Audi 2022 RS6 User Guide
- June 3, 2024
- Audi
Table of Contents
Audi 2022 RS6
Introduction to Your A6
-
Upper Display
Touchscreen allows access to multiple features and vehicle functions, including: Radio, Media, Phone, Navigation, Phone Apps, * Vehicle, Settings and more. -
Lower Display
Touchscreen enables control of HVAC features and seating adjustments, as well as fingertip input of alphanumeric characters. Dedicated buttons above and below screen activate/deactivate specific vehicle functions. -
Audi Phone Box (not shown)**
Charge your compatible mobile device wirelessly in the console compartment. To use, position device with display facing up. Phone must be in direct contact with phone box surface. Calls will be made using the external antenna on the vehicle. Mobile device may also be charged by connecting it with an approved cable to one of the Audi music interface USB ports, and can be operated via the MMI display. Available on select models. See Owner’s Manual for proper placement. -
Volume Knob
Controls audio volume. Press to mute. Press and hold to turn MMI off. -
Steering Wheel Left Side Controls
-
Steering Wheel Right Side Controls
- Always pay careful attention to the road, and do not drive while distracted. Message and data rates apply.
- Requires a compatible smart device. See your Owner’s Manual for complete information about use of Audi Phone Box.
Upper & Lower Display
Upper Display
Features and Controls
-
Display Area
Select function menus, apply settings and display content. When connected to Apple CarPlay® or Android Auto™, display will switch to mobile device operating system with associated functions and applications. To move icons, press and hold, then drag to desired location. To switch between menu pages, swipe left or right. To go back to the Home screen, simply press L). -
Quick Access
Return to Home screen or quickly switch between four selected menus. Press and hold an icon in the main display area to move the icon to the quick access bar. The bottom icon will be replaced by the new icon. The Home button cannot be moved. -
Status Display
The symbols in the status bar show information such as mobile devices connected, data connection, Bluetooth® activation, etc. -
Notification Center
To open the Notification Center, pull the status bar downward, or press – on the status bar. Status information and notifications are displayed. The ability to manage connected devices and personal profiles, set date and time, and set other content is also available. To delete notifications, press and drag to the right edge. -
Back (not shown)
Go back one step in the menu hierarchy. -
Touch Response (not shown)
Amount of haptic (touch sensitive) feedback necessary to activate icons can be adjusted in Settings Display and brightness MMI Touchscreen feedback. Audible response can be turned on and off.
Lower Display
-
Auto Start/Stop
Switches Start/Stop system on or off. The system checks if conditions are met before and during the “stop” phase and determines if the engine stops and how long it remains stopped. -
Lane Departure Warning (see Disclaimers)
Switches the lane departure warning on or off. Can detect lane marker lines within the limits of the system. It will warn you with corrective steering and steering wheel vibration if you are approaching a detected lane marker and it appears you will leave the lane. -
Garage Door
Opens the garage door opener function. Press if you are programming the garage door opener for the first time, then follow instructions in the Multi Media Interface (MMI). -
Sunshade
Press to adjust sunshade. Press and hold for convenience opening/closing. -
Head-Up Display
Press to show settings for the head-up display. -
On/Off
Press to switch upper display on or off. Pressing and holding this switch/icon turns both MMI displays on or off. -
Shortcuts
Pressing the Shortcut icon opens the shortcut bar, giving access to saved items like: radio stations, contacts and vehicle settings. To save an item as a shortcut, press and hold its text in the upper MMI until option Save as a shortcut appears. Touch shortcut option to send the item to the shortcut bar. Press and hold shortcuts to move or delete.
Driver Assistance Features
Cruise Control
To activate, pull the control stalk toward you to the ON position.
Set or Change Speed:
At your desired speed, press the SET button at the end of the stalk. The set
speed along with respective indicator light is shown in the driver information
system. There are several ways to change your speed:
- Accelerate or decelerate, then press the SET button again.
- Push the stalk up or down one level to increase/decrease speed in 1 mph increments.
- Push the stalk up or down two levels to increase/decrease speed in S mph increments.
- Hold the stalk up or down to increase/decrease speed; release when desired speed is reached.
Cancel/Resume:
- To cancel, press the brake pedal or push the stalk briefly away from you one detent to the CANCEL position.
- The indicator light will go off in the instrument cluster.
- To resume, pull the stalk toward you; you will return to your set speed.
