shadeomatic Roller Basics Cordless Operated Shades Instruction Manual

INSTALLATION INSTRUCTIONS
ROLLER BASICS
Cordless Operated Shades

Roller Basics Cordless Operated Shades

Open Roll|
---|---
Deco Fascia|
Contoured Valance|

Cordless Operated with Open Roll

1. Install the Brackets
   Secure the roller shade installation brackets with the supplied screws. If shade was ordered as outside mount (OB), attach the supplied screw covers on to the bracket for a finished look.

2. Install the Shade
   DO NOT REMOVE THE RED PLASTIC CLIP. IT WILL DISENGAGE ONCE THE BRACKET HAS BEEN INSTALLED.

3. Install the Bracket Covers
   

Cordless Operated with Deco Fascia

1. Install the Fascia Brackets
   
   The magnet clips arrive pre-attached and evenly spaced to the Deco Fascia. Outside mount (OB) requires a T-Bracket installation. Space brackets evenly.
   Note: Do not attach the Deco Fascia until the shade has been installed.

2. Install the Brackets
   Secure the roller shade installation brackets with the supplied screws. If shade was ordered as outside mount (OB), attach the supplied screw covers on to the bracket for a finished look.

3. Install the Shade
   DO NOT REMOVE THE RED PLASTIC CLIP. IT WILL DISENGAGE ONCE THE BRACKET HAS BEEN INSTALLED.

4. Install the Deco Fascia
   

5. Install the Returns (Optional)
   

Metal returns (Outside mount only) include a plastic corner connector. Plastic returns (Inside mount with Outside Mounted fascia) snap on the end of the fascia.

1. Install the Brackets
   Secure the roller shade installation brackets with the supplied screws. If shade was ordered as outside mount (OB), attach the supplied screw covers on to the bracket for a finished look.

2. Install the Fascia Brackets
   Note: Prior to installing the installation brackets to the wall, insert the valance onto each installation bracket.
   

3. Install the Return (Outside Mount Only – Optional)
   

4. Install the Shade
   

DO NOT REMOVE THE RED PLASTIC CLIP. IT WILL DISENGAGE ONCE THE BRACKET HAS BEEN INSTALLED.

Operate the Cordless Shade

Pull the bottom handle and let go to lock it into the desired length.

Adjust the Tensioner

To lower tension or speed, turn the left side wheel towards the back of the shade. To add tension or speed, turn the left side wheel towards the front of the shade while holding the bottomrail.
To shorten the length of the shade, turn the right side wheel towards the front of the shade. To lengthen the shade, turn the right side wheel towards the back of the shade.

Child Safety

Young children can STRANGLE in cord loops and in the loop above the cord stop. They can also wrap cords around their necks and STRANGLE.

• Always keep cords out of children’s reach.
• Move cribs, playpens and other furniture away from cords. Children can climb furniture to get to cords.
• Do not tie cords together.
• Make sure cords do not twist together and create a loop.

WARNING STRANGULATION HAZARD – Young chidren can be strangled by cords. Immediately remove this product if a cord longer than 22 cm or a loop exceeding 44 cm around becomes accessible.

Rev 7/21 Print 7/21
1030741 • rev 10/21

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>