SAMSUNG Galaxy R180 Live Wireless Earbuds User Manual
- June 6, 2024
- Samsung
Table of Contents
Galaxy Buds Live
User manual
Getting started
Device layout
Set up your device
Start using your device
Music features
Call features
Device layout
Set up your device
Learn more about your device hardware, assembling and charging, and how to get
started using your new device.
Charge the battery
Your device case is also the charger.
- Place the earbuds into the charging case. For best results, do not insert earbuds in the charging case if they are wet or dirty.
- Close the charging case, and either connect the USB cable as shown or place the charging case on a wireless charger. The earbuds and charging case are charged simultaneously.
CAUTION The charging head for plugging the USB cable into a wall outlet is not included. Use only Samsung charging devices rated with an output voltage of 5v and an output current of over 150mA (sold separately). Samsung accessories are designed for your device to maximize battery life. Using other accessories may cause damage, and damage may not be covered by a warranty.
While charging, the device and the charger may become hot. This does not
affect the device’s lifespan or performance and is in the device’s normal
range of operation.
Remove the device from the charger and wait for the device to cool down. For
more information, visit
https://www.samsung.com/us/support/answer/ANS00076952.
NOTE Do not disassemble, modify, or repair your device. Placing objects, such as magnetic stripe cards, including credit cards, phone cards, passbooks, and boarding passes, next to the device or charger may cause damage from the charger or device’s magnetic field.
Check the charge status
When you connect the earbuds and the charger case the LED indicators flash
certain colors to indicate the battery level.
- Green: Fully charged or above 60% battery.
- Yellow: Between 30 and 60% battery.
- Red: Charging or below 30% battery.
- Flashing Red: Charging error. Reconnect the case and earbuds. If the error occurs again, contact a Samsung Service Center for service support.
NOTE You can check the battery level for the case and earbuds in the Galaxy Wearable app. For more information, see Battery level.
Wireless PowerShare
Wirelessly charge your device using a supported Samsung smartphone. Some
features are not available while sharing power.
- From the smartphone, open the Notification panel and, tap Wireless PowerShare to enable this feature.
- With the smartphone face down, place the device on the back of the smartphone to charge. A notification sound or vibration occurs when charging begins.
NOTE Wireless PowerShare works with most Qi-Certified devices. Requires minimum 30% battery to share. Speed and power efficiency of charge vary by device. May not work with some accessories, covers, or other manufacturer’s devices. If you have trouble connecting or charging is slow, remove any cover from each device. May affect call reception or data services, depending on your network environment.
For best results when using Wireless PowerShare, please note:
- Remove any accessories or cover before using the feature. Depending on the type of accessory or cover, Wireless PowerShare may not work properly.
- The location of the wireless charging coil may vary by device, so you may need to adjust the placement to make a connection. When charging starts, a notification or vibration will occur, so the notification will help you know you’ve made a connection. During charging, do not move or use either device.
- Call reception or data services may be affected, depending on your network environment.
- Charging speed or efficiency can vary depending on device condition or surrounding environment.
- Do not use headphones.
Attach the wingtip
Before wearing the earbuds, be sure to attach the wingtips. Wearing earbuds
without wingtips may hurt your ears.
- Select the wing tip size that best fits your ear.
- Hold the wing tip for the left or right ear in one hand, and the corresponding earbud in the other.
- Hook the wing tip’s groove to the earbud’s fixation hook on one side and gently pull the wingtip to cover the earbud. Do not pull the wing tip excessively when you attach or detach it because it may tear.
- Follow the same procedure for the other earbud.
Wear the earbuds
Place the earbuds in your ears correctly for a comfortable fit.
- Select the right or left earbud, and insert the lower half (with the speakers) into the bottom part of the corresponding ear.
- Tuck the top half of the earbud (with the wingtip) in the upper part of your ear.
Adjust for a comfortable fit. The touch-sensitive sensor will detect that you are wearing the earbuds when you put them on and emit a sound.
Coupling earbuds
Should you lose one of the earbuds, you can buy a replacement and couple the
old and new earbuds together.
- Insert the earbuds into the charging case. The earbud battery indicator light will flash red to indicate that the earbuds are not coupled.
- Tap and hold the touch area on both earbuds for seven seconds or more. When the earbud battery indicator light flashes green and then turns off, the earbuds are coupled and ready for use.
Start using your device
To start using your earbuds connect them to your device.
Connect the earbuds to your phone
To connect your earbuds to a smartphone, install the Galaxy Wearable app on
the smartphone. You can download the app from the Galaxy Store or the Google
Play™ store.
Galaxy Wearable is compatible with select devices using Android 5.0 and later with at least 1.5 GB RAM. Supported devices may vary by carrier and device. Some features may not be available. For best results, connect with compatible Samsung Galaxy devices. Visit samsung.com/us/support/owners/app/galaxy- wearable-watch for a list of compatible smartphones.
-
Open the charging case to enter Bluetooth pairing mode.
