Audi UTR2R Traffic Recorder User Guide

: June 5, 2024
: Audi

Audi UTR2R Universal Traffic Recorder User Guide

Please Read First

General Product Information

Ensure that only the original parts included in the scope of delivery are used during installation of the Universal Traffic Recorder (AUDI UTR). Installation should be carried out by an AUDI partner in order to ensure that the system is installed correctly. In addition, the installation must be carried out in accordance with the available AUDI Genuine fitting instructions.

Read the manual carefully before the initial activation of your AUDI UTR.

Safety Notes

To prevent the driver from becoming distracted, ensure that the Smartphone, the AUDI UTR and the associated app are not operated during the journey.

Before beginning each journey, ensure that all occupants agree to audio recording by the AUDI UTR and that the use of the AUDI UTR complies with the legal requirements in the respective country. Please find out in advance if the use of UTR is allowed in your country and whether there are any restrictions regarding the use of any image and video data recorded. Legal requirements must always be complied with.

AUDI AG has no access to the data obtained using the AUDI UTR or to the app and any data saved on the customer’s smartphone. In addition, the data is not saved in the customer’s vehicle.

The connection between the customer’s smartphone and the AUDI UTR is encrypted with WPA/WPA2 and can be altered at any time by the customer.

GPS data is recorded by the AUDI UTR in order to determine position and speed. The recorded data is deleted after a certain period of time – see the “Memory requirements” section of this manual.

Please observe and abide by all subsequent safety notes for your own safety.

Initial Operation

Please insert the micro-SD card into the device. It may only be inserted while the camera is turned off, as otherwise the data can be corrupted and a malfunction can occur.

Operation

Switching the ignition on automatically activates the “driving mode”, and the drive is recorded on the uSD card. Switching the ignition off automatically activates the “parking mode”, in which the vehicle is monitored by means of radar and a vibration sensor.

Coupling With A Smartphone

In principle, the UTR can be operated with the basic settings even without a connection to a smartphone. Acoustic signals keep you informed of the operating condition of the UTR.

To use the UTR with your smartphone (iOS or Android), please download the “AUDI UTR” app free of charge from the respective app store – iTunes (iOS) or Google Play Store (Android). In order to couple your smartphone with the UTR, activate the Wi-Fi function in your phone and connect to the hotspot (SSID) AUDIUTR. The default Wi-Fi password is: 1234567890.

Please change the default password immediately under AUDI UTR App>Settings>Wi- Fi>.

After changing your password, you must log in with the new password to the Wi- Fi hotspot (SSID) “AUDIUTR”.

You can find the detailed manual with an explanation of each function in the smartphone app under “Software”.

Time Setting

The UTR automatically sets the time and date using GPS time (UTC). Adaptation to your time zone and daylight savings time is done by synchronization with the time of your smartphone.

Now, your device is ready for use!

Operating Modes

Driving Mode

The driving mode is automatically started when you start the engine. Now, video files of one minute length each are being saved on the SD card.

Parking Mode

The parking mode is started when you turn off the ignition. In case of a shock to the car or a movement in front of the radar sensors, a 20 second video file is saved.

Event Recordings

When your car is shaken harder than the set value of the G-Sensor, separate video files are saved on the SD card in the folder “Event”. You will recognize the beginning of an event recording at the double beeping sound.

The sensitivity of the G-Sensor can be adopted in 5 levels.

Memory Allocation

The memory card is partitioned into separate areas (Driving, Parking, Event) by the system. In each partition, the oldest video file at a time is overwritten by the latest one. For that reason, please make a copy of the data when something happens. You can download the data to your smartphone via the UTR app, or remove the SD card (after turning off the device) to prevent overwriting the files. When you edit the SD card on the PC and then use it again with the camera, the SD card is formatted. This means that any existing videos will be erased!

Manually Switching On And Off

A short press of the ON/OFF button switches the device ON. To switch it OFF, please press and hold the button down longer (minimum 3 sec.).

AUDI UTR

Rear-View Camera

Memory Usage

Using a 8 GB uSD card in 2-channel mode (front and rear camera).

Parking mode (45%) 3.6 GB 15 minutes/46 files
Driving mode (25%) 2.0 GB 16 minutes/16 files
Events (30%) 2.4 GB 19 files

The recording time in minutes increases slightly with the exclusive use of the front camera. It is slightly reduced in racing mode.

Package Content

AUDI UTR – front camera
AUDI UTR – rear-view camera
Cable
8 GB uSD card, class 10, MLC
Operating instructions
Window film x 2

Imprint

All rights reserved. This documentation is protected by copyright. Subject to technical and optical changes as well as printing errors. The information contained in this document is subject to change at any time without prior notification. AUDI reserves the right to modify or improve its products and modify the contents without being obliged to inform any particular persons or organizations. The device specifications and the contents of the package may deviate from what is stated in this document.

Service

For current information or any questions regarding the use of your AUDI UTR, please consult the manual, which is available as a PDF file in the app under “Software”, or contact your local AUDI partner.

RF Specification

WiFi

2.4GHz band

Supported Protocol and Standard: IEEE 802.11b,
IEEE 802.11g, IEEE 802.11n

Frequency Range: 2400MHz ~ 2483.5MHz

Amount of Working channel: 1-11 (America , Canada) 1-13 (Korea, China, Europe)

Channel Bandwidth: 20MHz

Modulation: DSSS / CCK / OFDM

Output Power: 10mW / MHz 이하 (Korea)
Less than EIRP 15dBm (General)

5.4GHz band

Supported Protocol and Standard : IEEE 802.11n, IEEE 802.11ac,

Frequency Range : 5753MHz ~ 5815MHz

Amount of Working channel : 151 / 155

Channel Bandwidth : 40MHz / 80MHz

Modulation : OFDM

Output Power : 2.5mW / MHz 이하 (Korea)
Less than EIRP 30dBm (General)

Radar

Frequency Range : 24.200MHz

Modulation : FMCW

Output Power : Less than EIRP 20dBm (Korea)
Less than EIRP 13dBm (General)

General

Power Supply : DC 12V

Temperature Range : -40℃ ~ 85℃

Information of Regulations

EUROPE

Frequency table

Frequency band Wi-Fi : 2.4Ghz~2.484Ghz / 5.735Ghz~5.815Ghz
Frequency band Radar : 24.2Ghz
Max. radio frequency power Wi-Fi : 15dBm
Max. radio frequency power Radar : 13dBm

The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows:

Hereby, Mobile Appliance Inc. declares that the radio equipment type Wi- Fi/Radar is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.audi.com/generalinfo

United States

FCC ID : WHBUTR2 / WHBUTR2R

FCC Warning Statement

FCC Part 15.19
FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body.
South Korea

KC ID : R-C-MAI-UTR2 / R-C-MAI-UTR2R

CHINA

CMIIT ID : 2017DJ1243

Australia
New Zealand

R-NZ

Japan
Taiwan

Article 12

Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.

Article 14

The application of low power frequency electric machineries shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists.

RUSSIA

12VDC 0.5A
Manufactured by : Mobile Appliance Inc. / 401 Simin Daero, DonganGu, Anyang- Si, Gyeonggi-Do Korea
Manufacture Date : 12-2016
Country of Origin : South Korea

CANADA

Model : UTR 2.0 / UTR 2.0 Rear
IC : 22539-UTR2 / 22539-UTR2R
CAN ICES-3(B) / NMB-3(B)

IC Warning Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement
This equipment complies with IC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body.