Your most recently set speed remains in memory until you turn cruise control or the ignition off.
Adaptive Cruise Assist
If equipped, Adaptive Cruise Assist (ACA) – a combination of speed and
distance regulation – helps maintain the distance between the vehicle and
another vehicle driving ahead by accelerating and braking as necessary. Also,
if the vehicle is equipped with Lane Guidance, ACA will work to keep your
vehicle centered in the lane.
- To activate, set, change, cancel or resume cruising speed, follow the same instructions as listed above for standard cruise control.
To change the targeted distance to the vehicle ahead:
- Tap the rocker switch to display the current set distance.
- To increase or decrease the distance setting, tap the switch again toward+ or – .
Active Lane Departure Warning
Within the limits of the system, the Active Lane Departure Warning (ALDW)
gives an alert before the vehicle drives over the lane markings. The warning
takes place visually in the virtual cockpit and through the steering wheel via
corrective steering assistance or vibration. Press the ◄ button on the turn
signal stalk to turn ALDW on or off (system active: l!I, system on but
passive: l!I, system off.•••)
Lane Guidance
If the vehicle is equipped with Lane Guidance, the system can provide
continuous support to assist you in keeping the vehicle in the center of the
lane. Activate the feature by turning on the ACA function. Lane Guidance is
only available when the “Lane Guidance” option in the MMI display within the
ACA driver assistance options and ALDW is turned on. The color of the
triangular indicators reflect the system state of Lane Guidance ( system
active: Ori. system on but passive: Ori- system oft:
Note : ALDW and Lane Guidance are not substitutes for attentive driving.
You can always intervene. These systems are designed for highways and major
roads. Some conditions may deactivate them, such as no lane lines, lane too
narrow or wide, etc.
Driver Assistance Systems
There are three levels of driver assistance systems*: Maximum, Individual and
Basic. Maximum activates all available features. Individual allows you to
select an individual system. Basic activates only Audi pre sense and emergency
assist. To choose, press the Driver Assistance button on the center console.
Or, in the upper display, select Vehicle>> Driver assistance. Depending on
vehicle equipment, features may include:
- Intersection assist.
- Emergency assist.
- Distance warning.
- Audi pre sense.
- Side assist.
- Exit warning.
*Driver assistance features are not substitutes for attentive driving. See Owner’s Manual for further details and important limitations.
Automatic Climate Control
System Controls
The advanced Climate Control system is accessed in the lower display and
offers 4-zone heating and cooling, rear-seat control of the system and a
number of interior environment improvement features.
Driver and Passenger Controls
-
AUTO
Maintains your selected temperature by automatically regulating the temperature, fan speed and airflow. The A/C turns on automatically to condition and dehumidify the air. Changing the air distribution or fan speed will turn off the AUTO function. -
Seat Heating
Select one of three seat heating levels by pressing repeatedly. -
Seay Ventilation
Select one of three seat ventilation levels by pressing repeatedly. -
A/C
When illuminated, A/C is on. -
A/C Max
Quickest way to cool the cabin. It automatically returns to normal operation once desired temperature is achieved. -
OFF
Press repeatedly to adjust heat level. -
AUTO Recirculate
During recirculation, the air intake will close and interior air will be filtered and recirculated. In AUTO mode, recirculation will occur automatically based on air quality sensors and outside temperature. -
Defrost MAX (not shown)
Quickest way to defog/defrost the windows. Temperature should be set at 72°F (22°C) or higher. -
Rear Defrost (not shown)
When the engine is running, activates the electric rear window defroster. Depending on outside temperature, this will switch off after 10-20 minutes -
Temperature
Tap or slide to adjust temperature for either driver or passenger. -
Airflow
Choose any combination of airflow direction. -
Blower
Select one of six fan speeds. The blower should always run to prevent the windows from fogging, and to ensure continuous exchange of air inside the vehicle.
Additional Functions
Selecting ••• gives access to more cabin environment controls in the upper
display.
-
Customize Buttons
The buttons on either side of the••• button can be changed to a different climate control function. Press and hold the symbol for the desired function on the upper display for at least three seconds. A menu appears with two sections. Pull the icon to the left to assign the function to the left-hand button and to the right for the right-hand button. -
Steering Wheel Heating
Heats the steering wheel rim electrically. -
SYNC
Temperature, air distribution and blower strength on driver’s side is applied to all seat positions. SYNC can also be activated by “pinching” two fingers together between the temperatures shown on the lower display. -
REAR
Enables operation of the Climate Control system from the rear console. Press REAR again to exit this mode.