• You can also enter Bluetooth pairing mode while wearing the earbuds by press and holding the left and right touch areas on the earbuds at the same time. -
From the Apps screen of the smartphone, tap Galaxy Wearable. If necessary, update the app to the latest version.
-
Tap Get started and select your device.
-
Follow the prompts to complete the connection.
NOTE When connecting earbuds with a mobile device that has a Samsung account, the earbud pairing information will be synced to other devices that use the same Samsung account.
Disconnect
1. From Galaxy Wearable, tap ⇔ Menu.
2. Tap Disconnect.
Use touch controls
Use the touch area on the earbuds to control your music, phone calls, and
other useful shortcuts without getting out your phone.
Single tap
Lightly tap the touchpad one time for the following options:
- Play a track.
- Pause a track.
Double-tap
Quickly tap the touchpad two times for the following options:
- Play the next track.
- Answer or end a call.
- Place the current call on hold and answer a second incoming call.
- Switch between a current call and a call placed on hold.
Triple tap
Quickly tap the touchpad three times for the following options:
- Play previous track.
- Start the current track over at the beginning.
Touch and hold
Touch and hold the touchpad for the following options:
- Activate a custom shortcut. See Touch controls for more information.
- Decline a call.
- Turn the microphone on or off during a call.
- Retrieve a call placed on hold after ending the current call.
Music features
Once connected to your phone, when you play music, videos, or other audio files the sound will come through your earbuds. You can use the touch area on the earbuds to control how the audio is played.
Volume controls
You can adjust the volume by tapping and holding the touch area on your
earbuds.
- From Galaxy Wearable , tap Touch controls.
- Tap Left or Right and choose Volume down or Volume up. Once you have set this option for one earbud, the other will be automatically set.
Adjust the volume
Once the touch control options are set, you can adjust the volume without
using your phone.
- To turn the volume up, tap and hold the right earbud touch area until the volume has been increased to the desired amount.
- To turn the volume down, tap and hold the left earbud touch area until the volume has been decreased to the desired amount.
Playback controls
Navigate your playlist using the touch area on your earbuds.
| Single tap | Play/pause |
|---|---|
| Touch and hold | Launch supported music apps |
| Double-tap | Next song |
| Triple tap | Previous song |
Call features
Answer and control calls using your earbuds.
Incoming calls
When you receive a call while wearing the earbuds, the ringtone will play in
the earbuds. You can also configure your earbuds say the phone number or name
that is saved in your contacts of the incoming call.
- From Galaxy Wearabl e, tap Read notification aloud.
- Tap Incoming cal l to enable voice notifications.
- Tap See all and tap the drop-down menu.
- Tap All > Contacts to enable this feature.
Phone controls
Manage calls by tapping the touch area on your earbuds.
| Touch and hold | Reject a call/mute |
|---|---|
| Double-tap | Answer/end |
Call waiting
If you receive an incoming call while already on a call, the earbuds will emit
a sound.
- To reject the incoming call and stay on the current call, touch and hold the touch area on either earbud.
- To answer the incoming call and place the current call on hold, double-tap the touch area on either earbud.
- To switch between the current call and one placed on hold, double-tap the touch area on either earbud.
Galaxy Wearable app
Battery level
The Galaxy Wearable app displays the battery level for the earbuds and charging case at the top of the screen. When the battery is low a notification will display on your phone.
- Open Galaxy Wearable to view the battery percentage for the earbuds and charging case.
Noise-canceling
Enable the noise-canceling feature to reduce unwanted ambient sounds.
- From Galaxy Wearable, tap Active noise canceling to enable this feature.
Equalizer
Select from six different equalizers presets for a unique sound.
- From Galaxy Wearable, tap an option under Equalizer to change the sound settings.
Touch controls
Tap the touch area on your earbuds to activate different controls. The left
and right earbuds can be assigned different shortcuts.
TIP If the touch controls become unresponsive, place the earbuds in the charging case for seven seconds or more to restart them.
Customize touch controls
Set the shortcuts for each earbud.
- From Galaxy Wearable, tap Touch controls.
- Tap Left or Right and tap an option to set the touch control for that earbud:
• Active noise canceling: Activate the noise-canceling feature. For more information, see Noise canceling.
• Voice command: Activate Bixby.
• Volume up or Volume down: The right earbud is volume up, and the left is volume down. Once one has been set, the other will automatically update to the volume control option.
• Spotify: Launch the Spotify app.
Block touch controls
Prevent unintended actions by turning off the touch controls.
- From Galaxy Wearable , tap Touch controls.
- Tap Block touches to disable the touch control feature.
Read notifications aloud
Have text notifications from your phone read aloud on your earbuds.
- From Galaxy Wearable, tap Read notification aloud.
- Tap On to enable the feature.
• To hear notifications from your phone on your earbuds, even while using your phone, tap Read aloud while using your phone.
• To choose which app notifications are read aloud, tap an app in the list. You can tap See all for additional apps. Sort the list by Read aloud, Not read aloud , and All.
Advanced
Explore the earbud’s advanced features.
