cordinate BT013 Bluetooth Earbuds with Charging Case User Manual
- June 9, 2024
- cordinate
Table of Contents
cordinate BT013 Bluetooth Earbuds with Charging Case
Get to know your earbuds
CHARGING
Before initial use, make sure the earbuds and case are fully charged.
Charging the case:
Charge the case using the included USB cable. The white LED lights will flash
while charging and then remain steady when fully charged.
Charging Case Battery Levels
Charging the earbuds:
Place the earbuds in the case to begin automatic charging. The red light on
the earbuds will illuminate while charging and turn OFF when charging is
complete.
POWER ON & CONNECT
- Earbuds power ON and automatically pair when removed from the charging case.
- On your device, open the Bluetooth® function, search for “Cordinate TWS” and tap it to connect both earbuds with your mobile device. If the earbuds fail to connect, insert both earbuds into the charging case and repeat the previous steps.
POWER ON/OFF
- Power ON
- Method 1: Remove the earbuds from the charging case.
- Method 2: Press and hold the touch sensor on both earbuds for approximately three seconds or until you hear four ascending tones, indicating the earbuds have been turned ON.
- Power OFF
Press and hold the touch sensor for approximately five seconds or until you hear four descending tones, indicating the earbuds have been turned OFF.
AUDIO CONTROLS
-
Play/pause
Single tap either earbud’s touch sensor once to play or pause audio. -
Next track/previous track
Double tap right earbud’s touch sensor to skip to the next track. Double tap left earbud’s touch sensor button to skip to the previous track. -
Volume control
Press and hold the touch sensor on the right earbud to increase volume. Press and hold the touch sensor on the left earbud to decrease volume.
PHONE CONTROLS
-
Answer/end call
Double tap either earbud’s touch sensor to answer an incoming call or end a current call. -
Reject incoming call
Touch and hold either earbud’s touch sensor to reject call.
VOICE ASSISTANT
- Activate voice assistant
Triple tap either earbud’s touch sensor to hear a beep, indicating voice control has been activated on your device.
TROUBLESHOOTING
Earbuds fail to connect with cell phone or there is no sound in left or right earbud.
- Remove both earbuds from the charging case. Press and hold their touch sensors for five seconds in power OFF mode. Do not release your fingers until the LED lights on both earbuds flash red and blue alternately. Then, double press the right earbud’s touch sensor. Both earbuds will begin auto pairing after three to five seconds and the light on one earbud will flash blue while the light on the other earbud will flash red and blue alternately.
- Delete the pairing name from the mobile device’s Bluetooth pairing list.
- On your mobile device, search for “Cordinate TWS” and tap it to connect both earbuds with your device.
- If the earbuds fail to connect, place both earbuds into the charging case and repeat the previous steps.
When the LED light of both earbuds flashes red and blue alternately, double
press the right earbud’s touch sensor.
NOTES
- If the earbuds are not used for more than two weeks, charging is recommended.
- Use a 5V DC, 1A charger made by a qualified manufacturer.
- Keep distance between your device and the earbuds at 33ft. or less and make sure nothing is blocking the signal path.
- Earbud functions may operate differently based on the protocols supported by different wireless devices.
- Do not clean the earbuds with harsh chemicals or strong detergents.
- Follow enclosed instructions. If any damage or danger occurs due to improper use, responsibility shall be that of the operator.
WARNINGS
- Choking hazard. This product includes small parts and may present a choking hazard or cause other injury to small children. Keep away from small children.
- Medical device interference. This product contains magnets, components and radios that emit electromagnetic fields and may interfere with medical devices. Consult your physician and medical device manufacturer for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device and the earbuds and charging case. Manufacturers often provide recommendations on the safe use of their devices around wireless or magnetic products to prevent possible interference. If you suspect the earbuds and charging case are interfering with your medical device, stop using them.
- Do not listen at high volume levels for long periods of time, as this may permanently damage your hearing. Background noise, as well as continued exposure to high volume levels, can make sounds seem quieter than they actually are.
- Do not attempt to replace earbud or charging case batteries yourself, as this may damage the batteries, which could cause overheating and injury.
- Do not disassemble or modify your earbuds for any reason.
- Do not overcharge earbuds or charging case to avoid risk of fire.
- Do not expose earbuds or charging case to extreme temperatures (below 0°C/32°F or above 45°C/113°F). It could cause damage, reduce battery life and lessen the lifespan of your earbuds.
- Do not place LED lights close to eyes.
- Do not use earbuds during a thunderstorm, as it can cause a serious malfunction and increase the risk of electric shock.
FCC STATEMENT
Suppliers Declaration of Conformity | Model #: 71242, 71452, 71453 | Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114 | www.byjasco.com
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee interference will not occur in
a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no- collocation statement.
FCC ID: 2ATNH-BT013
The Bluetooth® word, mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Jasco Products Company LLC is under license. All brand names and products listed/ shown are trademarks or registered trademarks of their respective owners.
For product patent information, visit
www.byjasco.com/patents.
MADE IN CHINA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City,
OK 73114. This Jasco product comes with a limited-lifetime warranty. Visit
www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F,
Central Time.
Thank you for your purchase!
Register your product Receive exclusive deals and register your product. Scan code or visit byjasco.com/deals
Discover more innovative products at byjasco.com/CE
Like our product?
Leave a review on your favorite retailer website or
amazon.com
Having problems?
Let us know how we can help. Call
1-800-654-8483 between 7AM-8PM, M-F,
Central Time.