Residual Heat
Press and hold the Max Defrost icon for more than two seconds after the
ignition is switched off. Residual heat from the coolant is used to heat the
vehicle interior. Function switches off automatically after about 15 minutes.
www.myAudiIQ.com
Visit my AudiIQ to watch short tutorial videos demonstrating the features of
your new Audi.
Navigation
Setting a Destination
Your Audi MMI Navigation system plus* has capabilities to enhance your drive
with user-definable views, routing selections and more. Get started with
setting destinations and discover more as you become familiar with the
interface.
*MMI Navigation plus (available on select trim lines) depends on signals from the worldwide Global Positioning Satellite network. The vehicle’s electrical system, and existing wireless and satellite technologies, must be available and operating properly for the system to function. The system is designed to provide you with suggested routes in locating addresses, destinations and other points of interest. Changes in street names, construction zones, traffic flow, points of interest and other road system changes are beyond the control of Audi of America, Inc. Complete detailed mapping of lanes, roads, streets, toll roads, highways, etc., is not possible, therefore you may encounter discrepancies between the mapping and your actual location. Please rely on your individual judgment in determining whether or not to follow a suggested MMI Navigation plus route.
Intelligent Search
With intelligent search, you can enter the search terms for a navigation destination in any order and all at once. You can search for points of interest, contacts, previous destinations, received destinations and routes or favorites. An Audi connect* subscription is required for internet-based searches.
-
From the home menu Ci , select Navigation on the touchscreen display.
-
Touch the Search icon.
This will display shortcuts for common destinations, e.g., Parking, Restaurant, Gas station, etc. -
Use the touchscreen display to enter or write the address or name of the location using the keyboard or handwriting recognition. You can also enter generic terms like “hardware store” or “bakery.” You do not have to wait for letters and numbers to be recognized before continuing.
-
Locations matching the data entered will be displayed. Choose from the available options.
-
Select Start to begin route guidance.
Finding a Destination Using an Online Search Engine Provider
- Select Navigation >> ,o >> G.
- Enter search terms into the input field until the desired destination appears. To narrow search further, press on the displayed suggested terms.
- Press the desired destination, then press Start.
Audi connect subscription required for internet-based searches. See your USA Warranty & Maintenance Booklet for details. Always pay careful attention to the road, and do not drive while distracted. Audi connect should only be used when it is safe and appropriate. Audi connect services and features are optional, provided with the support of authorized affiliated and third party service providers, and may require additional subscriptions with separate terms and conditions. Available on select models. Certain services collect location information, see Terms of Service for information about how to disable and for other details. Connect services are subject to technologies remaining commercially available, and such services are not guaranteed.
Intelligent Search with Voice Recognition
- Short press the Voice Recognition button <<•{: on the steering wheel or on the Intelligent search screen of the MMI touch display to activate voice recognition. Speak commands after the beep.
- Say an address, Point of interest or generic category of a location (e.g., library, coffee shop, etc.) you wish to find.
- Choose the destination from the displayed list.
Saving Favorites and Shortcuts
Destinations can be saved as favorites or shortcuts in order to quickly access
them for future trips.
- .Press and hold displayed destination until the Option menu appears.
- Choose Store as favorite or Save as shortcut.
- A solid white star * indicates it is stored as a favorite.
To Access a Favorite
From Home screen Ci >> Navigation >> BB >> Favorites.
To Access a Shortcut
Select o:P located on the lower display. Saved shortcuts will be displayed.
Press the respective tile.
Navigation Settings
With the upper display in map view, press 0 to access and modify various navigation settings. Available settings include:
- Map settings.
- Voice guidance.
- Route criteria.
- Route information.
- Personal route assistance.*
- Presentation mode.
*With this feature activated, the system will record your favorite driving routes and make navigation suggestions based on your known driving habits. Personal routes and destinations can be deleted from the personal route assistance sub-menu.
Bluetooth®, Voice Recognition & Media
Bluetooth® Technology
Initial Setup
Once a compatible phone is paired, it will reconnect each time you start the
vehicle.* Your contact list will automatically synchronize, allowing you to
access contacts, and make and receive calls through the Infotainment system.
Bluetooth is not available when Apple CarPlay® is active.
To pair a compatible phone:
- Turn ignition on with vehicle in Park.
- Activate your phone’s Bluetooth.
