PHILIPS TownGuide Performer Pole Light Owner’s Manual
- August 31, 2024
- Philips
Table of Contents
PHILIPS TownGuide Performer Pole Light
Product Information
Specifications
- Product Name: TownGuide Performer BDP100 LED50/730 II DS PCC GR 62P
- Light Source: LED module 5000 lm
- Color Temperature: 730 warm white
- Safety Class: II
- Distribution: Symmetrical
- Cover Material: Polycarbonate bowl/cover frosted
- Color: Grey
- Mounting: Post-top for diameter 62 mm
Usage Instructions
Installation
- Ensure the power supply is switched off before starting the installation.
- Mount the luminaire securely on a post with a diameter of 62 mm using appropriate fixtures.
- Connect the screw connection block to the power supply following the provided guidelines.
Operation
Once installed, switch on the power supply. The luminaire will emit warm
white light with a luminous flux of 5000 lm.
Maintenance
Regularly clean the cover and optics of the luminaire to ensure optimal
light output. In case of any issues, refer to the user manual for
troubleshooting steps.
FAQ
-
What is the warranty period for the TownGuide Performer BDP100 LED50/730 II DS PCC GR 62P?
The warranty period is 5 years from the date of purchase. -
Can the LED module be replaced in this luminaire?
Yes, the LED module in this luminaire is replaceable.
BDP100 LED50/730 II DS PCC GR 62P
TOWNGUIDE PERF FLAT CONE, LED module 5000 lm, 730
warm white, Safety class II, Distribution symmetrical, Polycarbonate
bowl/cover frosted, Grey, Post-top for diameter 62 mm
The TownGuide Performer family consists of six recognizable, yet modern
shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire
has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl
(except Tzero, which is only available with a clear bowl). With an extensive
range of lumen packages, neutral white or warm white LED lights sources, and a
range of dedicated optics for lower mounting heights, it’s easy to select the
version that best suits the specific requirements of your project. All this
combined with a long life expectancy of 100,000 operating hours. In addition,
TownGuide Performer has a variety of control system options that can make this
luminaire an integral part of smart energy-reduction programs. This includes
LumiStep, DynaDimmer, and LineSwitch stand-alone dim control, and Coded Mains
group control, right up to seamless remote connectivity with Interact lighting
management software. Installation is easy. Thanks to the bayonet whistle
connector with integrated gland located in the spigot, there’s no need to open
the luminaire for installation. The Signify Service tag app offers direct
access to all relevant data, ensuring maintenance is easy too. Philips has
made every effort to make the Total Cost of Ownership (TCO) of the luminaire
as attractive as possible. And as TownGuide Performer is a dedicated LED
luminaire, compatible with a variety of control systems, there are significant
energy and maintenance cost savings compared with conventional lighting.
Product data
General Information
- Lamp family code LED50 [LED module 5000 lm]
- Light source replaceable Yes
- Number of gear units 1 unit
- Driver included Yes
- Light source engine type LED
- Service tag Yes
- Product family code BDP100 [TOWNGUIDE PERF FLAT CONE]
- Lighting Technology LED
- Value ladder Performance
- Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
Light Technical
- Upward light output ratio 3
- Luminous Flux 3,700 lm
- Standard tilt angle posttop 0°
- Standard tilt angle side entry –
- Luminous Efficacy (rated) (Nom) 101 lm/W
- Correlated Color Temperature (Nom) 3000 K
- Color rendering index (CRI) 70
- Light source color 730 warm white
- Optical cover type Polycarbonate bowl/cover frosted
- Luminaire light beam spread 50° x 70°
- Optic type outdoor Distribution symmetrical
Operating and Electrical
- Input Voltage 220-240 V
- Line Frequency 50 to 60 Hz
- Inrush current 45 A
- Inrush time 0.285 ms
- Power Consumption 36.5 W
- Power Factor (Fraction) 0.93
- Connection Screw connection block 5-pole
- Cable –
- Number of products on MCB of 16 A type B 10
Temperature
- Ambient temperature range -40 to +35 °C
Controls and Dimming
- Dimmable No
- Driver/power unit/transformer Power supply unit regulating
- Control interface –
- Constant light output No
Mechanical and Housing
- Housing Material Aluminum
- Reflector material –
- Optic material Acrylate
- Optical cover material Polycarbonate
- Fixation material Steel
- Housing Color Grey
- Mounting device Post-top for diameter 62 mm
- Optical cover shape Conical flat
- Optical cover finish Clear
- Overall height 209 mm
- Overall diameter 570 mm
- Effective projected area 0.051 m²
Approval and Application
- Ingress protection code IP66 [Dust penetration-protected, jetproof]
- Mech. impact protection code IK10 [20 J vandal-resistant]
- Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
- Sustainability rating Lighting for circularity
- Protection class IEC Safety class II
- Flammability mark –
- CE mark Yes
- ENEC mark ENEC mark
- Warranty period 5 years
- EU RoHS compliant Yes
Initial Performance (IEC Compliant)
- Luminous flux tolerance +/-7%
- Initial chromaticity (0.43, 0.40) SDCM <5
- Power consumption tolerance +/-10%
- Init. Color Rendering Index Tolerance +/-2
- Standard Deviation of Colour Matching SDCM≤5
- (McAdam ellipse)
Over Time Performance (IEC Compliant)
- Control gear failure rate at median useful life 100000 h 10 %
- Lumen maintenance at median useful life* 100000 h 93
Application Conditions
- Performance ambient temperature Tq 25 °C
- Maximum dim level Not applicable
Product Data
- Order product name BDP100 LED50/730 II DS PCC GR 62P
- Full product name BDP100 LED50/730 II DS PCC GR 62P
- Full product code 871951418118200
- Order code 910925868116
- Material Nr. (12NC) 910925868116
- Numerator – Quantity Per Pack 1
- Net Weight (Piece) 6.200 kg
- EAN/UPC – Product/Case 8719514181182
- Numerator – Packs per outer box 1
- EAN/UPC – Case 8719514181182
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless
otherwise agreed by Signify. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, August 21 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>