EMGA 420070 Milantoast Contact Grill User Manual

420070 Milan toast Contact Grill
User Manual

CONTACT GRILL
KONTAKT GRILL

420070 Milan toast Contact Grill

420070-720072-420074-420075-420077-420079-420080-420084
ORIGINAL USER MANUAL
ORIGINAL BENUTZERHANDBUCH

1600X

1,73| Kw
13,2| Kg
32x38x17| Cm

1603X

2,76| Kw
19,5| Kg
46x38x17| Cm
1605X

3,50| Kw
28| Kg
64x38x17| Cm

Thermostat

On / Off switch with indicator light

Removable grease tray

Lid bracket with handle

Lower grilling plate

Upper grilling plate

Compensating springs adjustment

CAST IRON CONTACT GRILL

Thank you for purchasing this high-quality appliance, original MILANTOAST, made in Italy. Please read the instructions carefully before using it. Follow the safety instructions and keep the manual for future reference.

PRELIMINARY OPERATIONS

Carefully remove the product from the packaging and keep the original packaging for any return of the product.Remove all plastic, cardboard, any other protective element, accessories must be removed.
The adhesive plastic film covering the stainless-steel parts must be removed before putting into operation unit.Remove any adhesive residue with an available stainless-steel cleaner on the market.
Data sheet and warnings must not be removed! The packing items should not be left within the reach godchildren. If the appliance shows signs of damage contact the seller.

IMPORTANT SAFETY INSTRUCTIONS

The safety instructions of this appliance comply with the recognized rules of technology. Nevertheless, we draw your attention to the following safety instructions:
Connect the device only to a power source whose voltage corresponds to the information on the nameplate and complies with the applicable standards. Make sure that the  supply voltage of the distribution network corresponds to that indicated on the appliance plate. The plate is located on the side of the appliance. Make sure that the power  outlet is equipped with earth contact and that the electrical system follows current regulations.
In case of incompatibility between the socket and plug of the appliance, have the socket replaced with another of a suitable type by professionally qualified personnel. Do not  use single or multiple extension cords and adapters. It is recommended that the power outlet is protected by a 0.03 A (30mA) differential switch. We recommend connecting  an equipotential bonding conductor to the M5 clamp located nearby input of the appliance power cable. The clamp, if present, is identified with the symbol

Always unplug after each use, before cleaning and before storing. Never remove the plug from the socket for the connection cable. Do not let the connecting cable hang  down. Make sure that the connecting cable does not touch the hot device.
If the appliance is placed near walls, kitchen furniture, decorative finishes, etc. it is recommended that these are made of suitable and non-combustible materials. The utmost  attention must be paid to fire prevention standards. We also recommend keeping the appliance at one minimum distance of 20 cm from the surrounding walls and at a large  distance from the ceiling upwards.
Do not cover the device: risk of fire!
During use, be careful not to obstruct the ventilation openings of the appliance.
In the event of damage, the power cable must be replaced with an original cable only by competent personnel.
Never use this device if it has been dropped or shows visible signs of damage. Have repairs to this device carried out by competent personnel only.
Keep adequate space to place the machine. The support surface must be stable and adequately resistant to the heat given off by the appliance and its weight.
Once the machine is installed, make sure that the plug is always accessible and the data sheet clearly visible.
Any use of the plate for purposes other than those described in this manual is to be considered improper and therefore dangerous. Do not use the lever (4) as a carrying  handle. The bottom may suddenly tip over and cause injury. Always use the device with the fat collection box in the position as shown in the figure.
Do not leave the  appliance unattended during use. Do not use outdoors. Do not let children or disabled people use it. Do not use in humid environments. Do not immerse or bathe in water  or other liquid. Do not place the device on hot surfaces or near flames. Always keep the device in a dry and frost-free place. The appliance is not water jet proof and therefore  must not be cleaned with this system. Do not cover the appliance as there might be a fire hazard. Disconnect the plug when not in use. Disconnect the plug before moving it. Do not pull on the power cord or the appliance itself to remove the plug from the socket. Prevent the power cord from getting in contact with the appliance. Make  sure children do not pull on the cord and cannot break the device or be crushed by it. Also inform other users about possible dangers.

Danger of burns . Do not touch the hot surfaces of the appliance.
The temperature of hot surfaces can be remarkably high when the appliance is working. Always use the handles and control knobs.
Before moving the appliance, let it cool down. Do not use if it has been exposed to temperatures below 0 ° C in the Previous 24 hours.

DEVICE CONNECTION, USAGE AND OPERATION

Contact Grill for commercial use only. This contact grill is an appliance with fixed and mobile heating surfaces intended for cooking solid food (e.g. Sandwiches, hamburgers,  meat, fish, vegetables, cheese). Any other use is to be considered improper and therefore dangerous. The panini plate is not suitable for flambé! Never spill liquid of any kind  on the food to be grilled or on the grid surfaces.
Insert the power plug into the power outlet. Increase the temperature of the heating surfaces by turning the knob clockwise. Reduce the temperature by turning the knob counterclockwise.
The orange light (2) when turned on, it displays the heating element operating time. The contact grill functions automatically through the adjustable thermostat with knob (1).  The temperature is kept steady at the set value once the steady state condition is reached.
In 3,5Kw models (provided with 2 switches) the right part of the grill is controlled by the right switch and the left part by the left switch.
After usage, always unplug it.