- Open the Bluetooth menu on your phone, ensure “Audi MMI XXXX” (last four digits of VIN) appears as an option.
- Select Phone on the upper display to view available Bluetooth devices.
- Select Connect mobile device.
- Select your device from the device list. Press the Refresh icon O if the device is not displaying.
- Select Pair on your device once the PIN on your phone matches the one generated by the MMI. This confirmation step pairs your phone.
- Select Allow on your device to sync contacts.
Open the Bluetooth submenu CD on your device and enable Show Notifications, Sync Contacts and Apple CarPlay for iOS devices.
Some devices may require a selection to allow access to the address book. Some
phones may require a response to automatically connect upon re-entering the
vehicle. Once paired, the Bluetooth symbol appears on the upper display status
bar along with network strength bars and will be displayed whenever a paired
phone is connected
to the Infotainment system. Always pay careful attention to the road, and do
not drive while distracted.
Switch Between Paired Phones
A primary and secondary phone can be paired to the vehicle. To swap the
primary/secondary order, from the vehicle touch display select Phone >> qJ .
The secondary will now be primary and vice-versa.
Voice Recognition
Enable online speech dialog system:
- On the M MI, select Settings.
- Select General.
- Select Speech dialog system.
- Consent to speech dialog system online recognizer, provide consent by sliding button to the right.
- A short press of the Voice Recognition button <<•{: on the multifunction steering wheel will activate MMI voice recognition. You can control audio, navigation and telephone functions with voice recognition commands, such as “Play FM 103.5.”
- When a compatible device is connected, a long press of the Voice Recognition button <<•{: will enable voice recognition with your phone’s digital assistant. Use commands such as “Call Mary Smith, mobile” or “Call last number dialed.”
Operating the MMI Display With Voice Commands
To operate the voice recognition system using voice commands, use the MMI Display to select Settings>> General
- Speech dialog system >> Activate the speech dialog system with “Hey Audi”.
- Say the activation phrase “Hey Audi” together with the desired command such as “Hey Audi, call John Smith”.
To switch voice recognition system off:
- Press and hold the Voice Recognition button <<•{: on the multifunction steering wheel. You can also say “Cancel” or press Cancel on the touch display.
Media
The Multi Media Interface (MMI) can access multiple media sources, including compatible Bluetooth-connected devices, USB-connected devices, onboard Radio/Satellite sources, on line media (via Wi-Fi hotspot) and SD cards. Bluetooth streaming is not available when Apple CarPlay® is active. To access a media source:
- Select Media on the upper display.
- Select Source and choose from the available options.
To connect additional mobile devices (after two phones are paired):
- Select Media and then Source.
- Select Connect external device.
- Activate the Bluetooth menu on the external device.
- Select New connection and select from available Bluetooth devices displayed. Press the Refresh icon O if the device is not displaying.
- A PIN will be generated. Confirm the PIN on your mobile device.
TEXT 2022A6 to 38981
Learn more about feature operation within your Audi. Always pay careful
attention to the road, and do not text and drive. Message and data rates
apply. Call your Audi Technologist to learn more. 1-855-750-TECH (8324)
Phone Apps
Audi Smartphone Interface
You can connect your compatible smartphone to the Multi Media Interface. Certain content on your phone will be adapted to the Infotainment system display and can be operated through the MMI controls.* This gives you easy access to your smartphone’s information, apps and voice recognition system through the MMI display. Apple CarPlay®
To connect:
- Turn ignition on with vehicle in Park.
- Make sure your iPhone* is unlocked and is running the latest version of iOS.
- Connect your iPhone with a manufacturer-approved cable to either USB port.**
- Respond to prompts as necessary from both Audi MMI and your iPhone. To connect to Wireless Apple Carplay, select “Enable Wireless CarPlay” on your iPhone. Please note that your iPhone will have to be unlocked within the past hour in order to use Apple CarPlay with a USB to Lightning cable.
When connected:
- Long press the Voice Recognition button on the steering wheel to activate Siri”.
- Make and receive calls.
- Send and receive text messages.
- Set reminders.
- Get turn-by-turn navigation.
- See recent places.
- Listen to music apps.