Bixby voice wake-up
Activate Bixby by saying “Hi Bixby” while wearing your earbuds. Not all Bixby
functions are available. This option is available only when connected to
Bixby-enabled Samsung phones.
- From Galaxy Wearable, tap Advanced > Bixby voice wake-up to enable the feature.
Seamless earbud connection
Switch quickly to nearby devices without disconnecting your earbuds or turning
on pairing mode. This works with any nearby device that’s signed in to your
Samsung account, even if it has never paired with your earbuds before.
- From Galaxy Wearable, tap Advanced > Seamless earbud connection.
- Tap On to enable the feature.
Labs
Explore the earbud’s experimental features.
Gaming mode
Minimize the audio delay for vivid, synchronized gaming sound. For the best
experience, keep your earbuds near your phone. This feature is only available
when connecting with a Samsung mobile device.
- From Galaxy Wearable, tap Labs.
- Tap Gaming mode to enable the feature.
Relieve pressure with ambient sound
This feature can prevent a feeling of stuffiness or compression when you’re
not using active noise canceling.
- From Galaxy Wearable, tap Labs.
- Tap Relieve pressure with ambient sound to enable the feature.
Find my earbuds
If you misplace your earbuds, your phone can help you find it.
1. From Galaxy Wearable, tap Find my earbuds.
2. Tap ****Start. The earbuds will start beeping.
3. Tap Stop once you have located your earbuds.
General
Configure your earbud’s general settings.
Reset
Reset settings to their factory default values and delete all data.
- From Galaxy Wearable , tap Reset
- Tap Reset again to confirm and start the reset.
Earbuds software update
Update your earbud’s software for the latest features.
- From Galaxy Wearable, tap Earbuds software update.
- Download and install: Check for software updates for your earbuds.
- Last update: View information about the last software update.
Tips and user manual
Learn useful tips to get the most out of your device, and view the user manual.
- From Galaxy Wearable, tap Tips and user manual.
- Swipe right and left to view useful tips.
- Tap the User manual to view the manual.
About earbuds
View information about the earbuds.
- From Galaxy Wearable, tap About earbuds for the following information:
- Device name, model, and serial number
- Legal information
- Software information
- Battery information
Learn more
Videos
youtube.com/samsungcare
Tips
samsung.com/us/support/tips
Samsung Care
samsung.com/us/support
Talk to an agent
Contact us on Facebook Messenger
Find us on Facebook
Follow us on Twitter
Legal information
READ THIS INFORMATION BEFORE USING YOUR MOBILE DEVICE.
Arbitration Agreement – This Product is subject to a binding arbitration
agreement between you and SAMSUNG ELECTRONICS AMERICA, INC. (“Samsung”). You
can opt-out of the agreement within 30 calendar days of the first consumer
purchase by emailing optout@sea.samsung.com
or calling 1-800-SAMSUNG (726-7864) and providing the applicable information.
The full Arbitration Agreement, Standard One-year Limited Warranty, End-User
License Agreement (EULA), and Health & Safety Information for your device are
available online at https://www.samsung.com/us/Legal/Gear-HSGuide.
Samsung Knox
Samsung Knox is Samsung’s security platform and is a mark for a Samsung device tested for security with enterprise use in mind. Additional licensing fees may be required. For more information about Knox, please refer to: samsung.com/us/knox.
Restricting children’s access to your mobile device
Your device is not a toy. Do not allow children to play with it because they
could hurt themselves and others, or damage the device. Keep the device and
all its parts and accessories out of the reach of small children.
Interference from Magnets
WARNING: Potential Interference with Medical Devices from Magnets. The device contains magnets that may interfere with medical devices such as pacemakers, implantable cardioverter defibrillators, or insulin pumps. IF YOU ARE A USER OF ANY OF THESE MEDICAL DEVICES, PLEASE CONSULT WITH YOUR PHYSICIAN.
Samsung Electronics America, Inc.
Address: 85 Challenger Road Ridgefield Park New Jersey 07660
Phone: 1-800-SAMSUNG (726-7864)
Internet: samsung.com
©2020 Samsung Electronics America, Inc. Samsung, Samsung Galaxy, and Samsung
Health are all trademarks of Samsung Electronics Co., Ltd.
Other marks are the property of their respective owners.
Some multimedia (audio/video) files contain Digital Rights Management (DRM)
technology to verify you have the right to use the files. Preloaded apps on
your device may not be compatible with DRM-protected files.
Screen images are simulated. The appearance of the device may vary.
The actual available capacity of the internal memory is less than the
specified capacity because the operating system and default applications
occupy part of the memory. The available capacity may change when you upgrade
the device.
Please check with your service provider to verify qualifying
services/features.
References
- 📧optout@sea.samsung.com?subject=Arbitration
- Support Home | Official Samsung Support US
- Galaxy Wearable
- Support Home | Official Samsung Support US
- Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
- Support Home | Official Samsung Support US
- Support Home | Official Samsung Support US
- Terms and Conditions for Mobile
- Terms and Conditions for Mobile
- Keep your Galaxy device at its normal operating temperature
- Galaxy Wearable
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>