RECOMANDATIONS FOR USE

Always follow the requirements for safe use (CAP 2)
When grilling with closed plates, cooking time and energy consumption is reduced. The optimal cooking time depends on different factors, such as quality, freshness, weight,  thickness, consistency, and temperature of the food as well as individual preferences. The thinner and more sensitive to heat is the food, the lower the grill temperature and  the cooking time required. For example, for the preparation of simple sandwiches, a temperature of 230 ° C is sufficient. Occasionally check the state of cooking of the food on the grill.
Set temperatures above 260 ° C only in exceptional cases and only during the actual cooking time to avoid excessive stress on the heating elements. The surface of the plate  must rest on the food as evenly as possible.
It is possible to adjust the distance and inclination of the upper plate to that of the lower plate. To do so, first grasp the upper plate from the handle on the lid adjustment lever (4).
Lower the upper plate to the desired position on the food to be grilled, then leave it carefully. Do not press the upper plate on the food to be grilled, especially with marinated  foods. This allows steam to come out causing risk of burns!
It is best to use wooden tools to place, turn and remove food from grilling or heat resistant plastic tools. Do not cut or scrape objects with sharp edges on the surfaces of the  grill since they could be damaged.
As soon as the set temperature is reached (after 10-15 minutes) the light goes out and it will be then kept steady. You can now place the food to be grilled on the bottom  surface of the grill (5) and gently lower the top plate (6) onto the lid bracket (4).
Adjust the temperature by turning the thermostat knob (1) clockwise (higher temperature) or counterclockwise (lower temperature).
Carefully open the top plate (6) from the lid bracket (4) completely before turning or removing food. Turn off the device after each use using the thermostat knob (1) and the  on / off switch (2) and remove the power plug.
The contact pressure is preset for the most common applications but can be changed if necessary.
To do this, turn the two screws (7) on the bottom of the lid bracket holder evenly with one 8 mm hex key on the cold device: the contact pressure increases when the screws are loosened.
Contact pressure is reduced when screws are tightened. When a new device is heated for first time, there may be a slight development of smoke and odor, which is harmless and no longer occurs after the first cleaning.

CLEANING

Always follow the safety instructions!
Before cleaning the device, pull out the plug and allow it to cool down to a room temperature. The plate is not water jet proof and therefore should not be cleaned with this  system. Never clean the device under running water. Do not immerse the device in water. Never put the device in the dishwasher. Clean only with a damp cloth. Do not use  aggressive cleaners and abrasives. Hold the cover firmly when cleaning the plate surfaces so that the device does not tip over.
The surfaces of the grill have a special ceramic coating and are therefore easier to clean. In order to maintain the grilling properties of the contact grill, all surfaces must be  cleaned regularly and carefully. Remove food and fat residues from the plates after each use. Empty the grease tray (1) after each use, then clean it with warm water, a delicate detergent and a sponge or soft cloth.
You can remove food from the surface of the grill with a wooden spoon and first push it into the grease tray.
Dirt can also be removed with the included cleaning brush, but this should be done only in exceptional cases to protect the plates. Therefore, it is best not to let it dry food  residues on the grill. Finally, clean the grill surfaces with a clean cloth moistened with clean water.
After cleaning, carefully dry all parts of the device with a dampened, soft cloth. Keep the clean plate in a dry and frost-free place.

MAINTENANCE

In case handle lifting becomes noisy, you can pour a few drops of oil into the two rear holes in correspondence with the word OIL.

In case of fault, contact the manufacturer. Check regularly, if used frequently, at least one once a year the conditions of the device, the connection cable, the hinges, the  screws, the thermostat and on / off switch with indicator light. Only original spare parts can be used.

DISPOSAL

The symbol on the device and on the packaging indicates that this device should not be treated like ordinary household waste. Every consumer is legally obliged to  dispose of old devices separately from household waste and e.g. be delivered to a collection point in your community / district. This ensures that old devices are properly  recycled in order to avoid negative effects on the environment.

WARRANTY

1. The purpose of the warranty is to insure the buyer against any manufacturing defect.
2. The duration is one year from the documented purchase date. During this period, the warranty also convers spare parts and labor. The warranty is at the retailer’s  laboratory, therefore the transport costs that are charged to the customer. Any replaced parts become exclusive property of the retailer.
3. The warranty is valid in all countries of the European Union.
4. The warranty does not cover the necessary interventions:
   a) – breakage caused by knocks and falls
   b) – connections to higher electric voltage than the indicated one.
   c) – normal wear of the appliance.
   d) – parts damaged by neglect and / or tampering.
5. Under this warranty, the manufacturer cannot be held liable responsible for material damage or accidents
   to people, resulting from an installation that does not comply with safety standards in force and for:
   a) faulty power socket, absence of earth connection, etc.
   b) unsuitability of the product for the use for which the buyer intends to use it.

DECLARATION OF CONFORMITY

MILANTOAST , given the positive outcome of the test and inspection reports, declares under its own
responsibility that the Products GRIDDLE GRILL MILANTOAST identified with the codes
1602x, 1603x, 1605x comply with the following Directives:
2014/35/UE (LVD), 2014/30/UE (EMC), 1935/2004 (FOOD CONTACT), DM 21/03/1973 (FOOD CONTACT)
They also comply with the following standards: 2011/65/CE (RoHS)
It is also declared that these products do not contain asbestos and / or mercury elements.

Sublimate 10/01/2020

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>