After the initial connection of an iPhone with Apple CarPlay, the iPhone will automatically connect to Apple CarPlay during the next ignition cycle when the iPhone is connected by USB or Wi-Fi. Always pay careful attention to the road, and do not drive while distracted. Not all features are available on all operating systems. Message and data usage rates apply. These features require a compatible device, updated operating system and mobile apps. See mobile device and opp providers for terms and privacy. Apple CarPlay is a trademark of Apple Inc. Non-certified cables may not support data transfer or maintain a reliable connection. Some MMI functions may not be available when Apple CarPlay is active. Refer to www.apple.com/ios/carplay/ for additional information.
Features
Apple CarPlay features Siri Voice Control. Siri must be enabled on the device to activate Siri features.* There are two ways to activate Siri:
- Press and hold the Voice Recognition button <<•{: on the multifunction steering wheel until you hear the tone, which activates Siri.
- Press and hold the Home button on the touchscreen display.
- Home : Functions include:
- Return to the Apple CarPlay home screen or to the Apple CarPlay Dashboard.
- Long press activates Siri.
- Phone : Siri can help you make calls, return missed calls and listen to voicemail.
- Maps : Activate Siri to assist with turn-by-turn directions, traffic conditions and estimated travel time. Say “Navigate to” and the destination.
- Messages : Siri can send, read and reply to your text messages for you.
- Press the Audi MMI button to return to the Audi MMI system. Press the Apple CarPlay button to go back to the Apple CarPlay interface.
Additional apps available to stream music include Pandora, iHeartRadio and Spotify. Audio from Bluetooth connected devices is handled through Apple CarPlay. When Apple CarPlay is active, Bluetooth connection via the MMI is disabled. To re-establish Bluetooth audio, select Phone menu >> select Audi MMI >> select Media >> Source >> select your device from the list.
Android Auto™
To connect a compatible device:
- Make sure your Android phone is running the most current operating system.
- Ensure Bluetooth and Wi-Fi are turned on.
- You must have an active data plan.
- Connect your phone to the vehicle’s USB port via a USB cable.*
- Respond to prompts as necessary from both Audi MMI as well as your phone. If your phone prompts you, then download the Android Auto app from the Google Play Store or update to the newest version of the app.
When connected:
- Long press the Voice Recognition button <<•{: on steering wheel to activate Google Assistant or say “Hey Google” to get started.
- Make and receive calls.
- Send and receive text messages.
- Set reminders.
- Get turn-by-turn navigation.
- See recent destinations.
- Listen to music apps.
The phone will automatically connect to Android Auto during the next ignition cycle when connected by USB. Some MMI functions may not be available when Android Auto is active. Refer to www.android.com/auto/ for additional information. Non-certified cables may not support data transfer or maintain a reliable connection.
Features
- Microphone : Google Assistant can be activated with a long press of the microphone on the touch display or by using touch display commands that work with available apps. Google Assistant can also be activated with a long press of the Voice Recognition button <<•{: on the multifunction steering wheel.
- Navigation : Predictive navigation provides turn-by-turn directions, traffic conditions and estimated travel time. Android Auto can predict where you want to go next based on your calendar and recent destinations.
- Phone : Listen and reply to text messages, make calls or check your voicemail.
- Home Screen: Takes you back to the home screen of Android Auto.
- Music and Audio : Use your touchscreen to gain access to your favorite artists, songs and playlists. * Android Auto lets you stream from apps such as Pandora, Spotify and iHeartRadio.
- Vehicle Functions: Use it to return to the Audi MMI system.
*Always pay careful attention to the road, and do not drive while distracted. Not all features are available on all operating systems. Message and data usage rates apply. These features require a compatible device, updated operating system and mobile apps. See mobile device and opp providers for terms and privacy. Google, Android, Android Auto, Google Maps and other marks are trademarks of Google LLC. To use Android Auto on your car display, you’ll need an Android phone running Android 6. 0 or higher, an active data plan, and the Android Auto opp.
Wireless Apple CarPlay and Wireless Android Auto
To connect:
- Switch on the Bluetooth function and Wi-Fi on your phone and make sure you are on the Bluetooth menu when connecting your phone to the Audi infotainment.
- Select Phone apps on the Audi MMI.
- Select To connected devices.
- Select New connection.
- Select your phone from the list of devices.
- Follow prompts in the MMI display and on your phone.
Profile, Wi-Fi, Ar11azon Alexa & my Audi
Personal Profiles
Profiles retain seating, HVAC, shortcuts, etc. in memory. This is useful if multiple people share the same vehicle and each person would like to use his or her individual vehicle settings. To set a profile in the MMI, select Set up now from the configuration wizard and follow the instructions on the touchscreen. Once the User profile has been activated and saved, you have the option to Rename, Copy or Reset your personal profile.
