compliance
- Zebra hereby declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU and 2011/65/EU.
- The full text of the EU Declaration of Conformity is available at: zebra.com/doc.
- EU Importer : Zebra Technologies B.V
- Address: Mercurius 12, 8448 GX Heerenveen, Netherlands
Waste Electrical and Electronic Equipment (WEEE)
For EU and UK Customers: For products at the end of their life, please refer to recycling/disposal advice at: zebra.com/weee.
United States and Canada Regulatory
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Radio Frequency Interference Requirements
Canada Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-003 (A)/NMB-003(A)
- United Kingdom
- Statement of Compliance
Zebra hereby declares that this device is in compliance with the Electromagnetic Compatibility Regulations 2016, the Electrical Equipment (Safety) Regulations 2016 and the Restriction of the Use of Certain Hazardous Substances in
- Electrical and Electronic Equipment Regulations 2012.
- The full text of the UK Declaration of Conformity is available at: zebra.com/doc.
- UK Importer: Zebra Technologies Europe Limited
- Address: Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF
Warranty
For the complete Zebra hardware product warranty statement, go to: zebra.com /mv-support.
Service Information
Before you use the unit, it must be configured to operate in your facility’s network and run your applications. If you have a problem running your unit or using your equipment, contact your facility’s Technical or System Support. If there is a problem with the equipment, they will contact Zebra support atzebra.com/mv-support. For the latest version of the guide, go to: zebra.com/mv-manuals.
Patent Information
This product may be protected by one or more patents.
- Patents: zebra.com/patents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>