Audi NEMA 14-50 Home EV Charging User Guide
- June 4, 2024
- Audi
Table of Contents
Audi NEMA 14-50 Home EV Charging
For the best EV ownership experience, Audi recommends customers reach out to trusted local licensed electricians that are properly trained, certified, and insured to install a NEMA 14-50 outlet on a 240 volt, 50 amp circuit for AC Level 2 home charging. Installation must comply with local electrical and building codes. The overview below may be provided directly to your certified installer.
What you will need
NEMA 14-50 Specifications
- Circuit Breaker 50 Amp
- Voltage Single Phase, 208-240 Volt, 60 Hertz
- Outlet Type High quality, Industrial Grade NEMA 14-50 receptacle
- Conductors. 6 AWG recommended, Copper wires only (Upsized wiring for installations over 150 feet)
- Weather Protection Install NEMA 3R (or higher) weather-resistant enclosure
- Ventilation. Not required
- Service Disconnect ..Not required
- Ground Fault Circuit Interrupter Not required
How & Where to Install
The location of your vehicle’s charge port will vary based on model. Outlet
placement should take charger mounting and cable length into consideration.
Based on the orientation of the outlet’s ground pin, you can plug in your
charge cable accordingly.
- Recommended Installation: Ground on top
- Optional Installation: Ground on bottom
03 At-Home Vehicle Charging Made Easy
Discover Qmerit
Additional Support
Audi EV Customer Support 844-573-8766
Monday–Friday, 10am–7pm (ET)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>