- Changes to vehicle settings are automatically activated when the ignition is turned off.
- The active profile is assigned to the keyfob currently being used.
- If the vehicle is unlocked with a vehicle key, the last active profile will be loaded.
- A guest profile can be selected to modify settings without changing other User profiles.
- To choose a profile without changing keyfobs, press Select user from the main menu, then select the User Name to be applied.
Wi-Fi Settings
With an Audi connect trial or an Audi connect PRIME or PLUS subscription, you can connect to the Internet using the Wi-Fi hotspot in the vehicle. Audi connect PRIME includes Basic Wi-Fi which supports audio streaming and email. Audi connect PLUS includes full-speed Wi-Fi which supports video streaming. Up to eight compatible devices can be connected at one time. The ignition must be turned on.
Setup
- From the home menu LJ , select Settings.
- Select Connection settings.
- Select Wi-Fi.
- Select Activate.*
- A random password is set in the MMI at the factory. The password should be changed in the settings to something secure yet memorable.
- When Wi-Fi is switched on, the MMI Wi-Fi hotspot is active and visible to other devices. In Wi-Fi settings, you can switch visibility on or off.
- To use Wi-Fi, you (or your dealer) must activate a trial plan, or you must purchase a PRIME/PLUS subscription. Plans can be activated in the myAudi marketplace found in the myAudi mobile application. Some features are only available when the vehicle is paired to a registered myAudi account and the myAudi mobile application is installed on a compatible device.
Amazon Alexa
With Alexa, you can ask to play music, hear the news, check the weather, control smart home devices, and more. Alexa is available in your vehicle with a trial or paid Audi connect Prime subscription. Once the Audi brand specialist has completed the Audi connect key user setup: Before setting up Amazon Alexa, confirm that the Speech Dialog System in your Audi is enabled.
- From the home menu, Go to Settings >> General >> Speech Dialog System.
- Select Activate the speech dialog system with “Hey Audi”.
- Select Consent to online speech recognizer >> I accept the conditions and agree to the usage of my data (see EULA).
To set up Amazon Alexa:
- From the Home Screen LJ select User.
- Select Add User.
- Select Log In Now.
- Enter my Audi email and password, select Log In.
- Pop ups may occur. Select your personal preferences to continue.
- From the Users menu select the desired User.
- Select Connect to Amazon Alexa.
- Select YES, I agree for Amazon end user agreement.
- A QR code and a unique six-character pin will appear. Aim your smartphone camera at the QR code. A link to the Amazon login site will appear on your smartphone. If requested, enter the pin from the display.
- Once the User is connected to Amazon, Alexa is ready to use.
Alexa will remain active until you log out of the my Audi account, or the Alexa connection is terminated. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Requires trial or paid Audi connect subscription complete with Amazon Alexa. Certain Alexa functionality is dependent on smart home technology.
**myAudi Mobile App Connectivity*
The myAudi app has helps to personalize your Audi A6 experience with a suite
of smart services. Once you set up a myAudi account and an Audi brand
specialist has completed the Audi connect key user setup, you can then log in
from your A6 via the MMI.
To log in:
- From the home menu, select User.
- Select my Audi login.
- Enter your my Audi Username and Password, press Login.
- An Amazon Alexa prompt may appear if you have Audi connect prime subscription. At the Amazon Alexa login, select Yes or No. If Yes, see the Amazon Alexa section above.
- Your myAudi account will now be connected.
- From the myAudi mobile application, select the Vehicle icon on the bottom left. Scroll down to the “myAudi marketplace” section >> Click on the Shop button to enter the marketplace >> View eligible plans for your vehicle and select the plan you would like.
*Certain myAudi app features require an Audi connect trial or a PRIME/PLUS plan. standard data rates may apply.
Indicator Lights
For additional information on indicator lights, refer to your vehicle’s Owner’s Manual.
Audi Customer Support800-822-2834
The information within this guide must be used in conjunction with the
information in the Audi Owner’s Manual. You should refer to your vehicle’s
Owner’s Manual, and Infotainment System Booklet for all information and
warnings, and feature limitations. Always pay careful attention to the road
and do not drive while distracted. Some Infotainment features can only be
accessed and operated when the vehicle is standing still. © 2022 Audi of
America, Inc. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>