Skymen JP-020S Ultrasonic Cleaner Instruction Manual

Skymen JP-020S Ultrasonic Cleaner

Application:
Electronic factory, utensil, hardware, machinery, communication, biological, medical instrument, glasses, Optical, Jewelry, clock, watch, chemical, Textile, auto part, Ships, aviation, mining area, commercial cleaning.

PREFACE OF USE

Thanks for purchase ultrasonic cleaner, Please read the instruction manual carefully before operation to avoid damage to the machine or any danger to personal safty. And please keep it for reference.
Please make sure power supply is in rated range, before plug the machine. Refitting is strictly prohibited! Attention that the control panel will be eroded by organic solution, strong acid and strong alkali.

THE BASIC PRINCIPLE OF ULTRASONIC CLEANING

The cleaner uses ultrasonic energy (40 kHz) in the form of sound waves to create millions of tiny microscopic bubbles in the solution that even works its way into holes and hidden cavities, loosening dirt on all surfaces that the solution touches. This action called cavitation, occurs thousands of times per second to gently yet thoroughly scrub contamination off the article being cleaned. When you lift the item out of the cleaner, it’s microscopically clean.

NOTES BEFORE USE

1. Ensure the power supply is in rated range before power cable is connected. Refitting is strictly prohibited! Attention that the control panel will be eroded by organic solution. strong acid and strong alkali.
   

2. Ensure the earth wiring is well connected before starting.

3. Ensure the power switch should be placed in the “O” position before starting.

4. Do not operate if the tank is empty, or ultrasonic generator will be damaged. If heating is needed .the water level shouldn’t be less than 2/3.

5. Please close the lid to reauce noise and pay attention to water and steam in case of burning skin while open the lid.

6. Do not relocate the machine when fluid in the tank in case of overflow.

7. Please choose the proper sizes or types of baskets according the object to be cleaned

8. Suggest using water-soluble liquid for bentchtop ultrasonic cleaners. Strong acid or flammability cleaner is forbidden. Heater is forbidden when using flammable liquid (such as alcohol, solvent cleaner etc.) to clean objects. ultrasonic vibration for a long time cause temperature of liquid increase, caution fire!

9. Do not use the machine in severe environment :
   The place where temperature changes fiercely; The place where humidity is too high and is easy to produce dew; The place where vibration or impact is strong; The place where exists corrosive gas or dust; The place where water, oil or chemicals splash; The place where is filled with explosive and flammable gas;

PRODUCT DRAWING&INDICATION

Digital timer heater adjustable with degas series

OPERATION STEPS

Before Operating Your Cleaner

1. Add cleaning liquid
   Add appropriate amount of cleaning solution to the cleaning tank according to the cleaning. Ensure that the liquid level is not lower than the inner tank height by 2/3 when the heating is turned on. It is forbidden to heat when using flammable liquids such as alcohol, gasoline, etc. Long-term vibration will cause liquid increase in temperature, beware of fire!
   

2. Open power
   Plug the cleaner into a grounded outlet. Turn on the power switch at the tank back, then machine is power on.(“O” is closed, and “-” is open).
   

Start ultrasonic cleaning

At first setting, the time is random. Touch “Time+” or “Time-” to set time, press “ON/OFF” the ultrasonic active and the machine start to countdown.

Heat

At first setting, the temperature is random. Touch ”Temp+” or ”Temp-” to increase or decrease temperature. Press “ON/OFF” button ,heat will active before reaching the setup temperature.

Additional functions

Degas:ultrasonic work for 9seconds,stop for 6seconds, work for 9seconds ets etc. till time is out. Semiwave: touch “Semiwave”to start half-wave Mode, ultrasonic power will cut in half.

Power OFF

Presss the ultrasonic “ON/OFF” button, the ultrasonic stops and the light is off. Presss the heater “ON/OFF” button, the heating stops and the light is off. And then cut off the power, empty out the liquid, clean the tank and the unit with cloth for next use.

SPECIFICATIONS

(The size is manual measurement, please refer to the actual product)

> >>>>> Digital timer heater adjustable with degas series <<<<<<

MODLE| FREQUENCY (KHZ)| TANSDUCER (PCS)| Capacity (L)| Tank size (mm)| UNIT SIXE (MM)| Hratng poeer (W)| Utrasoni power (m)| tIME(m)| Temperature(C)
---|---|---|---|---|---|---|---|---|---
JP-020S| 40| 2| 3.2| 240x135x100| 270x185x230| 100| 120/60| 0-30| roomtemp-80
JP-030S| 40| 3| 4 . 5| 300x150x100| 330x200x235| 200| 180/90| 0-30| room temp-80
JP-031S| 40| 3| 6.5| 300x150x150| 375x200x275| 200| 180/90| 0-30| room temp-80
JP-040S| 40| 4| 10| 300x240x150| 380x290x280| 200| 240/120| 0-30| room temp-80
JP-050S| 40| 5| 14.5| 300x240x200| 370x270x325| 200| 300/150| 0-30| room temp-80
JP-060S| 40| 6| 15| 330x300x150| 400x350x280| 300| 360/180| 0-30| room temp-80
JP070S| 40| 8| 20| 330x300x200| 400x300x200| 300| 480/240| 0-30| room temp-80
JP-080S| 40| 8| 22| 500x300x150| 585x330x280| 500| 480/240| 0-30| room temp-80
JP-100S| 40| 10| 30| 500x300x200| 585x327x333| 500| 600/300| 0-30| room temp-80
JP-120S| 40| 12| 38| 500x300x250| 595x345x385| 800| 720/360| 0-30| room temp-80

