Audi Scon2 Rear Seat Remote Control Convenience and Infotainment Functions Instructions
- June 5, 2024
- Audi
Table of Contents
Audi Scon2 Rear Seat Remote Control Convenience and Infotainment Functions
Instructions
Installation
SCON2 is placed in the cars like in bellow picture
Description
SCON2 is a Rear Seat Remote that can be used to control convenience and infotainment functions: air conditioner parameters or media playback, from the rear cabin.
CAUTION
- Prevent the Rear Seat Remote from coming into contact with liquids.
Note
- Please note that the Rear Seat Remote can only be used when the ignition is switched on and within range of the vehicle’s active Wi-Fi hotspot.
- Please note that the Wi-Fi connection does not enable you to use the Internet.
- Signals from Bluetooth devices and Wi-Fi hotspots within range of the vehicle can interfere with the in-car Wi-Fi services. If several Bluetooth devices and Wi-Fi hotspots are within range of the vehicle, the data transmission rates may be reduced, the connection may be lost and there may be restrictions to media broadcasts.
Rear Seat Remote: Overview
Menus and symbols
Applies to: vehicles with Rear Seat Remote
| Symbol / marking| Description
---|---|---
1| Applications| Selecting and calling up applications. Depending on your
vehicle’s equipment, you may be able to operate the following applications:
SEATS, LIGHTS, MEDIA, RADIO, TV, TELEPHONE, DEVICES, SOUND, SETTINGS,
TIPS
2| Air conditioner| Setting and operating the air conditioner for the rear
cabin
3| Quick access bar| Swipe downwards once with your finger from the top edge
of the screen to open the quick access bar. You can adjust the volume or
access the telephone functions during a phone call
4| Home screen| Calling up the home screen
5| Back| Go back one step
6| Media playback| Adjusting volume, accessing telephone functions during a
phone call
7| Select left/right for vehicle functions| Switching between different seats
Connecting with the MMI system
Applies to: vehicles with Rear Seat Remote
To use the Rear Seat Remote, you will need to connect it with the MMI system. Important: The ignition must be switched on.
- Secure the Rear Seat Remote in its holder The Rear Seat Remote will automatically connect to the MMI.
Bellow you can find Menus available for SCON2
CERTIFICATION INFORMATION
For EU / EFTA countries:
Radio Equipment Directive – Declaration of Conformity
Hereby, Harman Becker Automotive Systems GmbH declares that the radio
Equipment types SCON2 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet Address: (*1)
(*1) http://www.harman.com/compliance
WLAN: 2400 – 2483,5 MHz <20 dBm
WLAN: 5170 – 5835 MHz <20 dBm
Manufacturer:
Harman Becker Automotive Systems GmbH Becker-Goering-Strasse 16 76307
Karlsbad, Germany
FCC / ISED statement
Model: SCON2
FCC ID: T8GSCON2
IC: 6434A-SCON2
Modification statement
SCON2 has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment.
Interference statement
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Wireless notice:
This device complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS‐102 of the ISED radio frequency (RF) Exposure rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
WARNING! This device must be installed and used at a distance >5 cm from the body.
FCC Class B digital device notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>