APPLICATION

Full series standard ultrasonic cleaners are made up of high quality stainless steel plate, which is corrosion resistance and long lifespan, adopt with high quality ultrasonic transducer and advanced adhesive technology, high electro- acoustic conversion efficiency and strong ultrasonic power output. Equipped with automatic constant temperature heating device, heating range: room temperature-80°( Skymen ultrasonic cleaner widely applied to industry of precision electronics, painting, filter system, watch-clocks, glass, metal, jewelry, and medical instruments deaning etc.

dust partides, etc
Electrical& electronic machine| Tube parts, cathode ray tube, printed circuit board, quartz parts, electronic components, telephone switching equipment, speaker components, power meter, LCD glass, core iron parts, computer floppy disk, vido parts, hoop parts, head, photo die mask. etc| Fingerprint, powder, cutting oil, stamping oil, iron filings, polishing materials, wanut powder, polishing wax, resin,

dust etc

Precision machine| Bearing, sewing machine parts, typewriter, textile machine, optical mechanical device, gas valve, watches, cameras, metal filter element, etc.| Machine cutting oil, iron flings, polishing powder, finger print oil, grease, dirt etc.
Optical device| Glasses, lens prism, optical lens, filter lens, glass device, film, optical fiber, etc.| Plastic, resin, paraffin, finger printing, etc
Hardware& machinery parts| Bearing, gear, bal, metal shaft parts, tools, adjustable valve, and cylinder parts, burner, copm pressors, hydraulic press, gun and ultracentrifuge, city water faucet, etc.| Cutting oil, iron filings, grease polishing powder, finger printing, and so on.
Medical instrument| Medical instrument, denture, etc.| Iron filings, polishing powder, oil, stamping oil, dirt. etc.
Electroplate| Galvanized parts, mold, stamping parts. etc.| Polishing scrap iron, oil, black iron shell, rust, oxidation shell, scrap iron, polishing powder, stamping oil, dirt etc
Car parts| Poston ring, carburetor, flow meter housing. compressor shell, electrical components. etc| Iron filings. polishing powder, oil, stamping oil, dirt, etc
Chemical fiber| Chemical or artificial fiber nozzle filter protector. chemical fiber texture. etc| Chemical colloid, glue, and other solid material, dust, etc

MAINTENANCE

Maintenance

Regularly use high-pressure wind blown away dust for electrical parts, Clean the tank at least once a week

Troubleshooting

No

| Problems| Possible causes| Solutions|

Remarks

---|---|---|---|---
1| No Ultrasonic| A. Power supply not connect
B. Fuse broken
C. Cable short circuit
□. Transducer short circuit
E. PCB Board broken F. Other reasons| A. Check and plug power switch
B. Check the fitted power supply and change the same specification fuse
C. Connect fitted cable or replace a new
□.Inquiry our after service engineer
E. Check the broken part and change it
F. inquiry our after service engineer|
2| Time control failure| A.Timer failure B.other reasons| A. Replace timer or digital control panel
B. inquiry our after service engineer|
3| No heating| A. Heater power switch bad linkage
B. Fuse burn out
C. Heating pad burn out
□.Digital display board out of control
E.Other reasons| A. Check heating plug and connect well. check outlet line with multimeter: if OK and resistance value is few hundred OHMs.
B. Change the same specification fuse
C. Replace the bad heating pad if open circuit
D. Check the broken part and change it
E. inquiry our after service engineer| Suggestion 50-60’C
4| Temperature control failure| A. Thermostant loosen
B. Thermostat tube broken C. Digital display out of control D. Other reasons| A. Fasten the thermostat header.
B. Replace thermostat.
C. Check the broken part and change it. Inquiry our after service engineer|
5| Not well cleaning| A. too high too low liquid surface
B. too high too low temperature
C. Not suitable cleaning liquid
D. Other reasons| A. Adjust liquid into the best surface
B. Adjust temperature into the most fitted
C. Stop and switch off power supply, replace suitable liquid after the previous liquid cool down D. inquiry our after service engineer| Suggestion 50-60’C
6| Electric leakage| A. The equipment ground wire is not connected well.
B. The internal live line or neutral line of the equipment falls off| A. Check whether the internal ground wire and power cable grounding of the device are connected.
B. Check if the internal live wire or neutral wire of the machine is fall off.|
7| Scrap| Not repairable or discarded| According the state related laws and desingnated units for desingnated medical equipment|
8| Other problems| | | | Consult our after service: +86-755-297847256|

WARNINGS

Dono! operate when tank is empty

Donot use flammable solution

Please use the ground wire correctly

Caution pollution when disposal this product.

CUSTOMERS SUPPORT

Skymen Cleaning Equipment Shenzhen Co.,L TD

TEL: +86-755-29784256 FAX: +86-755-29784236
Email: skymen@skymen.cc Website: www.skymen.cc
Factory Add: Building F12,No.11 O,first Industrial park of Li Song
Lang,GuangMing new district,Shenzhen,China.
Marketing Center: 3F, A1 Block, Fuhai Technology Park Building,
FuYong Steet, Baoan district, Shenzhen, Guangdong, China.

Solemnly Declare
It is sorry to that the design and specification of our products are subject tochange without notice.
All information in this manual has been carefully proofread and made every effort to be accurate. We reserve the right to interpret any printing mistakes. The copyright of this manual belongs to Skymen Cleaning Equipment Shenzhen Co.,L TD. No copy or reprint is strictly prohibited without written authorization. The company will pursue its legal responsibility.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>